Cyrusher Sports Team
www.cyrusher.com
7/ 27
P08: Speed Limit Setting.
Range: 1-100KM;
If setting data is 100KM,which means there is no speed limit, however, the real speed limit of
e-bike is controlled by motor and controller. You can only set the bike computer speed limit
within the given the range fixed by motor and controller. For example, if the motor and
controller fixed top speed limit is at 40KM/H, you can only set lower top limit such as 35KM/H,
then the e-bike will keep run within the top speed limit-- 35KM/H; If you set 50KM/H, the
real top speed limit is only 40KM/H;
P09: Zero boost or Non-Zero Boost Setting.
Range: 0 means zero boost; 1 means non zero boost.
In the zero boost also called hard boost which means, once you use the throttle or pedal
assistant, you get will push from the motor immediately; In non-zero boost, you have to use
pedal first to move the e-bike to some certain speed and the throttle or PAS will be active.
P10: Driving Modes Setting;
Range:
0 –PAS only, the throttle is not working;
1—throttle only, PAS is not working；
2—both throttle and PAS are working;
P11: PAS Sensitivity Setting
Range: 1-24,
This technical setting is only for engineer setting, do not modify or change the setting.
P12: PAS Strength Setting
Range: 1-5,
This technical setting is only for engineer setting, do not modify or change the setting.
P13: PAS Magnetic Sensor Setting
Range: 5/ 8/12
This technical setting is only for engineer setting, do not modify or change the setting.
P14: Controller Max Current Limit Setting
Range: 1-20A;
