D-Link WDA-2320 RangeBooster G User manual

2D-Link WDA-2320 User Manual
Table of Contents
Table of Contents
Product Overview ...................................................4
Package Contents..............................................................4
System Requirements .......................................................4
Introduction.......................................................................5
Features.............................................................................6
Hardware Overview ........................................................... 7
Installation...........................................................8
Getting Started ..................................................................8
Remove Existing Installations .....................................8
Disable Other Wireless Adapters.................................9
Wireless Installation Considerations................................11
Software Installation........................................................ 12
Windows Vista™Installation ......................................13
Push Button Configuration (PBC) .............................16
Windows®XP Installation .........................................19
Push Button Configuration (PBC) .............................21
Configuration ...................................................... 24
D-Link Wireless Connection Manager..............................24
Windows Vista ..........................................................25
Wireless Networks ................................................25
Wi-Fi Protected Setup (WPS)................................26
Personal Identification Number (PIN) ...................27
My Wireless Networks ..........................................29
Add Profile ............................................................30
Modify Profile .......................................................31
Support.................................................................32
About ....................................................................33
Windows®XP............................................................ 34
Wireless Networks ................................................34
Wi-Fi Protected Setup (WPS)................................35
Personal Identification Number (PIN) ...................36
My Wireless Networks ..........................................38
Add Profile ............................................................39
Modify Profile .......................................................40
Support.................................................................41
About ....................................................................42
Connect to a Wireless Network ................................. 43
Using Vista™....................................................................43
Connect to a Wireless Network ................................. 45
Using Windows®XP........................................................45
Disabling The Windows®XP Utility ........................... 46
Wireless Security ................................................. 48
What is WPA?..................................................................49
Configure WPA/WPA2 Passphrase ..................................50
Using the D-Link Utility ............................................. 50
Using the Windows Vista™Utility ..............................52
Using the Windows®XP Utility .................................54
Configure WPA/WPA2 .....................................................56
Using the D-Link Utility ............................................. 56

3D-Link WDA-2320 User Manual
Table of Contents
Configure 802.1x.............................................................58
Using the D-Link Utility ............................................. 58
Troubleshooting ................................................... 60
Wireless Basics ................................................... 65
Wireless Modes................................................... 69
Networking Basics ................................................ 70
Check your IP address..................................................... 70
Windows®XP/2000 Users ........................................70
Windows Vista™Users ..............................................70
Statically Assign an IP address........................................ 71
Windows®XP/2000 Users ........................................71
Windows Vista™Users ..............................................72
Technical Specifications ......................................... 73
Contacting Technical Support................................... 75
Warranty ........................................................... 76
Registration........................................................ 81

4D-Link WDA-2320 User Manual
Section 1 - Product Overview
• D-Link WDA-2320 RangeBooster G™Desktop
Adapter
• Manual and Warranty on CD
• D-Link Wireless Utility on CD
System Requirements
• A desktop computer with an available PCI slot
• Windows® Vista™, XP (Service Pack 2) or 2000 (Service Pack 4)
• 300MHz processor and at least 64MB of RAM
Product Overview
Package Contents

5D-Link WDA-2320 User Manual
Section 1 - Product Overview
Introduction
The D-Link RangeBooster G™WDA-2320 is a wireless desktop adapter featuring the latest technology to deliver data transfer rates
up to 108Mbps* in the 2.4GHz frequency. The WDA-2320 also works with 802.11b-compliant devices and when used with other
D-Link RangeBooster G™products delivers throughput speeds capable of handling heavy data payloads including real-time MPEG
video streaming. Plus, the WDA-2320 also includes a configuration utility to discover available wireless networks and create and
save detailed connectivity profiles for those networks most often accessed.
The D-Link RangeBooster G™WDA-2320 is a powerful 32-bit desktop adapter that installs quickly and easily into desktop computers.
Like all D-Link wireless adapters, the WDA-2320 can be used in infrastructure mode to connect with a wireless access point or router
for access to the Internet in your office or home network.
The WDA-2320 features robust security to help protect the wireless network from intruders, complying with the latest wireless
networking security protocols, including WEP encryption and Wi-Fi Protected Access (WPA) support for both 802.1x and WPA-PSK.
The products are also capable of supporting the government-grade AES encryption and upcoming 802.11i standards. The WDA-
2320 also includes a configuration utility to discover available wireless networks and create and save detailed connectivity profiles
for those networks most often accessed.
* Maximum wireless signal rate derived from IEEE Standard 802.11b/g specifications. Actual data throughput will vary. Network conditions and environmental factors,
including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors may adversely
affect wireless signal range.

6D-Link WDA-2320 User Manual
Section 1 - Product Overview
• 15 times faster - achieve data transfer speeds up to 108Mbps*; up to 15x faster than conventional 802.11b networks, when
used with other 802.11g devices
• Integrates into existing 802.11b wireless networks - no need to invest in all new devices; the
WDA-2320 is interoperable with existing 802.11b devices to provide a wireless data rate of up to 11Mbps*
• Stronger Security than ever before with WPA - Wi-Fi Protected Access authorizes and identifies users based on a
secret key that changes automatically at a regular interval, for example:
• TKIP (Temporal Key Integrity Protocol), in conjunction with a RADIUS server, changes the temporal key every 10,000
packets, ensuring greater security
• Pre Shared Key mode means that the home user, without a RADIUS server, will obtain a new security key every time
he or she connects to the network, vastly improving the safety of communications on the network.
• Extra Protection - 802.1x Authentication in conjunction with the RADIUS server verifies the identity of would be
clients
• User-friendly configuration and diagnostic utilities allow you to easily discover available wireless networks and create and
save detailed connectivity profiles
• Utilizes OFDM technology (Orthogonal Frequency Division Multiplexing)
* Maximum wireless signal rate derived from IEEE Standard 802.11b/g specifications. Actual data throughput will vary. Network conditions and environmental factors,
including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors may adversely
affect wireless signal range.
Features

7D-Link WDA-2320 User Manual
Section 1 - Product Overview
Hardware Overview
LEDs
Link
A steady light indicates a connection to a
wireless network.
A blinking light indicates activity on the
network.

8D-Link WDA-2320 User Manual
Section 2 - Installation
Getting Started
Installation
This section will walk you through the installation process. If you have a built-in wireless adapter, please disable it in device manager
before installing your D-Link adapter. Also, if you have previously installed another wireless adapter, please make sure any software
is uninstalled.
Before installing your new D-Link wireless adapter, please verify the following:
• Remove any previous installations of wireless adapters
• Disable any built-in wireless adapters
• Verify the settings such as the SSID and security settings of the network(s) you want to connect to
Remove Existing Installations
If you’ve installed a different manufacture’s adapter or a different model D-Link adapter, make sure the software is uninstalled before
installing the new software. Some utilities may cause a conflict with the new software. If you plan to use multiple adapters at different
times, make sure the utilities are not set to load when your computer boots up. Windows®XP users may use the built-in wireless
utility for all adapters.
To remove any old software:
Windows®XP/Vista™ users: Click Start > Control Panel > Add or Remove Programs.
Windows®2000 users: Click Start > Settings > Control Panel > Add or Remove Programs.

9D-Link WDA-2320 User Manual
Section 2 - Installation
Disable Other Wireless Adapters
Most newer laptops may include a built-in wireless adapter. To prevent any conflicts with the D-Link wireless adapter, it is recommended
to disable the wireless adapter (as well as any unused Ethernet adapters).
From the desktop, right-click on the My Computer icon and select Properties.
Click the Hardware tab and then click Device Manager. Scroll down the list and
click the +sign to the left of Network Adapters.
Right-click the adapter you would like to disable and select Disable.

10D-Link WDA-2320 User Manual
Section 2 - Installation
Click Yes to disable the adapter.
The adapter is now disabled. When disabled, a red X will be displayed.
Disabling the adapter will not remove the drivers. If you would like to use
the adapter, simply right-click it and select Enable.

11D-Link WDA-2320 User Manual
Section 2 - Installation
Wireless Installation Considerations
The D-Link wireless adapter lets you access your network using a wireless connection from virtually anywhere within the operating
range of your wireless network. Keep in mind, however, that the number, thickness and location of walls, ceilings, or other objects that
the wireless signals must pass through, may limit the range. Typical ranges vary depending on the types of materials and background
RF (radio frequency) noise in your home or business. The key to maximizing wireless range is to follow these basic guidelines:
1. Keep the number of walls and ceilings between the D-Link adapter and other network devices to a minimum - each
wall or ceiling can reduce your adapter’s range from 3-90 feet (1-30 meters.) Position your devices so that the number
of walls or ceilings is minimized.
2. Be aware of the direct line between network devices. A wall that is 1.5 feet thick (.5 meters), at a
45-degree angle appears to be almost 3 feet (1 meter) thick. At a 2-degree angle it looks over 42 feet (14 meters)
thick! Position devices so that the signal will travel straight through a wall or ceiling (instead of at an angle) for
better reception.
3. Building Materials make a difference. A solid metal door or aluminum studs may have a negative effect on range.
Try to position access points, wireless routers, and computers so that the signal passes through drywall or open
doorways. Materials and objects such as glass, steel, metal, walls with insulation, water (fish tanks), mirrors, file
cabinets, brick, and concrete will degrade your wireless signal.
4. Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances that generate RF
noise.
5. If you are using 2.4GHz cordless phones or X-10 (wireless products such as ceiling fans, lights, and home security
systems), your wireless connection may degrade dramatically or drop completely. Make sure your 2.4GHz phone
base is as far away from your wireless devices as possible. The base transmits a signal even if the phone in not in
use.

12D-Link WDA-2320 User Manual
Section 2 - Installation
Warning: Do NOT install the WDA-2320 Desktop Adapter into your computer before installing the driver software from the D-Link
CD.
Turn on the computer and Insert the D-Link WDA-2320 Driver CD in the CD-ROM drive.
If the CD Autorun function does not automatically start on your computer, go to Start > Run. In the run box type “D:\WDA-2320.
exe” (where D: represents the drive letter of your CD-ROM drive).
If the CD Autorun function does not automatically start on your
computer, type “D:\Drivers\setup.exe”. If it does start, proceed
to the next screen.
Click Install Drivers.
Software Installation

13D-Link WDA-2320 User Manual
Section 2 - Installation
The InstallShield Wizard window will appear.
Click Next to continue.
By default setup will install to the default location: C:\Program Files\D-Link\WDA-2320,
where C: represents the drive letter of your hard drive. To install to a different location click
Browse and specify the location. Click Next to continue.
Windows Vista™Installation

14D-Link WDA-2320 User Manual
Section 2 - Installation
Select the Program Files folder location. Click Next to continue.
WDA-2320 will start configuring your new software installation. This may take few
minutes.
Once the installation is complete, the InstallShield Wizard screen displays.
Click Finish to close the window.

15D-Link WDA-2320 User Manual
Section 2 - Installation
The Wireless Connection Wizard will now appear.
If you want to manually connect to a wireless network, refer to
page 17. The following instructions will connect you to a wireless network using Wi-Fi
Protected Setup (WPS).

16D-Link WDA-2320 User Manual
Section 2 - Installation
To connect to your network using the WPS push button configuration
method, click the virtual button as shown in the screenshot.
Push Button Configuration (PBC)
Press the WPS button on your access point or wireless router within 2
minutes to establish connectivity.
When this screen appears, you have successfully connected to your
wireless network. Click Next to complete your setup.

17D-Link WDA-2320 User Manual
Section 2 - Installation
To manually connect to your wireless network, select Manually connect
to a wireless network and then click Next.
Click the Scan button to display a list of wireless networks (site survey).
Click on the network name (SSID) and click Next.
Enter the network name (SSID) manually. If you enter the SSID incorrectly,
you will automatically be brought to the site survey page. Click Scan to
display the site survey page.

18D-Link WDA-2320 User Manual
Section 2 - Installation
Click Finish to continue. If you are prompted to reboot your computer,
select Yes, I want to restart my computer now.
When this screen appears, you are successfully connected to your wireless
network. Click Next to complete your setup.

19D-Link WDA-2320 User Manual
Section 2 - Installation
The InstallShield Wizard window will appear.
Click Next to continue.
By default setup will install to the default location: C:\Program Files\D-
Link\WDA-2320, where C: represents the drive letter of your hard drive.
To install to a different location click Browse and specify the location.
Click Next to continue.
Select the Program Files folder location.
Click Next to continue.
Windows®XP Installation

20D-Link WDA-2320 User Manual
Section 2 - Installation
The D-Link configuration wizard will now appear.
If you are using Windows®XP (SP2), you will have the option to use
either the D-Link utility or the built-in Windows®Wireless utility.
Click Next to continue.
The Wireless Connection Wizard will now appear.
If you want to manually connect to a wireless network, refer to page 22.
The following instructions will connect you to a wireless network using
Wi-Fi Protected Setup (WPS).