D-Link DSL-320B User manual

Setting Up Your
D-Link DSL 320B
Item code: 046330
Read this first

2
What’s in the box:
Before you start
Has your service gone live?
Don’t follow these instructions until you have
received confirmation that your broadband
service is ready to use.
Have you got your broadband username
and password to hand?
It’s in the email we send you when your service
is activated, it looks like this:
Introduction
Hello,
Looking to setup the D-Link 320B Ethernet Modem?
Follow this Quick Setup guide and you’ll be online
in no time at all.
Quick Installation
Service Broadband username format
Plusnet [e-mail]
Madasafish [e-mail]
Force9 usern[email protected]
Free-Online usern[email protected]
You don't need the CD’s Quick Installation to get
started. Go to Page 6 for a guide to using a Web
browser based setup.
1. Put the setup CD into your computer's CD/DVD
drive. The CD should automatically start.
2. If the disc doesn’t start, you can click the CD
icon with your right mouse button and select
Autoplay from the menu.
3. The start page will appear on your screen.
Click the Quick Installation Start button.

3
4. The first step of the Quick Installation is to
power up the modem.
6. Plug the adapter into a power socket, make sure
the power socket is switched on. 9. You will now connect the modem to your
computer.
5. Remove the sticky label from the modem.
7. Plug the power adapter into the modem.
8. Switch the modem on and check the power
light comes on. If it does, you can click the Next
button on your computer screen. If not, see the
Troubleshooting section on the last page of this
guide.

4
Item code: 046330
11. Connect the other end of the Ethernet cable
to a free network socket on your computer.
If the LAN comes on, click Next. Otherwise see
Troubleshooting on the last page of this guide.
10. Connect the Ethernet cable to the back of the
modem.
12. Next, connect your modem to your broadband
enabled phone line.
13. Plug one end of the DSL cable into the
microfilter. Then plug the microfilter into
your telephone socket.
15. Next, the modem will try to detect your
14. Plug the other end of the DSL cable into the
socket marked 'DSL'. The DSL light on the front of
the modem will flash and then stay on. If not, see
Troubleshooting on the last page of this guide.

5
17. Make sure the following settings are selected,
then click Next.
Your broadband username will take the following
form:
18. Next, type in your broadband username and
password.
19. The modem will now connect to your
broadband service using the settings you've
provided. This might take a few minutes to
complete.
16. Choose United Kingdom for Country and
Other for ISP.
Protocol: PPPoA
Encapsulation: VC Mux
VPI: [0-255]: 0
VCI: [32-65535]: 38
MTU: 1400
Service Broadband username format
Plusnet [e-mail]
Madasafish [e-mail]
Force9 usern[email protected]
Free-Online usern[email protected]

6
Web browser based setup
1. First, refer to the previous Quick Start section of
this guide to plug the hardware in. When done,
open your web browser.
In the Address line, type in 192.168.1.1, then
press Enter.
20. When the modem connects to your service
you'll see a congratulations screen. That's it, you’re
connected!
To start using your service click on the
Start Browsing button, or just open your web
browser.
Your broadband settings will be saved in the
modem, so you’ll connect whenever the modem is
switched on.
If your Quick Installation CD doesn't work, you can
set up your modem using a web browser.
You can also use this method to update your
modem settings after you’ve set it up, or access
Advanced Settings.
2. A login page will appear, enter the modem's
administration username and password and click
Log in. By default the details are:
Username: admin
Password: admin

7
Item code: 046330
Enter the following settings, then click
Apply Settings.
Manual ADSL connection Settings:
PPoE/PPPoA
PPPoE/PPPoA Internet Connection Type:
Username: Your broadband username
Password: Your broadband password
Connection Type: PPPoA VC-Mux
MTU: 1400
Idle Time Out: 0
VPI: 0
VCI: 38
See page 5 for the format that your broadband
username will take.
3. From the ADSL setup page you can choose
either the Setup Wizard or Manual Setup. Tick
Manual Setup.
Troubleshooting
The following table explains what the modem's
status lights mean:
Power Power light not on
Check the power adapter is plugged in.
Check the cable is firmly seated in the
back of the modem.
Check the plug socket is switched on and
working.
DSL DSL light flashing or off
Check your DSL cable connects your
modem to the microfilter.
Check that your microfilter is connected
properly.
Interference caused by other devices on
your telephone line are a common cause
of problems.
For more information about fitting
Microfilters visit our support pages at:
http://support.plus.net
LAN LAN light flashing or off
Check the Ethernet cable is plugged into
your modem.
Check the Ethernet cable is plugged into a
network socket on your computer.
Test with another Ethernet cable, in case
there’s a problem with the provided one.
Status What the Status light means:
The status light will flash to indicate that a
connection is active.
The status light comes on when you first
switch the modem on. If the light stays on
this means that the modem has failed its
internal test and should be restarted.