D-Link DIR-130 - Broadband VPN Router User manual

iD-Link DIR-130 User Manual
Table of Contents
Manual Overview
This manual contains the following sections:
Section 1 - “Product Overview” describes what is included with the DIR-130 router, and things to consider
before installing (page 1).
Section 2 - “Installation” describes how to install the router on your network (page 6).
Section 3 - “Configuration” describes how to configure the settings on your DIR-130 router (page 10).
Section 4 - “Troubleshooting” explains how to resolve common issues (page 56).
Section 5 - “Appendix” contains networking basics, technical specifications, technical support information,
warranty, GNU general public license, and registration information (page 60).

iiD-Link DIR-130 User Manual
Table of Contents
D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to
notify any person or organization of such revisions or changes.
Manual Revisions
Trademarks
D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the
United States or other countries. All other company or product names mentioned herein are trademarks or registered
trademarks of their respective companies.
Copyright © 2007 by D-Link Systems, Inc.
All rights reserved.This publication may not be reproduced, in whole or in part, without prior expressed written permission
Revision Date Description
1.0 February 8, 2007 • DIR-130 Revision A1 with firmware version 1.00
1.1 September 5, 2007 • Updated for firmware version 1.10
• Added Windows Vista™support

iiiD-Link DIR-130 User Manual
Table of Contents
Manual Overview ..........................................................i
Manual Revisions .................................................... ii
Trademarks.............................................................. ii
Product Overview ........................................................ 1
Package Contents....................................................1
System Requirements .............................................2
Features...................................................................3
Hardware Overview ................................................. 4
Connections....................................................... 4
LEDs ..................................................................5
Installation....................................................................6
Before you Begin .....................................................6
Connect to Cable/DSL/Satellite Modem ..................7
Connect to Another Router......................................8
Configuration.............................................................10
Web-based Configuration Utility ............................10
Setup Wizard ................................................... 11
Manual Configuration.......................................16
Dynamic (Cable)...........................................16
PPPoE (DSL) ............................................... 17
PPTP............................................................18
L2TP.............................................................19
Big Pond (Australia)......................................20
Static (assigned by ISP)............................... 21
Russian PPPoE (DSL) .................................22
Russian PPTP.............................................. 23
Network Settings..............................................24
DHCP Server Settings ................................. 25
DHCP Reservation....................................... 26
VPN Settings ................................................... 27
IPSec Settings..............................................28
PPTP/L2TP Settings ....................................31
Port Forwarding ............................................... 32
Application Rules .............................................33
MAC Filters ...................................................... 34
Website Filters ................................................. 35
Firewall Settings...............................................36
DMZ .............................................................36
Firewall Rules...............................................37
Advanced Network Settings.............................38
UPnP............................................................38
WAN Ping Respond .....................................38
WAN Port Speed .......................................... 38
Routing ............................................................39
Certificates....................................................... 40
User Groups .................................................... 41
Administrator Settings......................................42
Change Password ........................................42
Remote Management...................................42
Time and Date .................................................43
System Settings............................................... 44
Update Firmware ............................................. 45
Table of Contents

ivD-Link DIR-130 User Manual
Table of Contents
DDNS...............................................................46
System Check..................................................47
Schedules ........................................................48
Log Settings..................................................... 49
Device Information ........................................... 50
Log................................................................... 51
Statistics ..........................................................52
Active Session ................................................. 53
LAN Clients...................................................... 54
Routing ............................................................54
VPN .................................................................55
Help .................................................................55
Troubleshooting.........................................................56
Networking Basics .................................................... 60
Check your IP address ..........................................60
Statically Assign an IP address ............................. 61
Technical Specifications...........................................63
Default Factory Settings ...........................................64
Contacting Technical Support..................................65
Warranty .....................................................................66
GNU/Linux GPL.......................................................... 71
GNU General Public License................................. 72
Registration................................................................78

1D-Link DIR-130 User Manual
Section 1 - Product Overview
Product Overview
Package Contents
Note: Using a power supply with a different voltage rating than the one included with the DIR-130 will cause damage and void the warranty for this
product.
D-Link DIR-130 8-port
VPN Router
Power Adapter
Ethernet Cable
CD-ROM

2D-Link DIR-130 User Manual
Section 1 - Product Overview
System Requirements
Network Requirements • An Ethernet-based Cable or DSL modem
• 10/100 Ethernet devices
Web-based Configuration
Utility Requirements
Computer with the following:
• Windows®, Macintosh, or Linux-based operating
system
• An installed Ethernet adapter
Browser Requirements:
• Internet Explorer 6.0 or higher
• Mozilla 1.7.12 or higher
• Firefox 1.5 or higher
• Safari 1.0 or higher (with Java 1.3.1 or higher)
• Flock 0.7.14 or higher
• Opera 6.0 or higher
Windows®Users: Make sure you have the latest version
of Java installed. Visit www.java.com to download the
latest version.

3D-Link DIR-130 User Manual
Section 1 - Product Overview
• Advanced Firewall Features - The Web-based user interface displays a number of advanced network
management features including:
• Parental Controls - Easily applied content filtering based on MAC Address, URL, and/or
Domain Name.
• Filter Scheduling - These filters can be scheduled to be active on certain days or for a
duration of hours or minutes.
• Secure Multiple/Concurrent Sessions - The DIR-130 can pass through VPN sessions. It
supports multiple and concurrent IPSec and PPTP sessions, so users behind the DIR-130
can securely access corporate networks.
• User-friendly Setup Wizard - Through the easy-to-use web-based user interface, the DIR-130 allows
you to control what information is accessible to those on the network, whether from the Internet or from
your company’s server. Configure your router to your specific settings within minutes.
Features

4D-Link DIR-130 User Manual
Section 1 - Product Overview
Hardware Overview
Connections
Reset
Pressing the Reset button restores the router to
its original factory default settings.
Power Receptor
Receptor for the supplied power
adapter.
LAN Ports (1-8)
Connect Ethernet devices such as
computers, switches, and hubs.
Internet Port
The auto MDI/MDIX Internet port is the
connection for the Ethernet cable to the cable
or DSL modem.

5D-Link DIR-130 User Manual
Section 1 - Product Overview
Hardware Overview
LEDs
Status LED
A blinking light indicates that the
DIR-130 is ready.
Internet LED
A solid light indicates connection on
the Internet port. This LED blinks
during data transmission.
Power LED
A solid light indicates a proper
connection to the power supply.
Local Network LEDs
A solid light indicates a connection to an
Ethernet-enabled computer on ports 1-8.
This LED blinks during data transmission.

6D-Link DIR-130 User Manual
Section 2 - Installation
Before you Begin
Installation
This section will walk you through the installation process.
Please configure the router with the computer that was last connected directly to your modem. Also, you can only use
the Ethernet port on your modem. If you were using the USB connection before using the router, then you must turn off
your modem, disconnect the USB cable and connect an Ethernet cable to the Internet port on the router, and then turn
the modem back on. In some cases, you may need to call your ISP to change connection types (USB to Ethernet).
If you have DSL and are connecting via PPPoE, make sure you disable or uninstall any PPPoE software such as
WinPoet, Broadjump, or Enternet 300 from your computer or you will not be able to connect to the Internet.

7D-Link DIR-130 User Manual
Section 2 - Installation
If you are connecting the router to a cable/DSL/satellite modem, please follow the steps below:
1. Place the router in an open and central location. Do not plug the power adapter into the router.
2. Turn the power off on your modem. If there is no on/off switch, then unplug the modem’s power adapter. Shut down
your computer.
3. Unplug the Ethernet cable (that connects your computer to your modem) from your computer and place it into the
Internet port on the router.
4. Plug an Ethernet cable into one of the four LAN ports on the router. Plug the other end into the Ethernet port on your
computer.
5. Turn on or plug in your modem. Wait for the modem to boot (about 30 seconds).
6. Plug the power adapter to the router and connect to an outlet or power strip. Wait about 30 seconds for the router
to boot.
7. Turn on your computer.
8. Verify the link lights on the router. The power light, Internet light, and the LAN light (the port that your computer is
plugged into) should be lit. If not, make sure your computer, modem, and router are powered on and verify the cable
connections are correct.
9. Refer to page 10 to configure your router.
Connect to Cable/DSL/Satellite Modem

8D-Link DIR-130 User Manual
Section 2 - Installation
If you are connecting the D-Link router to another router to use as a switch, you will have to do the following before
connecting the router to your network:
• Disable UPnP™
• Disable DHCP
• Change the LAN IP address to an available address on your network.The LAN ports on the router cannot
accept a DHCP address from your other router.
To connect to another router, please follow the steps below:
1. Plug the power into the router. Connect one of your computers to the router (LAN port) using an Ethernet cable.
Make sure your IP address on the computer is 192.168.0.xxx (where xxx is between 2 and 254). Please see the
Networking Basics section for more information. If you need to change the settings, write down your existing settings
before making any changes. In most cases, your computer should be set to receive an IP address automatically in
which case you will not have to do anything to your computer.
2. Open a web browser and enter http://192.168.0.1 and press Enter. When the login window appears, set the user
name to Admin and leave the password box empty. Click Log In to continue.
3. Click on Advanced and then click Advanced Network. Uncheck the Enable UPnP checkbox. Click Save Settings
to continue.
4. Click Setup and then click Network Settings. Uncheck the Enable DHCP Server server checkbox. Click Save
Settings to continue.
5. Under Router Settings, enter an available IP address and the subnet mask of your network. Click Save Settings to
save your settings. Use this new IP address to access the configuration utility of the router in the future. Close the
browser and change your computer’s IP settings back to the original values as in Step 1.
Connect to Another Router

9D-Link DIR-130 User Manual
Section 2 - Installation
6. Disconnect the Ethernet cable from the router and reconnect your computer to your network.
7. Connect an Ethernet cable in one of the LAN ports of the router and connect it to your other router. Do not plug
anything into the Internet port of the D-Link router.
8. You may now use the other 7 LAN ports to connect other Ethernet devices and computers.

10D-Link DIR-130 User Manual
Section 3 - Configuration
Configuration
This section will show you how to configure your new D-Link router using the web-based configuration utility.
Web-based Configuration Utility
To access the configuration utility, open a web-browser
such as Internet Explorer and enter the IP address of
the router (192.168.0.1).
Enter admin as the User name field and enter the
password in the Password field. Leave the password
blank by default.
If you get a Page Cannot be Displayed error, please
refer to the Troubleshooting section for assistance.

11D-Link DIR-130 User Manual
Section 3 - Configuration
Setup Wizard
You may click Setup Wizard to quickly configure your router.
If you want to enter your settings without running the wizard, click
Manual Configure and skip to page 16.
Click Launch Internet Connection Setup Wizard to begin.

12D-Link DIR-130 User Manual
Section 3 - Configuration
Click Next to continue.
Create a new password and then click Next to continue.
Select your time zone from the drop-down menu and then click Next
to continue.
Select the type of Internet connection you use and then click Next
to continue.

13D-Link DIR-130 User Manual
Section 3 - Configuration
If you selected Dynamic, you may need to enter the MAC address of the
computer that was last connected directly to your modem. If you are currently
using that computer, click Clone Your PC’s MAC Address and then click
Next to continue.
The Host Name is optional but may be required by some ISPs.The default
host name is the device name of the Router and may be changed.
If you selected PPPoE, enter your PPPoE username and password. Click
Next to continue.
Select Static if your ISP assigned you the IP address, subnet mask, gateway,
and DNS server addresses.
Note: Make sure to remove your PPPoE software from your computer. The
software is no longer needed and will not work through a router.
If you selected PPTP, enter your PPTP username and password.Click Next
to continue.

14D-Link DIR-130 User Manual
Section 3 - Configuration
If you selected L2TP, enter your L2TP username and password. Click Next
to continue.
If you selected Static, enter your network settings supplied by your Internet
provider. Click Next to continue.
If you selected Big Pond, select your authentication server from the drop
down menu. You will also need to enter your Big Pond username and
password. Click Next to continue.

15D-Link DIR-130 User Manual
Section 3 - Configuration
Click Connect to save your settings. Once the router is finished rebooting,
click Continue. Please allow 1-2 minutes to connect.
Close your browser window and reopen it to test your Internet connection.
It may take a few tries to initially connect to the Internet.
If you selected Russian PPPoE, enter your PPPoE username and password.
Click Next to continue.
Select Static if your ISP assigned you the IP address, subnet mask, gateway,
and DNS server addresses.
Note: Make sure to remove your PPPoE software from your computer. The
software is no longer needed and will not work through a router.
If you selected Russian PPTP, enter your PPTP username and password.
Click Next to continue.