D-Link DIR-921 User manual

PureVPN Support
Solution of Your Problems
https://support.purevpn.com
Setup PureVPN with PPTP on D-Link DIR-921 router
Don’t worry if you can’t set up PureVPN on your device directly. You can now do it by
setting up the VPN on the router first. If you are using a D-Link DIR-912 router, here’s how
you can configure PureVPN on it using the PPTP protocol.
1To start set up VPN on D-Link router you first have to connect to it. For that you have to put in
your browser the following address: http://192.168.0.1 (If this doesn’t work, please consult your
router’s manual to find what is the Default Gateway Address). Enter your router’s username and
password and click ‘Log In’.
2Once logged in, select the ‘Internet’ option from the list of options at the top.
1 / 5

PureVPN Support
Solution of Your Problems
https://support.purevpn.com
3You will be re-directed to WAN Service Configuration, Under the ‘Internet Connection Type’ set
the Internet Connection to “PPTP(Username/Password)” from the drop-down menu.
2 / 5

PureVPN Support
Solution of Your Problems
https://support.purevpn.com
4Now enter the following information:
Address Mode: Dynamic IP
PPTP Server IP Address: (Enter the IP address of the VPN server you want to connect to in
this field. Click here on how to convert server address into IP address)
Username: (Enter the PureVPN usernamee. purevpn0sxxx)
Password: (Enter the PureVPN password)
Verify Password: (Enter the PureVPN password)
Reconnect Mode: Always On
NAT Disable: Uncheck
Once you have entered all the information, Click “Save Settings” button to activate the VPN
connection.
3 / 5

PureVPN Support
Solution of Your Problems
https://support.purevpn.com
4 / 5

PureVPN Support
Solution of Your Problems
https://support.purevpn.com
5PureVPN is successfully connected now on your D-Link DIR-921 4G LTE router. If the IP doesn’t
change, check to restart your router once or contact our 24/7 Live Chat support for help.
Powered by TCPDF (www.tcpdf.org)
5 / 5