D-Link DSL-G225 User manual

01
If you have a Fibre-to-the-Home service, connect the yellow Ethernet cable to the blue
WAN port on the back of the router. Connect the other end of the yellow cable to the
LAN port of the fibre device (ONT).
Skip to Step 4.
Fibre to home
02
03
If you have a DSL service, connect the splitter/filter to the port marked “OUT” on the
power supply. Out In
Power Supply
Splitter
Connect the grey telephone cable to the port marked “IN” on the power supply.
Connect the other end of the cable to the telephone wall socket.
Telephone Socket
Out
Power SupplyPower Supply
SplitterSplitter
Connect the red telephone cable to the red DSL port at the back of the router and the
other end into the red port of the splitter/filter.
You can connect a telephone to the green phone port of the splitter/filter.
04 Router
Power Supply
Power outlet
RouterRouter
Router
Splitter
SplitterSplitter
Connect the power connector of the power supply to the power socket at the back of
the router.
Plug the power supply into the wall outlet. Switch the wall outlet and the router on.
07
05
You can connect a device to your router using either Wi-Fi or the Ethernet cable.
Wi-Fi:
Use the default SSID and password (printed on the bottom of the router) to connect
your Wi-Fi enabled device to the router.
Ethernet cable:
Connect the yellow RJ-45 Ethernet cable to any yellow LAN port at the back of the
router and the other end into your PC LAN port.
06
DSL and FTTH
Launch an Internet browser (Google Chrome, Firefox, Internet Explorer, Safari, etc.) on
your connected device.
In the URL web address field, enter 10.0.0.2.
When prompted, enter admin for the user name and admin as the password.
The installation wizard will start automatically. Please follow the steps of the wizard to
finish the configuration of the router.
To connect your LTE/3G USB dongle (optional) for failover mode, simply connect the
dongle to the USB port at the back of your router.
08
To add additional USB storage (optional), simply insert the device into the USB
storage port at the back of the router
Installation Overview
IN OUT
Telephone Socket
Fibre to home
Yellow RJ-45 Cable
Your Fax Machine
Your Computer
Your Telephone
Router
Power Supply
Splitter
OR
A setup wizard utility is provided on the router webpage to assist with easy configuration. In the event of a
problem arising the help screens will suggest the appropriate course of action to resolve the issue.
If the wizard is unable to resolve the issue, please contact either the  DSL or Modem support line.
Please note that the operator will request the outcome of this wizard – Please make sure this has been done
and have resulting information available.
TELKOM LINE & ACCOUNT SUPPORT:
10210
Operating Hours:
06:00am - 21:00pm (Mon-Fri)
06:00am - 20:00pm (Weekends)
www.telkom.co.za
MODEM SUPPORT & SETUP:
012 741 2000
Operating hours:
08:00am - 21:00pm (Mon - Sun)
www.d-link.co.za
Product Support and Contact Information
If either of these lights are red please phone  for support
Yellow RJ-45 Cable
Router LAN Ports
Your Computer
Laptops Mobile Phones &
Tablets
Fibre to home
admin
User name:
URL: 10.0.0.2
Password: admin
For a list of supported USB
dongles:
http://telkom.d-link.co.za/products/
?pid=3745
USB Dongle
Storage
(not included)