D-Link DSL-G2452GE User manual

DUAL BAND WIRELESS AC1200 VDSL2/
ADSL2+ MODEM ROUTER WITH VOIP
DSL- G2452GE
QUICK
INSTALLATION
GUIDE

DSL-G2452GE 3
ENGLISH
CONTENTS OF
PACKAGING
CONTENTS
POWER ADAPTER
12 V 1.5 A
ETHERNET CABLE
CONNECT THE ROUTER TO YOUR PC DURING SET-UP
If any of these items are missing from your packaging contact
your reseller
RJ-11 PHONE CABLE
CONNECT THE ROUTER TO YOUR WALL PHONE JACK
DUAL BAND WIRELESS AC1200 VDSL2/ADSL2+
MODEM ROUTER WITH VOIP
DSL-G2452GE
SPLITTER

DS L- G2452G E
4
ENGLISH
PRODUCT SETUP
Step 1
Position your DSL-G2452GE near your PC and a telephone wall
jack which provides DSL service. Keep the modem router in an open
area for better wireless coverage.
PC
DSL-G2452GE Phone
Step 2
Connect one of the included phone cables from LINE port on the
microlter/splitter to a telephone outlet which provides VDSL/ADSL
sevice.
Connect the other included phone cable from the MODEM port on
the microlter/splitter to the DSL port of the modem router.
PC
DSL-G2452GE Phone
HARDWARE SETUP
Step 3
Connect the supplied power adapter to the modem router and a
power outlet, and press the power button. The device LEDs will light
up. Wait approximately one minute before going on to step 4.
DSL-G2452GEPower
PC
Step 4
Plug one end of the supplied Ethernet cable into the port labeled
1 on the back of the modem router, and the other end into the
Ethernet port on your computer.
If you are setting up the DSL-G2452GE using a laptop or mobile
device, connect it using the Wi-Fi network name and password
printed on the label attached to the back your router.
DSL-G2452GEPower
PC
SYSTEM REQUIREMENTS
• ADSL/VDSL Internet service
• Computer with:
• Microsoft Windows® 10/8/7/Vista/XP SP3 or Mac with OS X 10.7 or higher
• Internet Explorer 8, Edge 25, Firefox 20, Safari 4, or Chrome 17 or higher version with Java
installed and enabled
PC

DS L- G2452G E 5
ENGLISH
To congure your DSL-G2452GE, open a browser on the connected
computer. Go to "192.168.1.1" and follow the onscreen instructions.
If prompted, log in using the username and password printed on the
label attached to the back your router.
Log In
Admin Password:
CONFIGURE USING THE BUILT-IN WEB INTERFACE
SETUP USING THE BUILT-IN WEB INTERFACE
1. HOW DO I RESET MY DSL-G2452GE ROUTER TO THE FACTORY DEFAULT
SETTINGS?
- Ensure the router is powered on.
- Press the reset button on the side for more than 5 seconds until all the front LEDs turn on. The
router will reset to the factory defaults and begin rebooting.
Note: Resetting the router to the factory defaults will erase the current conguration settings.
To recongure your settings, log in to the router as outlined in question 1, then run the Setup Wizard.
2. HOW DO I ADD A NEW WIRELESS CLIENT OR PC IF I HAVE FORGOTTEN MY
WI-FI NAME (SSID) OR WI-FI PASSWORD?
- Use the web-based user interface (as described in question 1 above) to check or choose your
wireless settings.
- Make sure you write down these settings so that you can enter them for each wirelessly
connected PC. The back of this document features an area to record this important information.
- If your device supports WPS, you may press the WPS button on the side of the router for
approximately 5 seconds to begin the WPS pairing process. Refer to your wireless device's
documentation for information on how to pair a device to your DSL-G2452GE using WPS.
3. WHY CAN'T I GET AN INTERNET CONNECTION USING DSL?
- If you are replacing a DSL modem or combination DSL modem router, make sure to completely
disconnect and power off your existing equipment. Connect your DSL-G2452GE to the wall jack
which worked with your previous DSL modem.
- Verify that the BROADBAND LED is lit solid green. If it isn't, please contact your ISP to make
sure the service has been enabled/connected by your ISP.
- If the BROADBAND LED is lit solid green, but the INTERNET LED is lit solid red or off, or you
are having trouble with the Setup Wizard, make sure that the username and password provided
by your ISP are correct.
- If you are still having trouble, you may need to contact your ISP for additional Bring Your Own
Device (BYOD) conguration steps. Refer to the product manual, available at www.dlink.com/
support for additional conguration help.
TROUBLESHOOTING
CONFIGURATION

TECHNICAL SUPPORT
Australia:
Tel: [phone]
24/7 Technical Support
Web: http://www.dlink.com.au
E-mail: [email protected]
India:
Tel: [phone] or 1860-233-3999
Web: in.dlink.com
E-Mail: [email protected]
Singapore, Thailand, Indonesia,
Malaysia, Philippines, Vietnam:
Singapore - www.dlink.com.sg
Thailand - www.dlink.co.th
Indonesia - www.dlink.co.id
Malaysia - www.dlink.com.my
Philippines - www.dlink.com.ph
Vietnam - www.dlink.com.vn
Korea:
Tel : [phone]
Monday to Friday 9:30am to 6:30pm
Web : http://d-link.co.kr
E-mail : [e-mail]
New Zealand:
Tel: [phone]
24/7 Technical Support
Web: http://www.dlink.co.nz
E-mail: [email protected]
South Africa and Sub Sahara
Region:
Tel: [phone]
08600 DLINK (for South Africa only)
Monday to Friday 8:30am to 9:00pm South
Africa Time
Web: http://www.d-link.co.za
E-mail: [email protected]
D-Link Middle East
Dubai, U.A.E.
Tel: [phone]
Fax: [phone]
Technical Support: [phone]
General Inquiries: [email protected]
Tech Support: [email protected]
Egypt:
Technical Support Call Center: [phone]
General Inquiries: [email protected]
Tech Support : [email protected]
Kingdom of Saudi Arabia:
Technical Support:
[phone]
General Inquiries: [email protected]
Tech Support: [email protected]
Pakistan:
Technical Support: [phone], 34305069
General Inquiries: [email protected]
Tech Support: [email protected]
Morocco:
Phone ofce: [phone]
Email: [email protected]
Bahrain:
Technical Support: [phone]
Tech Support: [email protected]
Kuwait:
Tech Support: [email protected]
You can nd software updates and user documentation on the D-Link website.
Tech Support for customers in

GPL Code Statement
This D-Link product includes software code developed by third parties,
including software code subject to the GNU General Public License (“GPL”)
or GNU Lesser General Public License (“LGPL”). As applicable, the terms of
the GPL and LGPL, and information on obtaining access to the GPL code
and LGPL code used in this product, are available to view the full GPL Code
Statement at:
https://tsd.dlink.com.tw/GPL
The GPL code and LGPL code used in this product is distributed WITHOUT
ANY WARRANTY and is subject to the copyrights of one or more authors. For
details, see the GPL code and the LGPL code for this product and the terms of
the GPL and LGPL.
Written Oer for GPL and LGPL Source Code
Where such specific license terms entitle you to the source code of such
software, D-Link will provide upon written request via email and/or
traditional paper mail the applicable GPL and LGPLsource code les via CD-
ROM for a nominal cost to cover shipping and media charges as allowed
under the GPL and LGPL.
Please direct all inquiries to:
Email:
GPL[email protected]
Snail Mail:
Attn: GPLSOURCE REQUEST
D-Link Systems, Inc.
14420 Myford Road, Suite 100
Irvine, CA 92606

Ver. 1.00(ME)_130x183 2021/04/12 8500000863