D-Link i2eye DVC-1100 User manual

1
DVC-1100DVC-1100
DVC-1100DVC-1100
DVC-1100
Before You BeginBefore You Begin
Before You BeginBefore You Begin
Before You Begin
Check Your Package ContentsCheck Your Package Contents
Check Your Package ContentsCheck Your Package Contents
Check Your Package Contents
Standalone Wireless
Videoconferencing
Over Broadband IP
5V DC, 2A Power Adapter
i2eye DVC-1100 Wireless VideoPhone
Includes Detachable Antenna
Quick Installation Guide and Instruction Manual
Ethernet (CAT5 UTP/Straight Through) Cable
Standard Composite RCA Audio/Video Cable
Remote Control
Patent Pending
different voltage rating
will damage this product
and void the warranty.
Using a power
supply with a
1.1.
1.1.
1. Using the D-Link i2eyeTM DVC-1100 Wireless VideoPhone requires a connection to
the Internet over a Broadband connection (e.g., a Cable modem or a DSL modem
with a router).
2. Attaching a telephone to the DVC-1100 is optional, but highly recommended for
optimal sound quality.
3. If you are sharing the Internet connection with another device (such as a PC) you
will also need a wireless broadband router or wireless residential gateway.
Wireless
VideoPhone
All manuals and user guides at all-guides.com
all-guides.com

2
Connecting the DVC-1100 WirelessConnecting the DVC-1100 Wireless
Connecting the DVC-1100 WirelessConnecting the DVC-1100 Wireless
Connecting the DVC-1100 Wireless
VideoPhoneVideoPhone
VideoPhoneVideoPhone
VideoPhone
A. Place the DVC-1100 Wireless VideoPhone directly on top of a television.
To obtain the best viewing experience, the VideoPhone should be 5 to 10
feet away from the intended subject.
B. Attach the supplied audio/video cable to the DVC-1100 and to the
matching audio/video jacks on the television or VCR.
C. To connect to a network using an Ethernet cable, attach the supplied
Ethernet cable to the DVC-1100 and to the Cable or DSL modem or
Ethernet network device (hub, switch or router).
D. To connect using a wireless network, attach the supplied antenna to the
DVC-1100.
E. Attaching a telephone is optional, but recommended for optimal sound
quality. Attach a standard telephone cable to the telephone and directly
to the DVC-1100. Do NOT attach the telephone to a wall telephone
outlet.
F. Plug the supplied AC power cable into an AC outlet and then into the
DVC-1100.
G. Attaching an external microphone is optional, but recommended for
optimal sound for a group videoconference.
FD
B
E
GC
i2eyei2eye
i2eyei2eye
i2eye
All manuals and user guides at all-guides.com

3
Sharing a Broadband ConnectionSharing a Broadband Connection
Sharing a Broadband ConnectionSharing a Broadband Connection
Sharing a Broadband Connection
With the DVC-1100With the DVC-1100
With the DVC-1100With the DVC-1100
With the DVC-1100
When you have completed the steps in this Quick
Installation Guide, your connected VideoPhone should
look similar to this:
Before using your D-Link DVC-1100 Wireless VideoPhone, you will want to
understand the network requirements for this device. If you are using a
residential gateway or router and sharing the broadband connection with
your DVC-1100, please read the section starting on Page 50 of the manual
included with the DVC-1100.
All manuals and user guides at all-guides.com

4
Full-Screen /
Picture-in-Picture
Self-View /
Remote View
Using the Remote ControlUsing the Remote Control
Using the Remote ControlUsing the Remote Control
Using the Remote Control
The DVC-1100 Wireless VideoPhone needs to be configured before use.
There is an easy to use Setup Wizard built into the DVC-1100 to accomplish
the configuration.
You will use the Setup Wizard along with the remote control included with the
DVC-1100. The remote control is used to enter numbers, characters and to
make selections from a keyboard that is displayed on the TV screen.
Mute Video
Mute Audio
Cancel
ENTER key
Number sign
Adjust Contrast
Speakerphone
Mode
The * (asterisk--sometimes
called a “star” key) is used
to enter a “.” (period also
called a “dot”.)
When entering alphanumeric
information the left arrow
key performs a backspace,
deleting the character to the
left of the on-screen cursor.
When a numeric input
is required, (e.g., a
telephone number or
IP address) enter it
directly by pressing
the number keys.
Use the arrow keys
to move the position
of the on-screen
cursor.
All manuals and user guides at all-guides.com

5
UU
UU
Usinsin
sinsin
sing a Tg a T
g a Tg a T
g a Telepheleph
elepheleph
elephonon
onon
one with the with th
e with the with th
e with the DVC-1100e DVC-1100
e DVC-1100e DVC-1100
e DVC-1100
Using the On-Screen KeyboardUsing the On-Screen Keyboard
Using the On-Screen KeyboardUsing the On-Screen Keyboard
Using the On-Screen Keyboard
Whenever you need to enter numbers or letters into a Setup screen, press
ENTER on the remote control and the on-screen keyboard appears:
After entering characters or numbers, and to execute a selection, press
ENTER on the remote. Use the arrow keys to move the cursor on the screen to
the desired character. The cursor can wrap around on the right and left side of
the keyboard to assist you in “typing” a character quickly.
To remove the keyboard from the screen, highlight the OK key and press ENTER
on the remote. Also, the CANCEL key on the remote removes the keyboard from
the screen, leaving what you typed on the screen.
You cannot use a telephone plugged into the i2eye VideoPhone
to place regular phone calls as the phone would not be con-
nected to a standard phone line. Only VideoPhone calls over
the Internet can be made with a telephone connected to the
DVC-1100.
Shift Key for
UPPER, lower
case or shift
lock
In addition to providing optimal sound quality, a telephone:
•Can be used to start a videoconference similar to the way you
would place a regular telephone call.
•Lets you receive a videconference call similar to the way you
would receive a regular telephone call.
All manuals and user guides at all-guides.com

6
The Setup WizardThe Setup Wizard
The Setup WizardThe Setup Wizard
The Setup Wizard
Personal Information ScreenPersonal Information Screen
Personal Information ScreenPersonal Information Screen
Personal Information Screen
Enter your name and phone
number (consisting of a Country
code, Area code and Phone
number.)
The phone number you enter
is one you create for family,
friends and others to call you.
You can use your regular phone
number or make up a new one.
The Caller ID function displays
this name at the other end of the
connection. Your number willl
not be visible to anyone else.
Click Next
Click Next
Press the power switch on the
back of the DVC-1100 and the
Welcome Screen appears.
Note: The Country code for the United States and Canada is “1”. See
Page 74 of the DVC-1100 manual for Country codes of other countries.
All manuals and user guides at all-guides.com
all-guides.com

7
The Setup Wizard (continued)The Setup Wizard (continued)
The Setup Wizard (continued)The Setup Wizard (continued)
The Setup Wizard (continued)
Connect to a Wireless NetworkConnect to a Wireless Network
Connect to a Wireless NetworkConnect to a Wireless Network
Connect to a Wireless Network
ConfiConfi
ConfiConfi
Configurgur
gurgur
gure Ye Y
e Ye Y
e Your Wirour Wir
our Wirour Wir
our Wireless Settineless Settin
eless Settineless Settin
eless Settingsgs
gsgs
gs
Note: The number next to
the SSID indicates the sig-
nal strength of the available
access point on the wireless
network.
Highlight the SSID of the de-
vice you wish to connect to
and press Enter on the re-
mote control.
(Only if using DVC-1100 in wireless mode. Wireless mode is enabled by default.)
Press Enter to choose the
Authentication Type be-
tween Open System and
Shared Key.
Press Enter to choose the
appropriate WEP Type be-
tween 64, 128 or 256 bits.
Press Enter to select the
Key ID you wish to use.
Enter the your encryption
keys here.
Note: If you have any questions regarding using wireless encryption
on the DVC-1100, please refer to DVC-1100 manual on page 13.
Click OK
Note: The wireless settings must match your existing wireless network
settings.
All manuals and user guides at all-guides.com

8
Click Next
ConfiConfi
ConfiConfi
Configurgur
gurgur
gure Ye Y
e Ye Y
e Your Wirour Wir
our Wirour Wir
our Wireless Settineless Settin
eless Settineless Settin
eless Settingsgs
gsgs
gs
The Setup Wizard (continued)The Setup Wizard (continued)
The Setup Wizard (continued)The Setup Wizard (continued)
The Setup Wizard (continued)
Site survey box highlights the
SSID you have already chosen.
Once connected, the status
message should say “Wireless
Connection OK”
Connect to an Ethernet Network Using a CableConnect to an Ethernet Network Using a Cable
Connect to an Ethernet Network Using a CableConnect to an Ethernet Network Using a Cable
Connect to an Ethernet Network Using a Cable
Uncheck the “Enable Wire-
less” checkbox.
Click Next
(Skip this step if you are connecting to a wireless network.)
All manuals and user guides at all-guides.com

9
The Setup Wizard (continued)The Setup Wizard (continued)
The Setup Wizard (continued)The Setup Wizard (continued)
The Setup Wizard (continued)
Click Next
Network Address ScreenNetwork Address Screen
Network Address ScreenNetwork Address Screen
Network Address Screen
Click Next
Choose one of the three available options that best suits your environment. If
you are not sure which option will work with your Internet connection, please
contact your ISP or network administrator for support.
DHCP is used when connect-
ing directly to a broadband mo-
dem that offers dynamic IP ad-
dressing or when behind a
router/DHCP server that offers
static DHCP.
Fixed IP is used when connect-
ing to a broadband connection
that offers static IP addressing
or when behind a router that is
not configured for static DHCP.
This choice requires the input
of specific IP address informa-
tion.
All manuals and user guides at all-guides.com

10
The Setup Wizard (continued)The Setup Wizard (continued)
The Setup Wizard (continued)The Setup Wizard (continued)
The Setup Wizard (continued)
Network Address Screen (continued)Network Address Screen (continued)
Network Address Screen (continued)Network Address Screen (continued)
Network Address Screen (continued)
If you selected Fixed IP in the
Network Address screen,
you will see the screen for
setting DNS server
addresses. Only the primary
DNS is required, although
entering both a primary and
secondary is recommended.
To configure a router to work with the DVC-1100, please see the
section starting on Page 50 of the DVC-1100 manual.
Click Next
DNS ScreenDNS Screen
DNS ScreenDNS Screen
DNS Screen
Click Next
PPPoE is used when connect-
ing directly to a DSL modem
that offers a PPPoE connec-
tion. Your user name and
password for the PPPoE ac-
count must be entered in the
provided fields.
All manuals and user guides at all-guides.com

11
The Setup Wizard (continued)The Setup Wizard (continued)
The Setup Wizard (continued)The Setup Wizard (continued)
The Setup Wizard (continued)
YY
YY
Your Setup is Complete!our Setup is Complete!
our Setup is Complete!our Setup is Complete!
our Setup is Complete!
Click Yes
System RestartSystem Restart
System RestartSystem Restart
System Restart
Select the type of broadband
Internet connection you use.
Click Next
Network Speed ScreenNetwork Speed Screen
Network Speed ScreenNetwork Speed Screen
Network Speed Screen
All manuals and user guides at all-guides.com
all-guides.com

12
NOTESNOTES
NOTESNOTES
NOTES
All manuals and user guides at all-guides.com

13
Technical SupportTechnical Support
Technical SupportTechnical Support
Technical Support
You can find software updates and user documentation on the D-Link website.
D-Link provides free technical support for customers within the United States and
within Canada for the duration of the warranty period on this product.
U.S. and Canadian customers can contact D-Link Technical Support through our
website, or by phone.
Tech Support for customers within the United States:
D-Link Technical Support over the Telephone:
[phone]
24 hours a day, seven days a week.
D-Link Technical Support over the Internet:
http://support.dlink.com
email:[email protected]
Tech Support for customers within Canada:
D-Link Technical Support over the Telephone:
[phone]
Monday to Friday 8:30am to 9:00pm EST
D-Link Technical Support over the Internet:
http://support.dlink.ca
email:[email protected]
All manuals and user guides at all-guides.com