D-Link VisualStream DSB-C110 User manual

D-Link VisualStreamTM
100K Pixel USB PC Camera
DSB-C110DSB-C110
DSB-C110DSB-C110
DSB-C110
This product can be used with:This product can be used with:
This product can be used with:This product can be used with:
This product can be used with:
Windows XP, Me, 2000,Windows XP, Me, 2000,
Windows XP, Me, 2000,Windows XP, Me, 2000,
Windows XP, Me, 2000,
98 Second Edition98 Second Edition
98 Second Edition98 Second Edition
98 Second Edition
Check Your Package Contents
These are the items included with your purchase:
If any of the below items are missing, please contact your reseller.
Before You Begin
You must have at least the following:
•Windows XP/Me/2000/98Second Edition
•One available USB Port
•CD-ROM Drive
Run the Driver CD before you install the PC Camera.The
Driver CD contains an installation program that simplifies your
installation process.
•DSB-C110 USB PC Camera
•CD-ROM
(containing Drivers, PDF Installation Guide,
PDF Manual, and Warranty)

Click Install D-Link CIF
Webcam
If the Autorun screen does not automatically start, click on Start > Run,
enter “D:\Autorun.exe” and click OK. “D” represents the letter of your CD-
ROM drive. Replace it if your CD-ROM drive is a different letter.
Insert the D-Link CD-ROM
Into Your Computer
Turn on your computer and Insert the D-Link VisualStreamTM DSB-C110 Driver CD in
the CD-ROM drive.
Do NOT install the PC Camera into your PC before
installing the driver software on the D-Link CD!
Choose Install D-Link
CIF WebCam For
Windows for your
Operating System

Click Next
Click Finish
You may see this screen
during the installation.
Please select the
appropriate power
frequency corresponding
to your geographic area.

Connect the Camera To Your
Windows-based Computer
With your computer ON, Connect the PC Camera to an available USB port on your USB
host adapter or USB hub. (You may also use a USB extension cable for easy access)
Windows XP Users
Follow these steps to
complete installation in
Windows XP.
Click Next
Click Continue
Anyway

Click Finish
Windows 2000 & Me Users
The DSB-C110 driver installation will proceed automatically for Windows 2000
& Me users.

Click Next
Click Next
Click Next
Windows 98SE Users
Click Next

Click Finish
The Installation is Complete!
Once properly installed, you are ready to start immediately capturing images and
creating video with the DSB-C110.
Please refer to the DSB-C110 Manual on the CD included with this product for
information on how to install and use the ArcSoft VideoImpression and ArcSoft
PhotoImpression software.
You may see this screen
during the installation.
Please select the
appropriate power
frequency corresponding
to your geographic area.

TechnicalSupport
You can find the most recent software and user
documentation on the D-Link website.
D-Link provides free technical support for customers
within the United States for the duration of the warranty
period on this product.
U.S. customers can contact D-Link technical support
through our web site or by phone.
D-Link Technical Support over the Telephone:
(877) 45D-LINK
[phone]
24 hours a day, seven days a week
D-Link Technical Support over the Internet:
http://support.dlink.com
email: [email protected]
©2002 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their
respective holders. Software and specifications subject to change without notice. DSB-C110.09302002