D-Link VisualStream DSB-C310 User manual

D-Link VisualStreamTM
300K Pixel USB PC Camera
DSB-C310DSB-C310
DSB-C310DSB-C310
DSB-C310
This product can be used with:This product can be used with:
This product can be used with:This product can be used with:
This product can be used with:
Windows XP, Me, 2000, 98SEWindows XP, Me, 2000, 98SE
Windows XP, Me, 2000, 98SEWindows XP, Me, 2000, 98SE
Windows XP, Me, 2000, 98SE
Check Your Package Contents
These are the items included with your purchase:
If any of the below items are missing, please contact your reseller.
Before You Begin
You must have at least the following:
•Windows XP/Me/2000/98SE
•One available USB Port
•CD-ROM Drive
•DSB-C310 USB PC Camera
•CD-ROM
(containing Drivers, PDF Installation Guide,
PDF Manual, and Warranty)
Run the Driver CD before you install the PC Camera.The
Driver CD contains an installation program that simplifies your
installation process.

Click Install D-Link VGA
Webcam Drivers
If the Autorun screen does not automatically start, click on Start > Run,
enter “D:\Autorun.exe” and click OK. “D” represents the letter of your CD-
ROM drive. Replace it if your CD-ROM drive is a different letter.
Insert the D-Link CD-ROM
Into Your Computer
Turn on your computer and Insert the D-Link VisualStreamTM DSB-C310 Driver CD in
the CD-ROM drive.
Do NOT install the PC Camera into your PC before
installing the driver software on the D-Link CD!
Choose Install Drivers
for your Operating
System

Click Next
Click Finish

Connect the Camera To Your
Windows-based Computer
With your computer ON, Connect the PC Camera to an available USB port on your USB
host adapter or USB hub. (You may also use a USB extension cable for easy access)
Windows XP Users
Follow these steps to
complete installation .
Click Next
Accept Windows choice of
drivers (highlighted)
Click Next

Click Finish
Click Continue Anyway
To verify installation,
right-click on My
Computer>Hardware>Device
Manager and the VGA
Camera will show up in
2 places: Imaging
Device and under USB
Controller

Windows 2000 & ME Users
The DSB-C310 driver installation will proceed automatically for Windows 2000 &
Me users.
Click Next
Click Next
Click Next
Windows 98SE Users
Click Next

Click Finish
This screen
may appear
during
installation.
Click Yes
The Installation is Complete!
Once properly installed, you are ready to start immediately capturing images and
creating video with the DSB-C310.
Please refer to the DSB-C310 Manual on the CD included with this product for
information on how to install and use the ArcSoft VideoImpression and ArcSoft
PhotoImpression software.

TechnicalSupport
You can find the most recent software and user
documentation on the D-Link website.
D-Link provides free technical support for customers
within the United States for the duration of the warranty
period on this product.
U.S. customers can contact D-Link technical support
through our web site or by phone.
D-Link Technical Support over the Telephone:
(877) 45D-LINK
[phone]
24 hours a day, seven days a week
D-Link Technical Support over the Internet:
http://support.dlink.com
email: [email protected]
©2002 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their
respective holders. Software and specifications subject to change without notice. DSB-C310.10072002