Da-Lite Tensioned Advantage Deluxe Electrol User manual

HDTV FORMAT DIMENSIONS
Viewing Area Nominal Diagonal Overall Length of Case Approx. Ship. Wt.
H x W Cm In. Cm In. Cm Lbs. Kg
45" x 80" 114 x 203 92" 234 102-3/4" 261 125 56.7
52" x 92" 132 x 234 106" 269 115-1/4" 293 140 63.5
54" x 96" 137 x 244 110" 279 119-3/4" 304 145 65.8
58" x 104" 147 x 264 119" 302 128-1/4" 326 150 68.0
65" x 116" 165 x 295 133" 338 141-1/4" 359 163 73.9
78" x 139" 198 x 353 159" 404 166-1/4" 422 188 85.3
SPECIFICATION DATA
TENSIONED ADVANTAGE
DELUXE ELECTROL
®
Automatic Electric Projection Screen
VIDEO FORMAT DIMENSIONS
Viewing Area Nominal Diagonal Overall Length of Case Approx. Ship. Wt.
H x W Cm In. Cm In. Cm Lbs. Kg
43" x 57" 109 x 145 72" 183 79-1/4" 201 102 46.3
50" x 67" 127 x 170 84" 213 90-1/4" 229 114 51.7
60" x 80" 152 x 203 100" 254 104-1/4" 265 125 56.7
69" x 92" 175 x 234 120" 305 118-1/4" 300 148 67.1
87" x 116" 221 x 295 150" 381 145-1/4" 369 170 77.1
108" x 144" 274 x 366 180" 457 170-1/4" 432 189 85.7
120" x 160" 305 x 406 200" 508 187-1/4" 476 203 92.1
S UGGESTED SPECIFICATIONS: projection screen(s), (H) x (W), size. The
Tensioned Advantage Deluxe screen shall have two motors, one to operate door and one to operate screen. Door motor electrically
operated 120 volt (60 Hz) 1.2 amp. Shall have specially designed motor mounted inside the roller, to be three wire with ground, quick
reversal type, oiled for life, with automatic thermal overload cutout, integral gears, capacitor and an electric brake to prevent coasting.
To have pre-set but adjustable limit switches to automatically stop fabric door in the ”up“ and ”down“ positions. The roller to be of rigid
aluminum, 1-1/2" in diameter. Screen motor is electrically operated 120 volt (60 Hz) 1.4 amp. Shall have specially designed motor
mounted inside the roller with a noise silencer to be three wire quick reversal type, oiled for life, with automatic thermal overload
cutout, integral gears, capacitor and an electric brake to prevent coasting. To have pre-set but adjustable limit switches to automatically
stop picture surface in the ”up“ and ”down“ positions. The roller to be of rigid metal, 3-3/16" in diameter. Screen fabric to be seamless,
flame retardant and mildew resistant vinyl, with Da-Mat, High Contrast Da-Mat, Audio Vision, High Contrast Audio Vision, Da-Tex (Rear),
Dual Vision, Cinema Vision, High Contrast Cinema Vision, High Contrast Cinema Perf or Pearlescent surface with black masking borders
standard. Each side of the fabric to have tab guide cable system to maintain even lateral tension and hold surface flat. Custom slat bar
with added weight maintains vertical tension on the screen surface. Case shall be an aluminum extrusion. Bottom of case to be self-
trimming with a built-in flange around the bottom of the case. Case to be white. Steel brackets bolted to the ends of case for ceiling
mounting. A section of the bottom of the case shall be an aluminum door equipped with hinges so that it opens and closes
automatically with the lowering and raising of the picture surface. The balance of the bottom of the case shall be a second hinged
aluminum door with manual opening to provide access. Hinges shall be mounted in a concealed way.
Junction box shall be integrated
into the housing making it possible to install the housing and wire to the building’s electrical system during construction. The junction
box shall contain a five prong connector that is mounted in the housing for easy plug-in connection to the motorized fabric and roller
assembly. The motorized fabric and roller assembly to be installed in the case at the factory or at a later time at the job site.
To be
complete with three position control switch and cover plate. Suitable for use in environmental air space in accordance with section
300-22 (c) of the National Electric Code, and sections 2-128, 12-010 (3) and 12-100 of the Canadian Electrical Code, part 1, CSA C22.1.
Screen to be listed by Underwriters’ Laboratories.
All viewing surfaces will be seamless.
All viewing surfaces are standard with black backing except Da-Tex and Dual Vision.
Audio Vision, High Contrast Audio Vision and High Contrast Cinema Perf available in sizes up to 87" x 116" in Video Format and 78" x 139" in HDTV
Format.
All screens standard with 12" black drop at top.
Extra drop may alter case dimensions. Contact Da-Lite for details.
Overall case length dimensions ±1/4".
Detail dimensional drawings, wiring diagrams and installation instructions
available upon request.
Specifications subject to change without notice.
Letterbox formats and custom sizes available upon request.
DA-LITE SCREEN COMPANY, INC.
3100 North Detroit Street
Post Office Box 137
Warsaw, Indiana 46581-0137
Phone: [phone]
800-622-3737
Fax: [phone]
www.da-lite.com
e-mail: [email protected]
SQUARE FORMAT DIMENSIONS
Viewing Area Overall Length of Case Approx. Ship. Wt.
H x W Cm In. Cm Lbs. Kg
50" x 50" 127 x 127 73-1/4" 186 93 42.2
60" x 60" 152 x 152 84-1/4" 214 104 47.2
70" x 70" 178 x 178 95-3/4" 243 116 52.6
84" x 84" 213 x 213 112-1/4" 288 125 56.7
6' x 8' 183 x 244 122-1/4" 311 140 63.5
8' x 8' 244 x 244 125-3/4" 319 148 67.1
7' x 9' 213 x 274 136-1/4" 346 155 70.3
9' x 9' 274 x 274 134-3/4" 342 159 72.1
8' x 10' 244 x 305 149-3/4" 380 165 74.8
10' x 10' 305 x 305 146-3/4" 373 168 76.2
9' x 12' 274 x 366 170-3/4" 434 189 85.7
C

WHEN ORDERING, MARK APPROPRIATE SELECTIONS:
Select size from charts on the other side.
Select viewing surface:
❏Da-Mat ❏High Contrast Da-Mat
❏Pearlescent ❏Cinema Vision
❏Audio Vision ❏Da-Tex (Rear)
❏Dual Vision ❏High Contrast Cinema Vision
❏High Contrast Audio Vision❏High Contrast Cinema Perf
Optional Accessories:
❏Single motor Low Voltage Control(LVC) - external.
❏Single motor Low Voltage Control(LVC) - built-in. Electrical
connections will be on right end of screen case on units
with built-in LVCs.
❏Wireless Remote Control for LVC.
❏Radio Frequency Remote
❏Infrared Remote
❏Key Locking Cover Plate for 120 V Switch or LVC.
❏Key Operated Switch for 120 V only (NOTE: Cannot be used
with LVC).
❏220/240 Volt (50 Hz) motor.
❏Video Projector Interface - 12V or 5V.
❏SCB-100 RS-232 Serial Control Board - external.
❏NET-100 Ethernet-Serial Adapter
❏SCB-100 RS-232 Serial Control Board - built-in. Electrical
connections will be on right end of screen case on units
with built-in SCB-100.
❏NET-100 Ethernet-Serial Adapter
❏SCB-200 RS-232 Serial Control Board - built-in. Electrical
connections will be on right end of screen case on units
with built-in SCB-200.
❏NET-200 Ethernet-Serial Adapter
❏WC-200 Wall Controller
❏IR-200 Infrared Remote
Rev. 2/06
SUGGESTED CEILING INSTALLATION
TENSIONED ADVANTAGE DELUXE ELECTROL®
DOOR ROLLER SCREEN ROLLER
SCREEN DOOR
ACCESS DOOR
AUDIENCE
SIDE
SELF-TRIMMING
FLANGE
CASE LENGTH
VARIABLE POSITION
MOUNTING BRACKET
7-1/4"
7-5/8"
MOTOR END
9-1/4"
3/8" THREADED ROD
(NOT INCLUDED)
ATTACHED TO
MOUNTING BRACKET
FINISHED CEILING
SELF-TRIMMING FLANGE
7-1/4"
8-3/4"
ELECTRICAL
JUNCTION BOX
3-3/8" 5-3/8"
7-1/4"
7-5/8"
Project:
Architect:
Phone:
Contractor:
Phone:
Supervisor:
Phone:
Supplier:
Date:
Revised: