Daedong CK2610CHSE User manual

FOREWORD
 Make sure to read this manual carefully and keep it handy for future reference.
 When leasing or transferring this tractor, deliver this manual together with the tractor.
 
< NOTE >
CK2610CHSE / CK3510(H,C,CH)SE /
CK4010(H,C,CH)SE ownership, where serious work is made fun again!
                
Daedong Industrial Co.,LTD over the years since 1947. The CK2610CHSE / CK3510(H,C,CH)SE /
CK4010(H,C,CH)SE -
KIOTI Engineering Department.

owner's familiarize themselves with the KIOTI CK2610CHSE / CK3510(H,C,CH)SE / CK4010(H,C,CH)SE,
it is the policy of KIOTI
safety, operation and maintenance. If the information you seek is not found in this manual, your KIOTI trac-

Please feel free to contact DAEDONG IND. CO.,LTD
TC220-영문-수출향(법인향)-OM-00.indd 1 2020-02-20 오후 2:51:50

This manual was compiled in compliance with the ISO 3600, standards and the instructions contained here comply with

outside the European Community, local laws will prevail.
Main protections on the tractors discussed in this manual.
ISO 3600 EU STANDARDS
DESCRIPTION NON CABIN CABIN
1. ROPS (Protection against overturning) Yes Yes
  No Yes
 
protection against hazardous chemicals
No
(CategoryⅠ)
No
(CategoryⅠ)
TC220-영문-수출향(법인향)-OM-00.indd 2 2020-02-20 오후 2:51:51

FOR SAFE OPERATION .................................
BEFORE OPERATION ....................................
SPECIFICATIONS............................................
FUNCTION DESCRIPTION AND OPERATING TIPS....
OPERATION ....................................................
3-POINT HITCH IMPLEMENT AND LOADER OPERATION ..
MAINTENANCE...............................................
STORAGE AND DISPOSAL............................
TROUBLESHOOTING.....................................
INDEX...............................................................
TABLE OF CONTENTS
SECTION
1
2
3
4
5
6
7
8
9
10
TC220-영문-수출향(법인향)-OM-00.indd 3 2020-02-20 오후 2:51:51

TABLE OF CONTENTS
FOR SAFE OPERATION .....................................1-1
PRECAUTIONS BEFORE OPERATION .................. 1-2
............................................. 1-
............................................... 1-6
PRECAUTIONS DURING OPERATION ................... 1-9
 ................................. 1-13
WHEN PARKING THE TRACTOR ................................ 1-1
WHEN OPERATING THE P.T.O .................................... 1-1
 ............................ 1-17
SAFETY PRECAUTIONS DURING SERVICING ... 1-17
SAFETY PRECAUTIONS WHEN USING THE
LOADER .............................................................. 1-21
IMPLEMENTS AND ATTACHMENTS .................... 1-24
CLEANING THE TRACTOR................................... 1-26
SAFETY DECAL MAINTENANCE ......................... 1-27
 ................................... 7
DESCRIPTION .............................................................. 9
 ................... 1-3
BEFORE OPERATION ........................................2-1
VEHICLE IDENTIFICATION NUMBER..................... 2-2
 .................................. 
............................................. 
............................................. 3
ESSENTIAL REPLACEMENT PARTS ..................... 2-4
 .......................................................... 4
 .......................................................................... 4
......................................... 
OTHER COMPONENTS ................................................. 
SPECIFICATIONS................................................3-1
SPECIFICATIONS..................................................... 3-2
EXTERNAL DIMENSIONS ....................................... 3-2
MAJOR SPECIFICATIONS....................................... 3-4
NOISE LEVELS AS PERCEIVED BY THE OP-
ERATOR............................................................... 3-10
VIBRATION LEVELS OF THE TRACTOR EXPO-
SITION TO VIBRATIONS..................................... 3-11
TC220-영문-수출향(법인향)-OM-00.indd 4 2020-02-20 오후 2:51:51

TABLE OF CONTENTS
PTO SPEED .................................................................. 4-1
................................................................ 4-1
............. 4-16
 .............................. 4-17
.................................................... 4-17
 
CK4010 ONLY)........................................................... 4-17

CK4010 ONLY)........................................................... 4-18
PTO INDICATOR........................................................... 0
 ................ 0
 ......................... 1
............................. 
PREHEAT INDICATOR.................................................. 
 ........................ 
 ............................. 3
ERROR INDICATOR ..................................................... 4
CONTROLS ............................................................ 4-25
...................................................... 7
.................................................. 7
 .............................................. 8
DRIVING SPEED TABLE........................................ 3-12
IMPLEMENT LIMITATIONS.................................... 3-14
STANDARD IMPLEMENT DIMENSIONS............... 3-14
FUNCTION DESCRIPTION AND OPERATING
TIPS...................................................................4-1
EXTERIOR VIEW...................................................... 4-3
SWITCHES ............................................................... 4-5
 .................................................. 4-
KEY SWITCH .................................................................. 4-7
 ................................................ 4-8
..................... 4-10
................ 4-10
 ..............................................4-11
PTO SELECTION SWITCH........................................... 4-1
................................... 4-1
INSTRUMENT CLUSTER....................................... 4-14
 ......................... 4-14
...................................... 4-1
TC220-영문-수출향(법인향)-OM-00.indd 5 2020-02-20 오후 2:51:51

TABLE OF CONTENTS
.............................. 8
 ........................................................... 9
.............................................................. 9
......................................................... 4-30
ACCELERATOR PEDAL ............................................... 4-30
............................................ 4-31
............. 4-31
.................................... 4-3
...................................... 4-33
..................................................... 4-34
 ...................................... 4-3
  
 ......................................................................... 4-36
 ........................................................ 4-36
............................................. 4-37
CABIN SYSTEM .................................................... 4-38
..................................................... 4-38
.................................................... 4-39
ENTRANCE .................................................................. 4-40
EMERGENCY HAMMER............... 4-40
 ............................................. 4-41
REAR WINDOW ............................................................ 4-41
WORKING LIGHT.......................................................... 4-4
WIPER .......................................................................... 4-4
............................... 4-43
ANTENNA...................................................................... 4-44
INDOOR LAMP.............................................................. 4-44
 ...................................... 4-4
................................................................... 4-46
 .......... 4-46
......................... 4-47
HEATER AND AIR CONDITIONER ............................... 4-49
7-PIN SOCKET (OPTIONAL) ........................................ 3
TIRES, WHEELS AND BALLAST .......................... 4-54
 .............................................. 
TREAD........................................................................... 6
............................. 8
ADDITIONAL WEIGHT (OPTIONAL) ............................ 9
HOW TO DRIVE...................................................5-1
PRE-OPERATION CHECK ....................................... 5-2
INITIAL OPERATION................................................ 5-2
TC220-영문-수출향(법인향)-OM-00.indd 6 2020-02-20 오후 2:51:51

TABLE OF CONTENTS
3-POINT HITCH IMPLEMENT AND LOADER
OPERATION......................................................6-1
REMOVAL AND INSTALLATION OF 3-POINT
HITCH IMPLEMENT (INCLUDING CONNEC-
TION OF UNIVERSAL JOINT) .............................. 6-2
OPERATION FOR 3-POINT HITCH IMPLEMENT
MOUNTING COMPONENTS ................................. 6-5
 ......................................... 6-
 ......................................... 6-6
 ..................................... 6-6
 ................................. 6-6
 ............................................. 6-7
.......................................... 6-8
...................... 6-9
............................................... 6-9
HANDLING LOADER ............................................. 6-12
.......... 6-13
 .................................................... 6-14
 ........................................................ 6-1
 ......................................................... 6-18
OPERATING THE ENGINE ...................................... 5-3
STARTING ENGINE ........................................................ 3
STOPPING ENGINE ....................................................... 7
 ................................................................. 8
 ............................................................ 9
OPERATING THE TRACTOR................................. 5-10
 ............................................................ 0
 .................................................. 4
........ 
PARKING....................................................................... 6
 ...................................................................... 7
 .................................................... 7

............................................................. 8
 ...... 8

....................................................................... 9
 .. 0
3-POINT HITCH CONTROL POSITION CONTROL ..... 
 ............................................... 4
TC220-영문-수출향(법인향)-OM-00.indd 7 2020-02-20 오후 2:51:51

TABLE OF CONTENTS
MAINTENANCE...................................................7-1
MAINTENANCE CHECK LIST ........................................ 7-3
DAILY CHECK ITEM ....................................................... 7-3
............................. 7-4
.................................................................. 7-8
MAINTENANCE CODE ................................................. 7-10
HOW TO DISCONNECT THE HOOD (A)...................... 7-10
 ............................ 7-10
...........7-11
 ............................ 7-1
................................ 7-13
CLEANING RADIATOR GRILL AND SCREEN (G) ....... 7-14
 ......... 7-1
.... 7-1
CHECKING HEAD LIGHT, HAZARD LIGHT ETC. (J)... 7-1
....................... 7-1
 ... 7-1
 .... 7-18
..................... 7-19
 .................................. 0
 ........................... 
 ............. 3
 ................................ 3
........................................................... 4

(T)............................................................................... 
 ........................................ 6
.......................... 7
................................................................ 7
CHECKING INTAKE AIR LINE (X) ................................ 7-30
 ............................................... 7-30
CHECKING RADIATOR HOSE AND CLAMP (Z).......... 7-30
POWER STEERING LINE (AA)..................................... 7-31
................ 7-31
 ........ 7-3
 .................... 7-3
 ...................................... 7-33
........... 7-34
-
ANT (AJ) .................................................................... 7-36
 ............................................................... 7-38
 .................................. 7-38
... 7-40
TC220-영문-수출향(법인향)-OM-00.indd 8 2020-02-20 오후 2:51:51

TABLE OF CONTENTS
CHECKING AND REPLACING WIPER(AM) ................. 7-40
.......................................................... 7-4
........................................................... 7-4
............................................... 7-46
STORAGE AND DISPOSAL................................8-1
TRACTOR STORAGE .............................................. 8-2
DAILY STORAGE ............................................................ 8-
LONG-TERM STORAGE................................................. 8-
....... 8-4
USAGE AND DISPOSAL.......................................... 8-4
ENGINE TROUBLESHOOTING ............................... 9-2
TRACTOR TROUBLESHOOTING ........................... 9-4
INDEX.................................................................10-1
TC220-영문-수출향(법인향)-OM-00.indd 9 2020-02-20 오후 2:51:51

This manual includes information titled as WARNING, CAUTION, IMPORTANT
and NOTE. These titles indicate the following:
SAFETY AND VEHICLE DAMAGE WARNING
NOTE
This indicates that interesting or helpful information is being
provided.
This indicates that a condition may result in harm, serious
injury or death to you or other persons if the warning is not
heeded. Follow the advice provided with the warning.
WARNING
This mark indicates emphasis on notable characteristics of
working procedures, and information about technology for
easier operation.
IMPORTANT
This indicates that a condition may result in damage to your
vehicle or its equipment if the caution is not heeded. Follow
the advice provided with the caution.
CAUTION
TC220-영문-수출향(법인향)-OM-00.indd 10 2020-02-20 오후 2:51:52

KIOTI

UNIVERSAL SYMBOLS

Preheat

ECO
ECO PTO Lamp

NNeutral Position
F
EEmpty

Coolant Temperature
Warning Light


Engine Oil Pressure
Turn Signal Light
Power Take-Off Clutch
Control-On Position

HHigh Temperature
CLow Temperature

Lamp

Lamp
  -
way Lamp
CRUISE
PTO
Cruise PTO Lamp
TC220-영문-수출향(법인향)-OM-00.indd 11 2020-02-20 오후 2:51:53

TC220-영문-수출향(법인향)-OM-00.indd 12 2020-02-20 오후 2:51:53

1
1
FOR SAFE OPERATION
PRECAUTIONS BEFORE OPERATION ...................... 1-2
GENERAL PRECAUTIONS ............................................................1-2
RISK OF OVERTURNING ..............................................................1-6
PRECAUTIONS DURING OPERATION ....................... 1-9
WHEN DRIVING THE TRACTOR.................................................1-13
WHEN PARKING THE TRACTOR................................................1-15
WHEN OPERATING THE P.T.O....................................................1-15
WHEN USING THE 3-POINT HITCH ...........................................1-17
SAFETY PRECAUTIONS DURING SERVICING ....... 1-17
SAFETY PRECAUTIONS WHEN USING THE LOADER... 1-21
IMPLEMENTS AND ATTACHMENTS......................... 1-24
CLEANING THE TRACTOR....................................... 1-26
SAFETY DECAL MAINTENANCE ............................. 1-27
DECAL MOUNTING LOCATION...................................................1-27
DESCRIPTION..............................................................................1-29
CAUTIONS FOR DECAL MAINTENANCE...................................1-32
TC220-BOBCAT-OM-01.indd 1 2020-02-20 오후 2:48:57

1
-
2CK3510(H,C,CH)SE / CK4010(H,C,CH)SE
PRECAUTIONS BEFORE OPERATION
GENERAL PRECAUTIONS
A careful operator is the best opera-
tor. Most accidents can be avoided
by observing certain precautions. To
help prevent accidents, use these
safety precautions, and pay attention
to the job at hand. If you can prevent
an accident, your time will have been
well spent.
The following should never be al-
lowed to operate this machine.
• Those under the inuence of alcohol
• Women that are pregnant.
• Those under 18
• Those without driver's license
• Those who are fatigued, sick or un-
der the inuence of medicine; oth-
ers who are not qualied for certain
reasons to operate this machine
Do not operate the machine with fa-
tigue. Take a rest if necessary.
Otherwise, an unexpected accident
can occur.
Please wear the appropriate working
clothes.
Safety helmet
Fit clothes
Tight sleeves
Safety shoes
Otherwise, your clothes can be caught
into rotating parts or you may slip,
leading to an accident.
C56O101A
This tractor is basically designed for
agricultural use or similar.
Use other than the specied cannot
be covered by warranty. The manu-
facturer is not liable for any damage
resulting from unauthorized use, and
such action can lead to a dangerous
situation to a user. Authorized use
means complying with operation,
service and repair standards set by
the manufacturer.
H61O440A
Towel tucked
around the waist
C56O102A
Cigarette
Mufer
Slippers
TC220-BOBCAT-OM-01.indd 2 2020-02-20 오후 2:48:58

1
-
3FOR SAFE OPERATION
1
5. Keep safety decals clean of dirt
and debris.
6. Watch where you are going at all
times so that you are able to avoid
obstacles that can cause injury or
damage to your tractor.
7. When starting the tractor make
sure your path is clear of people to
avoid accidents caused by sudden
movements.
8. Before operating in reverse with
your tractor, you should always
check to see that the path is clear.
1.It is recommended that you read
and understand this entire manual
before operation of your new trac-
tor. Failure to do so could result in
accidents or injury.
2.Only persons who are properly
trained should be allowed to oper-
ate the tractor.
3. Read and follow all warning labels
and decals afxed to the tractor.
4. Replace any missing or damaged
decals as soon as it is practical.
A list of decals is shown on page
1-28~1-33.
T66O101A T66O102A
This tractor should be operated, ser-
vice and repaired by a well-trained
and skilled technician who is also
aware of accompanying danger.
It is necessary to follow any applicable
accident prevention practices, general
health and safety standards and trafc
regulations. The manufacturer is not
liable for any damage resulting from
unauthorized modication.
TC220-BOBCAT-OM-01.indd 3 2020-02-20 오후 2:48:58

1
-
4CK3510(H,C,CH)SE / CK4010(H,C,CH)SE
16. All persons using the tractor
should have knowledge of its
proper operation and should read
this manual carefully.
17. Never get off the tractor without
setting the parking brake, lower-
ing the implement to the ground
and shutting of the tractor.
18. No modications should be made
to your KIOTI tractor.
12. Never start the engine while
standing on the ground.
13. Only the operator should ride on
the tractor unless a passenger
seat is installed. Keep bystand-
ers away from the tractor while in
operation.
14. When getting on and off the trac-
tor, hand holds and step plates
should always be used. This will
help to prevent accidental slips
trips and falls.
15. Be sure to scrape off mud or soil
from your shoes before mounting
the tractor.
T66O103A T66O104A T66O105A
9. Never operate this tractor or
any other agricultural equipment
while under the inuence of alco-
hol, drugs or while fatigued.
10. While working in cooperation
with other tractors always com-
municate your intentions.
11. Do not start your tractor by short-
ing across the starter.
TC220-BOBCAT-OM-01.indd 4 2020-02-20 오후 2:48:59

1
-
5FOR SAFE OPERATION
1
A ROPS and CAB should never be
modied by welding, grinding or cut-
ting, as this can weaken the ROPS
structure. If any components of the
ROPS unit are damaged, They must
be replaced.
If the ROPS unit is removed or loos-
ened for any reason, the parts should
be fitted back to their original posi-
tions and all bolts should be properly
torqued.
21. Extra caution should be taken
when driving tractors with narrow
tread widths. For added stability
you should adjust your rear wheel
tread width, see page 4-54.
19. Before starting your tractor you
should depress the clutch and
make sure that all shift levers are
in the neutral position and park-
ing brake is applied.
20. For your safety ROPS with a
seat belt is recommended for all
applications.
(1) Tread
T66O106A T66O107A
NOTE
Always use seat belt when the
tractor is equipped with a ROPS
and CAB. Never use the seat
belt when tractor is not equipped
with a ROPS. (ROPS: Roll-Over
Protective Structures)
•
TC220-BOBCAT-OM-01.indd 5 2020-02-20 오후 2:49:00

1
-
6CK3510(H,C,CH)SE / CK4010(H,C,CH)SE
22. This cabin is not certified for
chemical proof, never operate
the tractor for chemical spray or
in the air contaminated by any
chemical or equivalent without
approved personal safety equip;
cartridge respiration/eye protec-
tion/gloves/etc.
݆݆݆
݆
݆
݆
T55O116A
RISK OF OVERTURNING
TG2O103A
For your safety, tractors must be
equipped with original safety belts.
In case of overturning, hold rmly the
steering wheel e DO NOT try to get
off the seat until the tractor has come
to a stop. If the doors are locked,
leave the tractor through the duly in-
dicated emergency exits.
The safe working practices
listed hereunder concerns
only a few cases of overturn-
ing risk.
The list is therefore NOT com-
prehensive of all possible
cases.
•
•
IMPORTANT
TC220-BOBCAT-OM-01.indd 6 2020-02-20 오후 2:49:00

1
-
7FOR SAFE OPERATION
1
TG2O104A
To avoid side overturning:
• Adjust the wheels to the maximum
possible track width for the type of
work you are doing.
• Lock both brake pedals together
before driving on road.
• Reduce your speed according to
work conditions. If the tractor is
equipped with a front-end loader,
carry the bucket and load as low as
possible.
• Reduce your speed before making
wide turns. DO NOT let the tractor
jump or bounce on rough terrains.
You could lose control.
• DON'T pull a load too heavy for
your tractor. It could run away on
the down slope or the tractor could
jack-knife around a towed load.
• DON'T brake suddenly. Apply
brakes smoothly and gradually.
• When going down a slope use the
throttle to slow the tractor engine
and use the same gear you would
use to up the slope. Shift into gear
before you start downhill.
• Engage four-wheel drive (if
equipped); this will give greater sta-
bility.
NEVER disengage the clutch
or attempt to shift gear after
you have started downhill.
•
WARNING
• Always go up and down slopes fol-
lowing a straight upward or down-
ward line.
• Do not put any overloads on a front
implement or a trailer. Use suitable
counter-weights to keep the tractor
stable.
• NEVER use your tractor to round
up farm animals.
TG2O105A
TC220-BOBCAT-OM-01.indd 7 2020-02-20 오후 2:49:01

1
-
8CK3510(H,C,CH)SE / CK4010(H,C,CH)SE
TG2O106A
• When operating near ditches and
banks, always keep your tractor be-
hind the shear line. Avoid ditches,
embankments and river-banks
which might cave in.
TG2O107A
• If you need cross a steep slope,
do not steer uphill, but slow down
and take a wide turn. Always drive
straight up or down a slope, never
across it. When travelling up or
down a slope, keep the heavy end
of the tractor and the implement
pointed uphill.
TG2O108A
• When driving across a slope with
mounted implements, keep such
implements on the uphill side. Do
not raise implements. Keep them
as low and near to the ground as
possible.
TC220-BOBCAT-OM-01.indd 8 2020-02-20 오후 2:49:03