Dahua DHI-ARC3008C User manual

Alarm Controller
User’s Manual
ZHEJIANG DAHUA VISION TECHNOLOGY CO., LTD. V2.0.1

User’s Manual
I
Foreword
General
This manual introduces the installation, functions and operations of the alarm controller (hereinafter
referred to as "controller"). Read carefully before using the device, and keep the manual safe for
future reference.
Models
DHI-ARC3008C
Safety Instructions
The following signal words might appear in the manual.
Signal Words Meaning
Indicates a high potential hazard which, if not avoided, will result in death
or serious injury.
Indicates a medium or low potential hazard which, if not avoided, could
result in slight or moderate injury.
Indicates a potential risk which, if not avoided, could result in property
damage, data loss, lower performance, or unpredictable result.
Provides methods to help you solve a problem or save you time.
Provides additional information as the emphasis and supplement to the
text.
Revision History
Version Revision Content Release Time
V2.0.1
●Updated wired zone function.
●Updated area outputs function.
●Updated system timing settings.
●Updated SMS messages.
●Updated digital format.
●Updated installer menu map.
December 2022
V2.0.0
●Updated language.
●Updated technical specifications.
●Updated images.
●Updated wiring and installation, installer operations,
alarm config tool and DMSS app operations.
March 2022
V1.0.1 Updated arming and disarming. October 2020
V1.0.0 First release. May 2020
Privacy Protection Notice
As the device user or data controller, you might collect the personal data of others such as their face,

User’s Manual
II
fingerprints, and license plate number. You need to be in compliance with your local privacy
protection laws and regulations to protect the legitimate rights and interests of other people by
implementing measures which include but are not limited: Providing clear and visible identification
to inform people of the existence of the surveillance area and provide required contact information.
About the Manual
●The manual is for reference only. Slight differences might be found between the manual and the
product.
●We are not liable for losses incurred due to operating the product in ways that are not in
compliance with the manual.
●The manual will be updated according to the latest laws and regulations of related jurisdictions.
For detailed information, see the paper user’s manual, use our CD-ROM, scan the QR code or visit
our official website. The manual is for reference only. Slight differences might be found between
the electronic version and the paper version.
●All designs and software are subject to change without prior written notice. Product updates
might result in some differences appearing between the actual product and the manual. Please
contact customer service for the latest program and supplementary documentation.
●There might be errors in the print or deviations in the description of the functions, operations
and technical data. If there is any doubt or dispute, we reserve the right of final explanation.
●Upgrade the reader software or try other mainstream reader software if the manual (in PDF
format) cannot be opened.
●All trademarks, registered trademarks and company names in the manual are properties of their
respective owners.
●Please visit our website, contact the supplier or customer service if any problems occur while
using the device.
●If there is any uncertainty or controversy, we reserve the right of final explanation.

User’s Manual
III
Important Safeguards and Warnings
This section introduces content covering the proper handling of the controller, hazard prevention,
and prevention of property damage. Read carefully before using the controller, and comply with the
guidelines when using it.
Transportation Requirements
●Transport the controller under allowed humidity and temperature conditions.
●Pack the controller with packaging provided by its manufacturer or packaging of the same
quality before transporting it.
●Do not place heavy stress on the controller, violently vibrate or immerse it in liquid during
transportation.
Storage Requirements
●Store the controller under allowed humidity and temperature conditions.
●Do not place the controller in a humid, dusty, extremely hot or cold site that has strong
electromagnetic radiation or unstable illumination.
●Do not place heavy stress on the controller, violently vibrate or immerse it in liquid during
storage.
●Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting a battery might
result in an explosion
●Leaving a battery in an environment with extremely high temperatures might result in an
explosion or the leakage of flammable liquids and gas.
●Subjecting a battery to extremely low air pressure might result in an explosion or the leakage of
flammable liquids and gas.
Operation Requirements
●Make sure that the power supply is correct before use.
●Do not unplug the power cord on the side of the controller while the adapter is powered on.
●Operate the controller within the rated range of power input and output.
●Transport, use and store the controller under allowed humidity and temperature conditions.
●Do not drop or splash liquid onto the controller, and make sure that there is no object filled with
liquid on the controller to prevent liquid from flowing into it.
●Do not disassemble the controller.
●Change the default access code after installation to protect the controller from being stolen.
●Use the controller within the rated range of power input and output.

User’s Manual
IV
Installation Requirements
●Do not connect the power adapter to the controller while the adapter is powered on.
●Strictly comply with the local electric safety code and standards. Make sure the ambient voltage
is stable and meets the power supply requirements of the controller.
●Do not connect the controller to two or more kinds of power supplies, to avoid damage to the
controller.
●Personnel working at heights must take all necessary measures to ensure personal safety
including wearing a helmet and safety belts.
●Do not place the controller in a place exposed to sunlight or near heat sources.
●Keep the controller away from dampness, dust, and soot.
●Put the controller in a well-ventilated place, and do not block its ventilation.
●Use an adapter or cabinet power supply provided by the manufacturer.
●The power supply must conform to the requirements of ES1 in IEC 62368-1 standard and be no
higher than PS2. Please note that the power supply requirements are subject to the controller
label.
●The controller is a class I electrical appliance. Make sure that the power supply of the controller is
connected to a power socket with protective earthing.
●Do not install or place the controller in a location that exposes it to sunlight or heat sources.
●Keep the controller away from dampness, dust, and soot.
●Keep the controller installed on a stable surface to prevent it from falling.
●Do not drop or splash liquid onto the controller, and make sure that there is no object filled with
liquid on the controller to prevent liquid from flowing into it.
●Do not disassemble the controller.
●Transport, use and store the controller under the allowed humidity and temperature conditions.
●Operating temperature: –40 °C to–10 °C (–40 °F to +14 °F).
●Affix the controller securely to the building before use.
●The power supply must be installed inside the controller.
●When installing the controller, make sure that the power plug and appliance coupler can be
easily reached to cut off power.
●The rated power of the controller is 40 W.
●Prevent liquid from dripping or splashing on the controller. Do not put any objects filled with
liquid, such as a vase, on top of the controller.
●Do not expose the battery to overheated environments such as with direct sunlight and fire.
Electrical Safety
●Improper use of the battery might result in a fire or explosion.
●Replace unwanted batteries with new batteries of the same type and model.
●Use the power cords that are recommended for the region and conform to the rated power
specifications.
●Make sure the power supply meets the SELV (Safety Extra Low Voltage) requirements, and rated
voltage conforms to the IEC60950-1 standard. The requirements of the power supply are subject

User’s Manual
V
to the controller label.
●The controller is a class I electrical appliance. Make sure that the power supply of the controller is
connected to a power socket with protective earthing
●The appliance coupler is a disconnection controller. Keep it at a convenient angle when using it.
Electrical Safety
Before acting on a system component, or while you are installing or servicing the controller, make
sure to disconnect both the primary (mains power) and secondary (battery) power supply of the
system. Also, to avoid damage from electrostatic discharge, handle the controller with care and
avoid any contact with its electronic components.
Power Supply
The power supply of the controller meets the EN 50131-6 standard, and performs the following
controls in compliance to the standard:
●Every 24 hours, the status of the alternative power supply is checked. The battery test is executed
under load.
●In the absence of mains voltage, the test is not executed.
●Every 10 seconds, the output voltage is checked.
●The output voltage is checked every 10 seconds.
●The battery is disconnected if voltage drops below 10.8 V (protection against the deep
discharge).
Battery
The battery of the controller meets the EN 50131-6 standard, and performs the following controls in
compliance to the standard:
●The controller must be equipped with a battery that has 12 V/12 Ah capacity.
●We recommend using a FG 21201 battery.
●The battery is designed with special lead calcium tin alloy grid that is built to resist corrosion and
provide a short recharge time.
●The battery adopts VRLA AGM technology and uses low resistance high microporous fiberglass
separators.
●The battery uses leak resistant post seal, faston, flag and threaded female, terminals with high
conductivity and maximum torque resistance.
●The battery is designed with one-way safety relief valves that allow gas to escape, and prevent
the ingress of oxygen
●The battery uses ABS plastic (from FGHL range flame retardant ABS plastic to IEC 707 FV0 and
UL94 FV0 - LOI greater than 28%).
●The battery supports installation in any orientation, except being permanently inverted. The
batteries can only be replaced by qualified personnel.
●The electrolyte is absorbed in fiberglass separators with 99% internal gas recombination
efficiency. Blocs are grants non-spillable and maintenance free, so their electrolytes do not
require topping up during its lifetime. Also, low self-discharge allows it a shelf life of 6 months.
Wire

User’s Manual
VI
●Ground connection
The ground connection must comply with the valid European standards. It is required that the
ground conductor be connected between the casing and the door.
●External circuit breaker
The power supply of the controller is not equipped with a circuit breaker. To ensure that controller
installation meets the local standards, an external circuit breaker or a bipolar mains switch (16A
curve C, opening stroke min. 3 mm) must be connected to an accessible part of the electric
installation (240 VAC). Also, the circuit breaker must be installed close to the controller and must be
clearly labeled.
●Mains connection (240 VAC)
The mains cable is not included. To reduce the risk of electric shock in normal operating
conditions, observe the following precautions:
◇Use a double insulation cable (with shielding) for the connection to mains power.
◇The mains cable should have a minimum diameter of 3 x 1.5 mm2and, once it has been
connected to the corresponding power input, it should be attached with a cable tie to the
mounting base of the power supply.
◇To ensure electrical safety and correct functioning of the controller, always connect the
ground conductor to the corresponding terminal between the base and the door of the
casing.
●Mains and ground connection
◇Connect the mains conductor and the ground conductor.
◇The mains conductor must be wired in the absence of voltage.
◇The ground conductor must be connected to the ground terminal of the power supply and to
the faston connector soldered to the casing.
◇It is required that the ground conductor be connected between the casing and the door.
◇For safety reasons, attach the connection cable with a cable tie to the mounting base of the
power supply.
Maintenance Requirements
●In the planning phase, to ensure the autonomy of the service requested by the standards, it is
important to size the primary (mains power) and secondary (battery) power supply correctly.
Consider that, in case of power failure, the system Is ensured to continue functioning by means
of batteries for a limited period of time, the length of which depends on the capacity and the
state of efficiency of the batteries.
●To ensure the efficiency of the burglar alarm system, it is necessary to provide an appropriate
maintenance program. The frequency of the maintenance depends on different aspects,
however, it is recommended to have the system serviced at least once every 6 months. The
maintenance operations should be made by specialized technical staff, the same who designed
and installed the system. The European standards series EN 50131 includes the possibility of
remotely executing one of the two required annual inspections.
●Replace the batteries with the correct model and dispose of the unwanted ones as instructed to
avoid failing to meet the requirements of the safeguards. Some types of lithium batteries are not

User’s Manual
VII
acceptable.
●The most important controls:
◇The status of the power supplies and batteries.
◇The status of the batteries and self-powered devices (sirens and transmitters).
◇The functional efficiency and coverage of the movement and perimeter detectors.
◇The efficiency of the control units and procedures for arming of the program.
◇The efficiency of the alarm transmission equipment (e.g. activation of the telephone call
cycle).
◇The efficiency of the warning devices.
◇The correct detection and management of the tamper alarms.
◇The other secondary functions (for example,. activation of the hold-up alarm).
◇The correct connection of the cables to the terminals.
◇The final inspection report.
●Dispose used batteries strictly according to its instructions and local regulations.
●Power off the controller before maintenance.
●To prevent explosion or fire, replace battery with the same size.

User’s Manual
VIII
Table of Contents
Foreword ........................................................................................................................................................................................................I
Important Safeguards and Warnings............................................................................................................................................III
1 Introduction ............................................................................................................................................................................................1
1.1 Overview ........................................................................................................................................................................................1
1.2 Features..........................................................................................................................................................................................1
1.3 Technical Specifications.........................................................................................................................................................2
2 Wiring and Installation ......................................................................................................................................................................8
2.1 Dimensions ...................................................................................................................................................................................8
2.2 Installation....................................................................................................................................................................................8
2.3 Main Board....................................................................................................................................................................................9
2.3.1 Main board Ports.............................................................................................................................................................9
2.3.2 Ports ....................................................................................................................................................................................10
2.3.3 DIP Switch.........................................................................................................................................................................12
2.3.3.1 Function..................................................................................................................................................................12
2.3.3.2 Restoring Factory Default Settings...........................................................................................................13
2.4 Wiring ............................................................................................................................................................................................14
3 Startup .....................................................................................................................................................................................................15
3.1 Setting Keypad and Expansion Module Addresses................................................................................................15
3.2 Setting Card Reader Address.............................................................................................................................................15
3.3 Powering on the Controller ................................................................................................................................................16
3.4 Powering on the Keypad......................................................................................................................................................17
3.5 Factory Default Settings ......................................................................................................................................................17
3.6 Lead-acid Battery.....................................................................................................................................................................17
4 Keypad .....................................................................................................................................................................................................18
4.1 Dimensions .................................................................................................................................................................................18
4.2 Installation..................................................................................................................................................................................18
4.3 Wiring ............................................................................................................................................................................................20
4.4 Structure ......................................................................................................................................................................................21
4.5 Keys ................................................................................................................................................................................................21
4.5.1 Numeric Keys (from 0-9)............................................................................................................................................22
4.5.2 Function Keys .................................................................................................................................................................22
4.5.3 Key Combination Operations .................................................................................................................................23
4.6 LED Indicators ...........................................................................................................................................................................25
4.6.1 Overview ...........................................................................................................................................................................25
4.6.2 Status ..................................................................................................................................................................................25

User’s Manual
IX
4.7 LCD Display.................................................................................................................................................................................26
5 Expansion Module (Optional) ......................................................................................................................................................29
5.1 Dimensions .................................................................................................................................................................................29
5.2 Wiring ............................................................................................................................................................................................30
5.3 Module Functions....................................................................................................................................................................31
6 4G Module (Optional).......................................................................................................................................................................33
6.1 Dimensions .................................................................................................................................................................................33
6.2 Installing 4G Modules............................................................................................................................................................33
7 Installer Operations...........................................................................................................................................................................37
7.1 Entering the Installer Menu................................................................................................................................................37
7.2 Installer Menu Options .........................................................................................................................................................38
7.3 Keypads ........................................................................................................................................................................................38
7.4 Communicator ..........................................................................................................................................................................40
7.5 Power Supplies .........................................................................................................................................................................41
7.6 Wired Zones................................................................................................................................................................................42
7.7 Key Type Zone...........................................................................................................................................................................46
7.8 In and Zones...............................................................................................................................................................................47
7.9 Outputs.........................................................................................................................................................................................48
7.9.1 Entering Output Menu ...............................................................................................................................................48
7.9.2 Configuring Output Categories.............................................................................................................................49
7.10 Areas............................................................................................................................................................................................55
7.11 System Functions..................................................................................................................................................................57
7.12 System Timing........................................................................................................................................................................59
7.13 System Timer...........................................................................................................................................................................60
7.14 Access Codes ...........................................................................................................................................................................62
7.14.1 Authority Level............................................................................................................................................................62
7.14.2 Configuring Authority Level.................................................................................................................................62
7.14.3 Configuring Access Codes .....................................................................................................................................64
7.14.3.1 Setting an Access Code ................................................................................................................................64
7.14.3.2 Deleting an Existing Access Code ...........................................................................................................65
7.14.3.3 Customizing the Description of Access Code....................................................................................65
7.15 Date and Time.........................................................................................................................................................................65
7.16 Holiday .......................................................................................................................................................................................66
7.17 Telephone Number ..............................................................................................................................................................67
7.18 Remote Service.......................................................................................................................................................................69
7.19 Monitor Station......................................................................................................................................................................69
7.20 Vocal Messages......................................................................................................................................................................70

User’s Manual
X
7.21 SMS Messages.........................................................................................................................................................................74
7.22 Digital Format.........................................................................................................................................................................78
7.23 TCP/IP Network ......................................................................................................................................................................82
7.24 Log Events ................................................................................................................................................................................82
7.25 2G/4G Module.........................................................................................................................................................................83
7.26 Language ..................................................................................................................................................................................84
7.27 RFID Cards ................................................................................................................................................................................84
7.28 Expansion Modules..............................................................................................................................................................85
7.29 SIA.................................................................................................................................................................................................86
8 Alarm Config Tool...............................................................................................................................................................................90
8.1 Home Page ..................................................................................................................................................................................90
8.2 Setting...........................................................................................................................................................................................91
8.2.1 Client...................................................................................................................................................................................91
8.2.1.1 Managing a Client..............................................................................................................................................91
8.2.1.1.1 Adding a Client.........................................................................................................................................91
8.2.1.1.2 Modifying a Client ..................................................................................................................................92
8.2.1.1.3 Copying a Client ......................................................................................................................................92
8.2.1.1.4 Deleting a Client......................................................................................................................................92
8.2.1.2 Searching a Client..............................................................................................................................................92
8.2.1.3 Configuring Client Parameters ...................................................................................................................93
8.2.2 Utility ...............................................................................................................................................................................102
8.2.3 Installer...........................................................................................................................................................................103
8.2.4 Language .......................................................................................................................................................................103
8.3 Updating Device....................................................................................................................................................................103
9 DMSS App Operations...................................................................................................................................................................105
9.1 Installing the App .................................................................................................................................................................105
9.2 Adding Alarm Controller...................................................................................................................................................105
9.3 Area Arming and Disarming............................................................................................................................................106
9.4 Zone Settings..........................................................................................................................................................................108
9.5 Configuring Device on App .............................................................................................................................................109
9.5.1 Configuring Alarm Controller..............................................................................................................................109
9.5.2 Configuring Area........................................................................................................................................................111
10 FAQ.......................................................................................................................................................................................................112
Appendix 1 Keypad Buzzer Sound .............................................................................................................................................114
Appendix 2 Event Log Messages.................................................................................................................................................115
Appendix 3 Installer Menu Map...................................................................................................................................................117
Appendix 4 Cybersecurity Recommendations.....................................................................................................................123

User’s Manual
1
1 Introduction
1.1 Overview
The alarm controller is a high performance anti-theft controller designed for the middle and small
alarm solution application. Adopting embedded Linux operation system and relying on embedded
platform, the system can run steadily with advanced controlling technology and strong data
transmission ability. The embedded design also supports the product with high security and
excellent stability.
The controller can work both independently and with professional app in mobile phone, which is
convenient for remote viewing and alarm status controlling. The product can also be connected to
the network to form the strong security monitoring network, working with the professional alarm
platform software to show the strong networking and remote monitoring ability.
The controller can be widely applied in the store, warehouse, family, and so on for security
protection.
1.2 Features
The functions might be different depending on the software and hardware version of the model you
purchased.
●8 onboard wired zones.
●Support 1-way siren control and 2-way MOS transistor output on the controller.
●With the expansion module (consists of 8 input modules and 8 output modules), alarm input and
alarm output channels are increasing to 72 and 82 respectively.
●Outputs operation follows system events, zone events, area, link and scheduling programs.
●1 case tamper port for the alarm controller.
●1 siren tamper input.
●Up to 8 areas, and every area with 2 partitions.
●Up to 8 keypads.
●Up to 100 users with 8 authority levels for different users (supervisor, manager, master, user,
temporary, duress, patrol, and technician).
●1000 events log.
●Supports more than 11 zone types.
●7 sorts of zone terminations, including closed-circuit (NC), open-circuit (NO), end-of-line (EOL)
resistors, double end-of-line (DEOL) resistors, triple end-of-line (3DEOL) resistors, inertial type for
vibration detector and pulse type for roller shutter.
●Configurable zone resistance (2K7, 4K7, and 6K8).
●With 2 RS-485 ports for keypads connection and extended connections.
●With PSTN port for alarm event report function, supporting CID (Contact ID).
●3 telephone numbers for monitor station (PSTN), 8 telephone numbers for vocal message, and 8
telephone numbers for SMS.

User’s Manual
2
●With GSM/GPRS/LTE network ports for events SMS reporting and remote control, events vocal
message reporting by dialing and remote control, and mobile phone app connection ability
when Ethernet connection is failed.
●With 10/100M self-adaptive Ethernet port.
●Supports abnormality alarm, including network disconnected alarm, PSTN fault alarm, tampering
alarm, low battery alarm, battery loss alarm, power loss alarm, and keyboard faults alarm.
●In-field firmware upgradable.
●App-based system control through DMSS.
●Arm and disarm areas with RFID cards.
●Access to the third party platform with SIA.
1.3 Technical Specifications
This section contains technical specifications of the controller. Please refer to the ones that
correspond with your model.
Table 1-1 Technical specifications
Type Parameter Description
Port
Alarm Input 8 channels, can be expanded to 72 for zone alarm input
Alarm Output 2 channels, can be expanded to 82 (channel 1–2: MOS
outputs, channel 3–82: Relay outputs)
Network 1 RJ-45 10M/100M self-adaptive Ethernet port
PSTN
One group of PSTN RJ-11 ports that support contact ID
protocol (with PSTN module)
3 telephone numbers for monitor station (PSTN)
RS-485 2-channel RS–485 ports, support keyboard (A1B1) and
expansion module (A2B2) access
2G Operating frequency:
GSM850/GSM900/DCS1800/PCS1900 MHz
4G
LTE-FDD: B1/B3/B5/B7/B8/B20
LTE-TDD: B38/B40/B41
GSM/EDGE: B3/B8
Siren 1 × 12 V/1 A siren output port
Battery 12 V battery port
Auxiliary Power
Output 2 × 12 V/1 A AUX power output ports
Tamper 1 case tamper port for the alarm controller
1 siren tamper input
Function
SMS
Notification
Supports up to 8 telephone numbers for SMS and remote
control (with 2G or 4G module)
Phone Call
Notification
Supports up to 8 telephone numbers for vocal message
(with 2G or 4G module)

User’s Manual
3
Type Parameter Description
Network
Protocol TCP/IP, DHCP, static IP, P2P
Configuration
Method Keypad and client software
Arm and Disarm
Method
Keyboard, swipe card, DMSS App, SMS, DSS Professional,
and VTH
External
Agreement Supports customized access to the third parties by SIA
Number of
Keypads Max. 8 keypads
Area 8 areas
Partition Each area includes 2 partitions
Timers
8 timers, can be used for user authorization restrictions,
output linkage control, automatic arming and disarming
control, and more
Power
Management
Automatic switching between main power supply and
backup power supply
Alarm for main power loss
Alarm for battery loss and battery voltage fault
Event Logs Max. 1000
Component
data for non-
volatile
memory
components
(duration of
data
maintenance)
Flash: More than 20-year data retention
User
Management
Max. 100 users
7 user levels: Supervisor, Manager, Master, User,
Temporary, Duress, and Patrol
1 Technician
Query Query for zone fault, system fault, program version, signal
strength detection, and GPRS
Language English, Italian
App DMSS app and DMSS Plus app not certified IMQ-Security
system
RFID Card Arm and disarm by swiping card (with
ASR1101A/ASR1101A-D)
Electrical
specific cations
CPU board
CPU consumption 360 [email protected] V
Output voltage control 9–16 VDC
Detector power supply 14.5 VDC
Siren power supply 14.5 VDC

User’s Manual
4
Type Parameter Description
Power Supply
Main Power Type A: 110–240 VAC, 50/60 Hz
Conformity EN 50131-6
Max.
Consumption 800 mA@230 VAC; 1300 mA@ 115 VAC
Max. Output
Voltage 2.76 [email protected] VDC
Max. Current
Available 2.76 A
Max. Ripple Max. 30mV
Power
Consumption Max. 40 W
Max. Output
Voltage 12 V; 1A
Mains fuse (non
-replaceable) RT21: 5 A
Battery
Battery
Capacity 1 x 12 V/7.2 Ah
Battery Flame
Class UL94 FV0
Standards
IEC 60896 Part 21 - VRLA methods of testing
IEC 60896 Part 22 - VRLA requirements
Eurobat 3-5 years standard commercial for FG FGH
FGC and 10-12 years long life for FGHL
UL Recognized
Battery Low
Battery
Threshold
11.8 VDC
Battery Restore
Threshold 12.3 VDC
Battery Standby Up to 12 hrs
440 mA as max load in order to have autonomy of 12 h.
Release Voltage ＜10.8 V
Failure
Signaling ＜5 V
Overcharge
Signaling 14.5 V
Battery
Recharge Time 80% approx. 48 h
ARC Signaling
ATS Category SP2 (PSTN or GSM)
DP1 (PSTN + GSM)
Acknowledgem
ent Operation Pass through

User’s Manual
5
Type Parameter Description
Primary
Transmission
Path
LAN (NO 50136-2)
Secondary
Transmission
Path
GPRS/4G /PSTN
Notification
Equipment B/C/E
General
Operating
Temperature –10 °C to +55 °C (+14 °F to +131 °F)
Relative
Humidity 10%–90% (RH)
Product
Dimensions
275.0 mm× 275.0 mm× 77.0 mm (10.83" × 10.83" × 3.03")
(L× W× H)
Installation Wall mount
Net Weight
(without
battery)
≤3 kg
Expansion Bolts
Outer diameter: 5.5 mm
Inner diameter: 2.9 mm
Length: 24.5 mm
Quantity: 4
Self-tapping
Screw
Diameter: 4 mm
Length: 25 mm
Quantity: 4
Certifications
CE: 4789104635
EN 50131-3, EN 50131-6, EN 50136-2
Security Grade 2
Environment Class II
Table 1-2 ATE category
ATE
Category
Reporting
Time Protocols Communication Devices Communication Device to be Used
- - - PSTN 2G/3G IP -
SP2 25 h Standard √
The check marked
communication
device
SP3 30 min Standard √ √
Only one of the two
check marked
communication
devices
SP4 3 min Encrypted √ √
Only one of the two
check marked
communication
devices

User’s Manual
6
ATE
Category
Reporting
Time Protocols Communication Devices Communication Device to be Used
- - - PSTN 2G/3G IP -
SP5 90 s Encrypted √ √
Only one of the two
check marked
communication
devices
DP1 25 h Standard √ √ √
Only two of the
three check marked
communication
devices
DP2 30 min Standard √ √ √
Only two of the
three check marked
communication
devices
DP3 3 min Encrypted √ √
The two check
marked
communication
devices
DP4 90 s Encrypted √ √
The two check
marked
communication
devices
ATE: Alarm transmission equipment.
SPx (Single Path): A value that indicates the performance level achieved by a single
communication device, according to the EN 50136–1 standard.
DPx (Double Path): A value that indicates the performance level achieved by a combination of
two communication devices, according to the EN 50136–1 standard.
Reporting time: The reporting time is prescribed based on the standard of each level of
performance. Reporting time is the maximum time available to report when an alarm
transmission device fails. Alarm transmission devices meet this requirement by regularly
reporting their status through a specific symbolic test function.
Protocols: Indicates the security level of the protocols to be used for the notification of failures.
Standard protocols and voice protocols are encrypted. High security protocols are encrypted with
an AES 128 bit or AES 256 bit encryption key.
Communication devices: Implemented communication devices.
Communication devices to be used: Indicates the number of and which communication devices
are to be used based on the ATE category.
Table 1-3 Technical specification
Technical Specification Description
ACE Classification Type A
Environmental Class II
Installation Wall mount
Table 1-4 Terms and definitions
Term Description
Area 8 areas that can be armed.

User’s Manual
7
Term Description
Zone Protection zones under area.
Partition The scope of partition is larger than zone and under area.
Numeric key Key 0–9 on the keypad.
Function key Other keys except numeric keys, such as ESC and ENTER.
Key combination + numeric key.
User menu Menus programmed by the user.
Installer menu Menus programmed by the technician.
Access code A specified code, from 4 to 6 digits, that allows the user to operate
the keypad.
1 EOL The detector type can be NC, and returns three status: normal,
alarm and short circuit.
2 EOL The detector type can be NC, and returns four status: normal,
alarm, tamper, and short circuit prevention.
3 EOL The detector type can be NC, and returns five status: normal,
alarm, tamper, anti-masking, and short circuit prevention.

User’s Manual
8
2 Wiring and Installation
This chapter introduces the main ports, wiring, and installation of the alarm controller.
2.1 Dimensions
Figure 2-1 Dimensions (unit: mm [inch])
2.2 Installation
Prerequisites
Make sure to prepare following expansion bolts and self-tapping screws first.
●Expansion bolts
Outer diameter: 5.5 mm; inner diameter: 2.9 mm; length: 24.5 mm; quantity: 4.
●Self-tapping screw
Diameter: 4 mm; length: 25 mm; quantity: 4.
The controller supports wall mount.
Procedure
Step 1 Unpack the box and take out the expansion bolts and self-tapping screws.
Step 2 Drill screw holes with a diameter of about 5.5 mm and a depth of about 24.5 mm on the
mounting surface.

User’s Manual
9
Step 3 Insert expansion bolts into the drilled screw holes, and then put in and fasten the self-
tapping screws.
Make sure to leave about 5 mm distance between the bottom surface of the screw head
and the top surface of the expansion bolt.
Step 4 Fix the controller with the screws.
Figure 2-2 Install the controller
2.3 Main Board
2.3.1 Main board Ports
The PSTN module, 2G module, and 4G are not supplied with standard models, and you should
purchase separately if needed.