Daikin BSVQ-P Dimension Guide

EDUS 39 - 800 - F8
AMERICAS
BSVQ-P
BS Units

EDUS39-800-F8
BSVQ-P 1
BSVQ-P
BS Units
1. Specifications ..............................................................................................2
2. Dimensions .................................................................................................3
3. Piping Diagrams..........................................................................................5
4. Wiring Diagrams..........................................................................................6
5. Electric Characteristics................................................................................7
6. Sound Levels ..............................................................................................8
7. Installation ...................................................................................................9
8. Accessories...............................................................................................24

Specifications EDUS39-800-F8
2BSVQ-P
1. Specifications
BS Units
Note:
★1 In case of connecting with a 07~18 type indoor unit, match to the size of field pipe using the attached pipe.
(Connection between the attached pipe and the field pipe must be brazed.)
★2 In case of connecting with indoor unit capacity index 54 or more and 60 or less, match to the size of the field pipe using the attached pipe.
(Connection between the attached pipe and the field pipe must be brazed.)
Model BSVQ36PVJU BSVQ60PVJU
Power Supply 1 Phase 60Hz 208~230V 1 Phase 60Hz 208~230V
Total Capacity Index of Connectable Indoor
Unit Less than 36 Less than 60
No. of Connectable Indoor Units Max. 5 Max. 8
Casing Galvanized Steel Plate Galvanized Steel Plate
Dimensions: (H×W×D) in 8-1/8 × 15-1/4 × 12-13/16 8-1/8 × 15-1/4 × 12-13/16
Sound Absorbing Thermal Insulation
Material Foamed Polyurethane, Frame Resisting Needle Felt Foamed Polyurethane, Frame Resisting Needle Felt
Piping
Connection
Indoor
Unit
Liquid Pipes φ3/8 C1220T (Brazing Connection) ★1φ3/8 C1220T (Brazing Connection)
Gas Pipes φ5/8 C1220T (Brazing Connection) ★1φ5/8 C1220T (Brazing Connection) ★2
Outdoor
Unit
Liquid Pipes φ3/8 C1220T (Brazing Connection) φ3/8 C1220T (Brazing Connection)
Suction Gas Pipes φ5/8 C1220T (Brazing Connection) φ5/8 C1220T (Brazing Connection) ★2
Discharge Gas
Pipes φ1/2 C1220T (Brazing Connection) φ1/2 C1220T (Brazing Connection) ★2
Mass Lbs 26 26
Standard Accessories Installation Manual, Attached Pipe, Insulation Pipe Cover,
Clamps Installation Manual, Attached Pipe, Insulation Pipe Cover, Clamps
Drawing No. 4D058233A 4D058234A

EDUS39-800-F8 Dimensions
BSVQ-P 3
2. Dimensions
BSVQ36PVJU
φ3/8 brazing connection
Description
φ3/8 brazing connection
Liquid pipe connection port Suction gas pipe connection port Electric box (Note 1.) Grounding terminal
φ1/4 brazing connection φ5/8 brazing connection φ5/8 brazing connection φ1/2 brazing connection M4 M8~M10
Liquid pipe connection port Suspension brackets
Number
1 2 3 4 5 6 7 8
9
10 Attached pipe (2) (Note. 3)
Attached pipe (1) (Note. 3)
Part name
φ1/2 brazing connectionHP/LP gas pipe connection port
Gas pipe connection port
(Servicing space)
Servicing space
(Servicing space)
2 or more
3 or more
(Servicing space)
10 or more
(Servicing space)
10 or more
(In case of use Attached pipe)
(Servicing space)
12 or more
(Suspension bolt pitch)
(Suspension bolt pitch)
(Servicing space)
18 (Note 2.)
8-5/812
(6-3/16)
16-7/8
(6-5/16)
Inspection door
Location of unit's Name Plate…Right side of electric box
(Note 1.)
1-7/8
2-5/88-3/8
(4-5/16)
8-1/8
6-5/8
1-7/8
15-1/4
7/8
2-1/16
10-3/16
2-13/16
(4-5/16)
4-5/8
2-13/16
5-3/16
3/8
7-9/16
3-13/16
Notes) 1. Electric box can also be fixed on the other side
of the unit.
2. Be sure to install a inspection door at electric
box side.
3. Attached pipe is only used in case of
connecting with a 07~18 class indoor unit.
4. Small sound of refrigerant will be made, which
may be disturbing. Do not install it at the place such as bedroom under roof.
1
2
3
4 9 5
10
7
8
6
3D058236

Dimensions EDUS39-800-F8
4BSVQ-P
BSVQ60PVJU
(Servicing space)
(Suspension bolt pitch)
(Suspension bolt pitch)
8-5/8
(8-5/8)
(8-9/16)
12
16-7/8
(8-9/16)
18 (Note 2.)
Inspection door
10-3/16
8-3/8
(4-5/16)
15-1/4
7-9/16
3/8
3-13/16
1-7/8
4-5/8
7/8
8-1/8
(4-5/16)
2-13/16
5-3/16
2-13/16
2-1/16
6-5/8
1-7/8
2-5/8
(Note 1.)
Location of unit's Name Plate…Right side of electric box
Servicing space
(Servicing space)
(Servicing space)
2 or more
3 or more
(Servicing space)
10 or more
(Servicing space)
10 or more
(In case of use Attached pipe)
(Servicing space)
13-3/4 or more
(Servicing space)
13-3/4 or more
Notes) 1. Electric box can also be fixed on the other side
of the unit.
2. Be sure to install a inspection door at electric
box side.
3. Attached pipe is only used in case of connecting
with indoor unit capacity indey 54 or more and 60 or less.
4. Small sound of refrigerant will be made, which
may be disturbing. Do not install it at the place such as bedroom under roof.
φ3/8 brazing connection
Description
φ3/8 brazing connection
Liquid pipe connection port Suction gas pipe connection port Electric box (Note 1.) Grounding terminal
φ5/8 brazing connection φ5/8 brazing connection φ5/8 brazing connection φ3/4 brazing connection M4 M8~M10
Liquid pipe connection port Suspension brackets
Number
1 2 3 4 5 6 7 8
9
10 Attached pipe (2) (Note. 3)
Attached pipe (1) (Note. 3)
Part name
φ1/2 brazing connection
HP/LP gas pipe connection port
Gas pipe connection port
19
2
10
3
4 9
5 7
6
8
3D058237

EDUS39-800-F8 Piping Diagrams
BSVQ-P 5
3. Piping Diagrams
4D057985A

Wiring Diagrams EDUS39-800-F8
6BSVQ-P
4. Wiring Diagrams
POWER SUPPLY
~208-230V
60Hz
RED
HAP
X1A
Y4E
F1
Y1E
X5A
X1M
BLU
F1
Y3E
NOTE) 7.
F1U
Y5E
X6A
L1
OUTDOOR UNIT
X8A
F2
DS2
INDOOR UNIT
F2
X7A
X2M
L2
NOTE) 3.
DS1
Y2E
X4A
X1M
X2A
A1P
Z1C N=2
PS
Y4E M6
6
Y3E M
CAB
6
Y1E M Y2E 6
M
6
Y5E M
BS UNIT TOP
TO IN/D
UNIT
TO OUT/D
UNIT
Y5E
CONNECTOR FOR OPTIONAL PARTS
X2M
Y4E
NOISE FILTER (FERRITE CORE)
PRINTED CIRCUIT BOARD
F1U
Z1C
X1M (A1P)
DIP SWITCH
ELECTRIC EXPANSION VALVE (MAIN DISCHARGE)
X1M PS Y1E
ELECTRIC EXPANSION VALVE (SUB DISCHARGE)
TERMINAL STRIP (CONTROL)
A1P
FLASHING LAMP (SERVICE MONITOR-GREEN)
Y3E
ELECTRIC EXPANSION VALVE (SUB COOL) FUSE (T, 3.15A, 250V)
Y2E
ELECTRIC EXPANSION VALVE (SUB SUCTION)DS1, DS2 ELECTRIC EXPANSION VALVE (MAIN SUCTION)
TERMINAL STRIP (C/H SELECTOR) SWITCHING POWER SUPPLY (A1P) TERMINAL STRIP (POWER) X2A
HAP
CONNECTOR (WIRING EXTERNAL CONTROL ADAPTOR FOR OUTDOOR UNIT)
BSVQ60PVJUBSVQ36PVJU
OFF ON
DS1
1234 1234 1234 1234
DS2 DS2DS1 OFF
ON
FOR USING DIP SWITCH (DS1 · 2), REFER TO INSTALLATION MANUAL OR "SERVICE PRECAUTION" LABEL ON EL. COMPO. BOX COVER.
NOTES) 1. THIS WIRING DIAGRAM APPLIES TO THE BS UNIT ONLY.
2. : TERMINAL STRIP, : CONNECTOR, : TERMINAL : FIELD WIRING, : PROTECTIVE EARTH 3. WHEN USING THE COOL/HEAT SELECTOR (OPTIONAL ACCESSORY),
CONNECT IT TO TERMINALS A, B AND C ON X2M.
4. AS FOR WIRING TO THE IN/D UNIT (F1) · (F2) AND OUT/D UNIT (F1) · (F2)
ON X1M (A1P), REFER TO INSTALLATION MANUAL.
5. SYMBOLS SHOW AS FOLLOWS. (BLU : BLUE RED : RED) 6. USE COPPER CONDUCTORS ONLY. 7. DIP SWITCH (DS1 · 2) INITIAL SETTINGS ARE AS FOLLOWS.
3D058235A

EDUS39-800-F8 Electric Characteristics
BSVQ-P 7
5. Electric Characteristics
4D058238

Sound Levels EDUS39-800-F8
8BSVQ-P
6. Sound Levels
Overall
Octave Band Level
208V~230V
Ceiling Mounted Type Notes:
Operation noise differs with operation and ambient
conditions.
dBA
Model 208~230V, 60Hz
Operating Sound Stoppage Sound
BSVQ36PVJU 42 32
BSVQ60PVJU 43 32
BSVQ36P BSVQ60P
4D059692 4D059693

EDUS39-800-F8 Installation
BSVQ-P 9
7. Installation
Center of Gravity
3D059694
1. SAFETY CONSIDERATIONS
Please read these “SAFETY CONSIDERATIONS” carefully before installing air conditioning equipment and
be sure to install it correctly. After completing the installation, make sure that the unit operates properly during
the start-up operation.
Please instruct the customer on how to operate the unit and keep it maintained.
Also, inform customers that they should store this installation manual for future reference.
This air conditioner comes under the term “appliances not accessible to the general public”.
Meaning of danger, warning, caution and note symbols.
DANGER ..........Indicates an imminently hazardous situation which,if not avoided, will result in death
or serious injury.
WARNING ........Indicates a potentially hazardous situation which, if not avoided, could result in death
or serious injury.
CAUTION .........Indicates a potentially hazardous situation which, if not avoided, may result in minor
or moderate injury. It may also be sued to alert against unsafe practices.
NOTE ................Indicates situation that may result in equipment or property-damage-only accidents.
DANGER
• Refrigerant gas is heavier than air and replaces oxygen. A massive leak could led to oxygen deple-
tion, especially in basements, and an asphyxiation hazard could occur leading to serious injury or
death.
• Do not install unit in an area where flammable materials are present due to the risk of explosion
resulting in serious injury or death.
• If the refrigerant gas leaks during installation, ventilate the area immediately.
Refrigerant gas may produce toxic gas if it comes into contact with fire such as from a fan, heater, stove or
cooking device. Exposure to this gas could cause severe injury or death.
• After completing the installation work, check that the refrigerant gas does not leak.
Refrigerant gas may produce toxic gas if it comes into contact with fire such as from a fan, heater, stove or
cooking device. Exposure to this gas could cause severe injury or death.