Daikin FAYP71BV1 Instruction manual

TECHNICAL DATA
Split-Sky Air
FAYP-B
Wall Mounted Unit

Split
Sky Air
Zandvoordestraat 300, B-8400 Oostende
Internet http://www.daikin.be
Daikin units comply with the European
regulations that guarantee the safety of
the product.
Daikin Europe NV is participating
in the EUROVENT Certification Programme.
Products are as listed in the EUROVENT
Directory of Certified Products.
Prepared in Belgium by Goekint Graphics • 05/2001
ISO14001 assures an effective environmental
management system in order to help protect
human health and the environment from the potential
impact of our activities, products and services and to
assist in maintaining and improving the quality of
the environment
Daikin Europe NV is approved by LRQA for its Quality
Management System in accordance with the ISO9001
standard. ISO9001 pertains to quality assurance regarding
design, development, manufacturing as well as to services
related to the product.
DAIKIN PRODUCTS ARE DISTRIBUTED BY :
Specifications are subject to change without prior notice

TABLE OF CONTENTS
FAYP-B
1 Features ...................................................................................................... 2
2 Specifications ........................................................................................ 3
Nominal capacity, capacity steps and nominal input
Technical specifications
Electrical specifications
3 Dimensional drawings ................................................................. 7
4 Piping diagrams ................................................................................. 8
5 Wiring diagrams ................................................................................ 9
6 Sound level ............................................................................................. 10
Sound level data
Sound pressure spectrum
7 Air velocity and temperature distributions ................. 11
8 Accessories .............................................................................................. 15
Standard accessories
Optional accessories
9 Control systems ................................................................................. 16
10 Safety device settings ................................................................... 18
11 Installation ............................................................................................... 18
For capacity tables, please refer to the outdoor units concerned
• Wall Mounted Unit •R-407C •FAYP71-100BV1
1
•Split - Sky Air •Indoor Units

1 Features
+Ideal for shops, restaurants or offices requiring maximum
floor space for furniture and fittings
+Fits neatly on a wall
+Automatic air flow director ensures uniform airflow and
temperature distribution
+Extremely quiet in operation both indoors and outdoors
+For equal distribution in larger rooms, up to 3 indoor units
can be connected to 1 outdoor. They are operated from 1
remote control
+The (wired) remote control has a programmable timer
+Centralised control of several units can be achieved via 3
wired controls
- centralised remote control
- unified ON/OFF control
- Schedule timer
21308qx
6)(6
Optional Optional Heat pump
2 steps
Optional
• Wall Mounted Unit •R-407C •FAYP71-100BV1
3
1
2•Split - Sky Air •Indoor Units

2 Specifications
NOMINAL CAPACITY and NOMINAL INPUT
For indoor units only:
INDOOR UNITS FAYP71BV1 FAYP100BV1
NOMINAL INPUT Cooling kW 0.086 0.101
For combination indoor units + outdoor units:
INDOOR UNITS FAYP71BV1 FAYP100BV1
OUTDOOR UNITS RP71B7V1/W1/T1 RP100B7V1/W1/T1
NOMINAL CAPACITY
(2) Cooling (1) kW 7.1 10.0
NOMINAL INPUT Cooling kW 2.66/2.65/2.65 3.53/3.51/3.51
TECHNICAL SPECIFICATIONS
INDOOR UNITS FAYP71BV1 FAYP100BV1
DIMENSIONS Unit H mm 360 360
W mm 1,570 1,570
D mm 200 200
WEIGHT Unit kg 26 26
MATERIAL Unit Resin
COLOUR Unit White
SOUND LEVEL Sound pressure (3) high dBA 41 45
low dBA 37 41
Sound power (4) high dBA 57 61
low dBA 53 57
FAN Air flow rate high m
3
/min 19 23
medium m
3
/min 
low m
3
/min 16 19
Speed steps 2 steps
high rpm 
low rpm 
Type Cross flow fan
Qty x model 1 x (QCL1163MA+QCL1163MB)
Qty x motor output W 1 x 46 1 x 49
HEAT EXCHANGER Type Cross fin coil (Multi louver fins and N-hiX tubes)
Rows x stages x fin pitch mm 2 x 12 x 1.4 2 x 12 x 1.4
Face area m
2
0.332 0.332
AIR FILTER 
AIR DIRECTION CONTROL 
TEMPERATURE CONTROL 
PIPING CONNECTIONS liquid mm φ9.5(flare) φ9.5(flare)
gas mm φ15.9(flare) φ19.1(flare)
drain mm VP20, I.D. φ20 VP20, I.D. φ20
drain mm VP20, O.D. φ26 VP20, O.D. φ26
INSULATION
MATERIAL Heat insulation Foamed polystyrene/foamed polyethylene
Sound absorbing insulation 
For outdoor units Pair application See chapter R-GZ7/RP-B7
• Wall Mounted Unit •R-407C •FAYP71-100BV1
3
2
3
•Split - Sky Air •Indoor Units

ELECTRICAL SPECIFICATIONS
For indoor units only: FAYP71BV1 FAYP100BV1
CURRENT Nominal running
current
cooling A
For combination indoor units + outdoor units: FAYP71BV1 FAYP100BV1
RP71B7V1/W1/T1 RP100B7V1/W1/T1
CURRENT Nominal running
current
cooling A
Maximum running
current
cooling A
For indoor units only: FAYP71BV1 FAYP100BV1
POWER SUPPLY V1 V1
NOMINAL
DISTRIBUTION
SYSTEM VOLTAGE
Phase 1∼1∼
Frequency Hz 50 50
Voltage V 230 230
NOTES
1 Nominal cooling capacities are based on: indoor temperature 27°CDB/19.5°CWB * outdoor temperature 35°CDB * equivalent refrigerant
piping length: 7.5m * level difference: 0m.
2 Capacities are net, including a deduction for indoor fan motor heat.
3 The sound pressure level is measured in an anechoic room at 1m distance from the unit. It is a relative value, depending on the distance
and acoustic environment. For measuring conditions: please refer to item 6 of this chapter.
4 The sound power level is an absolute value indicating the ’’power’’ which a sound source generates.
• Wall Mounted Unit •R-407C •FAYP71-100BV1
2 Specifications
3
2
4•Split - Sky Air •Indoor Units

NOMINAL CAPACITY and NOMINAL INPUT
For indoor units only:
INDOOR UNITS FAYP71BV1 FAYP100BV1
NOMINAL INPUT Cooling kW 0.086 0.101
Heating kW 0.086 0.101
For combination indoor units + outdoor units:
INDOOR UNITS FAYP71BV1 FAYP100BV1
OUTDOOR UNITS RYP71B7V1/W1 RYP100B7V1/W1
NOMINAL CAPACITY
(3) Cooling (1) kW 7.1 10.0
Heating (2) kW 7.7 10.8
NOMINAL INPUT Cooling kW 2.66/2.65 3.53/3.51
Heating kW 2.64/2.62 4.3/4.0
TECHNICAL SPECIFICATIONS
INDOOR UNITS FAYP71BV1 FAYP100BV1
DIMENSIONS Unit H mm 360 360
W mm 1,570 1,570
D mm 200 200
WEIGHT Unit kg 26 26
MATERIAL Unit Resin
COLOUR Unit White
SOUND LEVEL Sound pressure
(cooling/heating) (4) high dBA 41/42 45/45
low dBA 37/38 41/41
Sound power
(cooling/heating) (5) high dBA 57/58 61/61
low dBA 53/54 57/57
FAN Air flow rate high m
3
/min 19/19 23/23
medium m
3
/min 
low m
3
/min 16/16 19/19
Speed steps 2 steps
high rpm 
low rpm 
Type Cross flow fan
Qty x model 1 x (QCL1163MA+QCL1163MB)
Qty x motor output W 1 x 46 1 x 49
HEAT EXCHANGER Type Cross fin coil (Multi louver fins and N-hiX tubes)
Rows x stages x fin pitch mm 2 x 12 x 1.4 2 x 12 x 1.4
Face area m
2
0.332 0.332
AIR FILTER 
AIR DIRECTION CONTROL 
TEMPERATURE CONTROL 
PIPING CONNECTIONS liquid mm φ9.5flare φ9.5flare
gas mm φ15.9flare φ19.1flare
drain mm VP20, I.D. φ20 VP20, I.D. φ20
drain mm VP20, O.D. φ26 VP20, O.D. φ26
INSULATION
MATERIAL Heat insulation Foamed polystyrene/foamed polyethylene
Sound absorbing insulation 
For outdoor units Pair application See chapter RY-EAZ7/RYPB-7
• Wall Mounted Unit •R-407C •FAYP71-100BV1
2 Specifications
3
2
5
•Split - Sky Air •Indoor Units

ELECTRICAL SPECIFICATIONS
For indoor units only: FAYP71BV1 FAYP100BV1
CURRENT Nominal running
current
cooling A
heating A
For combination indoor units + outdoor units: FAYP71BV1 FAYP100BV1
RYP71BV1/W1 RYP100B7V1/W1
CURRENT Nominal running
current
cooling A
heating A
Maximum running
current
cooling A
heating A
For indoor units only: FAYP71BV1 FAYP100BV1
POWER SUPPLY V1 V1
NOMINAL
DISTRIBUTION
SYSTEM VOLTAGE
Phase 1∼1∼
Frequency Hz 50 50
Voltage V 230 230
NOTES
1 Nominal cooling capacities are based on: indoor temperature 27°CDB/19.5°CWB * outdoor temperature 35°CDB * equivalent refrigerant
piping length: 7.5m * level difference: 0m.
2 Nominal heating capacities are based on: indoor temperature: 20°CDB* outdoor temperature: 7°CDB/6°CWB * equivalent refrigerant
piping length: 7.5m * level difference: 0m.
3 Capacities are net, including a deduction for cooling (an addition for heating) for indoor fan motor heat.
4 The sound pressure level is measured via a microphone at a certain distance from the unit. It is a relative value, depending on the distance
and acoustic environment. For measuring conditions: please refer to item 6 of this chapter.
5 The sound power level is an absolute value indicating the ’’power’’ which a sound source generates.
• Wall Mounted Unit •R-407C •FAYP71-100BV1
2 Specifications
3
2
6•Split - Sky Air •Indoor Units

3 Dimensional drawings
unit (mm)
50 or more
250 or more
(Required space)
J80 hole
approx. 450
approx. 600
FAYP71B
8-5x20 Oval hole (for wood screw)
Mounting location
Detail j
A(Mounting hole for installation plate)
approx. 580
Piping direction
(Required space)
50 or more
50 or more
(Required space)
5-6x20 Oval hole (for wood screw)
13-J5 Hole (for wood screw)
2-J12 Hole (for bolt)
(piping and wiring
intake)
Note 2. (service space for air filter)
Direction for air filter draw out
1 Front grille
2 Air filter
3 Discharge outlet
4 Gas piping connection (J15.9 flare)
5 Gas piping connection (J9.5 flare)
6 Drain pipe connection (VP20 O.D.
J26)
7 Earth terminal(M4) (inside cover)
8 Slit hole for right side piping
connection
9 Slit hole for left side piping
connection
DU427-2223C
Notes:
1 Location of general rated name plate
Right side plate outside surface
2 In case of using infrared remote control,
this position will be a signal receiver. Refer
to the drawing of infrared remote control
in detail.
Brand name plate
Ceiling surface
unit (mm)
50 or more
250 or more
(Required space)
J80 hole
approx. 450
approx. 600
FAYP100B
8-5x20 Oval hole (for wood screw)
Mounting location
Detail j
A(Mounting hole for installation plate)
approx. 580
Piping direction
(Required space)
50 or more
50 or more
(Required space)
5-6x20 Oval hole (for wood screw)
13-J5 Hole (for wood screw)
2-J12 Hole (for bolt)
(piping and wiring
intake)
Note 2. (service space for air filter)
Direction for air filter draw out
1 Front grille
2 Air filter
3 Discharge outlet
4 Gas piping connection (J15.9 flare)
5 Gas piping connection (J9.5 flare)
6 Drain pipe connection (VP20 O.D.
J26)
7 Earth terminal(M4) (inside cover)
8 Slit hole for right side piping
connection
9 Slit hole for left side piping
connection
3D014381A
Notes:
1 Location of general rated name plate
Right side plate outside surface
2 In case of using infrared remote control,
this position will be a signal receiver. Refer
to the drawing of infrared remote control
in detail.
Brand name plate
Ceiling surface
• Wall Mounted Unit •R-407C •FAYP71-100BV1
3
3
7
•Split - Sky Air •Indoor Units

4 Piping diagrams
OCheck valve LFlare connection MScrew connection NFlange connection ZPinched pipe PSpinned pipe
Indoor heat exchanger
Field piping J9. 5C1220T-0
4D013899A
FAYP71-100B
Field piping JA C1220T-0
Filter
Refrigerant pipe connection port
diameters
Model A
FAYP71 J15.9
FAYP100 J19.1
To outdoor unit
Indoor unit
• Wall Mounted Unit •R-407C •FAYP71-100BV1
3
4
8•Split - Sky Air •Indoor Units