Daikin AIRHUB User manual

TOUCH CONTROLLER (Linear and On/Off system)
OPERATION MANUAL

1. Name and Function Buttons
-----------------------------------------
3
2. Main & Sub controller Menu Screen
-------------------------------
5
3. Preparation before Operation
3.1 Time and date settings--------------------------------------------
6
3.2 Dealer Contact------------------------------------------------------
7
3.3 Maintenance--------------------------------------------------------
8
3.4 Change Name-------------------------------------------------------
9
3.5 Screen Brightness-LED Bar---------------------------------------
12
3.6 Software Version---------------------------------------------------
14
3.7 Sensor Selection----------------------------------------------------
15
3.8 Sensor Priority-------------------------------------------------------
16
3.9 Touch Sound---------------------------------------------------------
18
4. Timer Operation
4.1 ON / OFF Timer-----------------------------------------------------
19
4.2 7 Days Timer---------------------------------------------------------
21
4.3 Simple 7 Days Timer----------------------------------------------- 2
3
4.4 Multi 7 Days Timer-------------------------------------------------
26
4.5 Explanation of 7 Days Timer-------------------------------------
27
4.6 Simple 7 Days / Multi 7 Days Timer -Copy Mode Setting
28
5. Energy Saving Options
5.1 Eco Settings List-----------------------------------------------------
29
5.2 Setpoint Range Set-------------------------------------------------
30
5.3 Setpoint Auto Reset------------------------------------------------
31
5.4 Auto Off Timer------------------------------------------------------
32
5.5 Holiday Mode-------------------------------------------------------
33
6. Operation Mode
-------------------------------------------------------- 3
4
7. Zone Control
------------------------------------------------------------ 3
5
8. Fan Operation
-----------------------------------------------------------
37
9. Key Lock
-------------------------------------------------------------------
38
CONTENTS

Start Up Screen
Operation Screen
Off Screen
Name and Functions of icons
3
1
2
3
4
5
6
7
8
9
11
10
12

Name and Functions of Buttons
4
1. ON/OFF Power
Touch this icon to turn the air conditioner ON and OFF
2. Timers
Touch this icon to set the timers
3. Economy options
Touch this icon to access user Economy options
5. Fan speed setting
Touch this icon to select the airflow rate
4. AIRHUB logo
Touch and hold this icon for 5 secs to lock the screen
6. Mode Selector
Touch this icon to select the AUTO / COOL / HEAT /
FAN / DRY mode
7. Master setpoint temperature
Shows main setpoint temperature
8. Master setpoint temperature UP
Touch this icon to increase Main setpoint temperature
10. Zone settings
Touch this icon to make zone setting
9. Master setpoint temperature DOWN
Touch this icon to reduce Main setpoint temperature
11. Date and Time display
Shows date and time
12. Settings menu
Touch this icon to access Settings menu screen

MAIN ControllerSUB Controller
MAIN & SUB Controller Menu Screen
5

Preparation before Operation
3.1. Time and Date Settings
(1) Tap the on Main Operation Screen to access the Menu
Screen.
(2) Tap the Setting on Menu Screen.
(3) Tap Time and Date.
(4) Tap up /down to set the date and time.
(5) Select either 24-hour time or 12-hour time.The clock on the
main screen will display your preferred setting.
(6 ) Tap the save icon.
(7) Tap to go to main operation screen.
6

Preparation before Operation
3.2. Dealer Contact
(1) Tap the on main Operation screen to access the
Menu Screen.
(2) Tap setting on Menu Screen.
(3) Tap Dealer & then tap the Insert Contact Details Here. The
keyboard will display, you can now enter the company details &
similarly the contact no.
(4) Press Enter and tap Save to update changes or press Esc to
escape from the keyboard.
(5) Tap to go back to main operation screen.
7

Preparation before Operation
3.3. Maintenance
(1) If maintenance warning message such as “Clean the filter”
appears on Main Operation Screen.
(2) Tap the on Main Operation Screen to access the Menu
Screen.
(3) Tap the Setting on Menu Screen.
(4) Tap Maintenance.
(5) Tap Clear filter change message to remove “Clean the filter”
warning message.
NOTE:Clear filter change message will display only when the
Clean the filter sign appears on the main Operation screen.
(6) Tap to go back to Main Operation Screen.
8

Preparation before Operation
3.4. Name Change –Zone Names (Only for Linear control)
(1) Tap on main Operation screen to access the Menu
Screen.
(2) Tap the Setting on Menu Screen to access the Setting
Screen.(*The settings menu screen for On/Off control is
different from that of Linear control.)
(3) Tap Change Name icon to edit Zone names.
(4) Select the desired Zone number you wish to add aname.
(5) Enter the preferred name for the Zone.
(*There are limitations for the number of characters and the
type of characters.Number of characters:Maximum 12 and
Type of characters:A-Z, a-z, 0-9, ‘ and “Blank”.)
(6) Repeat this procedure for all desired Zones.
(7) Tap Save icon to update changes.
(8) Tap to go back to main Operation screen.
9
Note: Your system is Linear Control if your main screen indicates OptiZone on the fan icon.

Preparation before Operation
3.4. Name Change –Zone & sensor Names (Only for On/Off control)
(1) Tap on main Operation screen to access the Menu Screen.
(2) Tap the Setting on Menu Screen to access the Setting Screen.
(3) Tap the Change Name icon to edit Zone names.
(4) Select the desired Zone number you wish to name.
(5) Enter the preferred name for the Zone.
(6) Repeat this procedure for all desired Zones.
(7) Tap Save icon to update changes.
(8) Tap to go back to main Operation screen.
10
Note: Your system is On/Off Control if your main screen DOES NOT indicate OptiZone on the fan icon.

Preparation before Operation
3.4. Zone Names Synchronization (Only *Airbase Users)
To Synchronize the Main or Main &Sub controller Zone name
with Airbase:
(1) Tap on main Operation screen to access the Menu
Screen from main controller.
(2) Tap the Setting on Menu Screen to access the Setting
Screen.(*The settings menu screen for On/Off control is
different from that of Linear control.)
(3) Tap the Change Name icon to edit Zone names.
(4) Tap Save icon to update changes, this will automatically
synchronize the AirHub zone names with Airbase.
(5) Tap to go back to main Operation screen.
11
Note: Above steps requires if only you change zone names by your *Airbase app.

Screen Brightness-LED Bar
3.5. Screen Brightness
(1) Tap on main Operation screen.
(2) Tap the Setting on Menu Screen.
(3) Tap Screen Brightness.
(4) Tap the ON/OFF icon to activate the Screen Brightness
settings.
(5) Tap The Start time and set the time when the backlight
begins using Brightness 1percentage setting.Similarly set the
Stop time for when the backlight stops using this setting and
reverts to the Brightness 2percentage setting.
(6) (Stop time increases the screen light intensity during the day
using the Brightness 2setting)
Both Brightness percentage settings are adjustable by the
up/down arrows.
(7) Tap “Screen Timeout” icon to set adelay time for turning
the backlight off (No display).
(8) Tap “Save” icon to save the changes.
(9) Tap to go back to Main Operation Screen.
12
***NOTE:While Screen Brightness is enabled, the backlight will be at the value of Brightness 1during
the set period, otherwise it will be at the value of Brightness 2. If Screen Brightness is disabled, then
the backlight will operate at 100%at all times.

Screen Brightness-LED Bar
3.5. LED Bar
13
***NOTE:In relation to the LED Bar.The LED Bar will always be
active regardless of AC operation status.The LED Bar is inactivated
only when the screen sleeps (Screen Timeout:default 2min).
Upon touching an inactive screen, the screen will activate, a
subsequent touch will activate the LED Bar.
LED Bar

Preparation before Operation
3.6. Software version
(1) Tap the on main Operation screen to access the Menu
Screen.
(2) Tap Setting on Menu Screen.
(3) Tap the Software version icon to go to software version screen.
(4) Interface PCB and Tablet software version are shown on the
screen.
(5) Tap to go back to main Operation screen.
14

Preparation before Operation
3.7. Sensor Selection (Only for On/Off control)
(1) Tap the on main Operation screen to access the
Settings Menu.
(2) Tap the “Setting” on Menu Screen.
(3) Tap the Sensor selection icon.
(4) Select appropriate sensor or tap “AUTO SELECT”.Auto select
will automatically choose atemperature sensor based on the
activated zone(s) &priority level.(Refer to the next page)
(5) Tap Save to save the selection.
(6) Tap to go back to main Operation screen.
Sensor Selection (Only for Linear control)
Sensor Selection setting is not available for Linear control.Each
individual zone is already linked to its own sensor during
installer commissioning.For further details see installation
manual.
15
Note:
Indoor Sensor is located within the indoor unit.Sensor 1, Sensor 2are optional remote
wall sensors to be installed as per the remote sensor installation manual.

Sensor Priority
3.8. Sensor Priority (Only On/Off system)
(1) Tap on main Operation screen.
(2) Tap Setting on Menu Screen.
(3 ) Tap “Sensor priority” on settings screen.
(4) Tap “Priority 1” & select the temperature sensor to be
assigned as 1st priority.Follow the same process for “Priority 2”
and “Priority 3”.
Priority 1sensor will have full temperature control of the
system whenever apriority 1zone is switched On.Priority 2
sensor will only control the system when all Priority 1zones are
switched Off.Likewise, Priority 3sensor will only control the
system if all Priority 1&2zones are switched Off.
(5) Tap “Save” icon to save the priorities.
16
Note:
Indoor Sensor is located within the indoor unit.Sensor 1, Sensor 2are optional remote
wall sensors to be installed as per the remote sensor installation manual.

Sensor Priority
3.8. Sensor Priority (Only On/Off system)
(6) Tap Priority 1 sensor’s name & then Go to Zone> allocate a
zone or batch of zones to Priority 1 by highlighting.
(7) Tap Save to save the setting.
(8) Tap “<Back” to go back to sensor priority screen.
(9) Follow the same method for Priority 2 & Priority 3 sensors
(10) Tap to go back to settings screen.
17

Touch sound
1818
3.9. Touch sound
(1) Tap icon to access the Menu Screen.
(2) Tap setting on Menu Screen to access the setting menu.
(3) Tap Touch Sound on setting menu to access the Touch Sound screen.
(4) Slide the toggle switch to “ON” position to turn on the sound.
(5) Or Slide the toggle switch to “OFF” position to turn off the sound.
(6) Tap SAVE to save changes.
(7) Tap to exit from this screen.

Timer Operation
4.1. On/Off Timer
(1) Tap to access Menu Screen.
(2) Tap Timer on Main/Menu Screen.
*If the clock has not been set, it will revert to the Clock
Setting screen.
(3) Tap On/Off timer.
(4) Toggle the “On” or “Off” timer switch to enable or
disable.
(5) Tap up/down to set how many hours you wish the unit to
start
(6) Use the same method to set the Off timer.The unit will
switch from On to Off in the set hours.
(6) Tap Save icon to save the changes.
(7) Tap to go to Main Operation screen.
(8) TIMER icon will update if any timers are active.
19
*If clock has not been set, it goes to clock
setting screen.
*If clock has not been set, it goes to clock
setting screen.

Timer Operation
To combine On timer and Off timer
A sample setting for combining the two timers is shown below.
Example
On timer set for 1 hour
Off timer set for 3 hours
0h 1h 2h 3h 4h
ON
Set timer
Unit not in operation
Unit switch ON
(Settings enabled)
Unit in operation
(Settings disabled)
Unit switches OFF
(Settings enabled)
Unit not in operation
(Settings disabled)
Timer Operation
20