Dallmeier Ddf51 hdv-dn-sm series Guide

006832 / 1.0.2 / 2018-12-19

DDF51(X)0HDV-DN

Commissioning

English

The reproducon, distribuon and ulizaon of this document as well as the communicaon of its contents to

others without express authorizaon is prohibited. Oenders will be held liable for the payment of damages.

The manufacturer accepts no liability for damage to property or pecuniary damages arising due to minor

defects of the product or documentaon, e.g. print or spelling errors, and for those not caused by intenon or

gross negligence of the manufacturer.

Figures in this document may dier from the actual product.

We reserve the right to make technical modicaons.

All trademarks idened by ® are registered trademarks of Dallmeier electronic.

All trademarks idened by *) are trademarks or registered trademarks of the following owners:

Google and Google Chrome of Google Inc. headquartered in Mountain View, California, USA;

JavaScript of Oracle Corporaon (and/or its aliates) headquartered in Redwood Shores, California, USA;

microSDXC of SD-3C, LLC headquartered in North Hollywood, California, USA;

Microso, Internet Explorer, Microso Edge and Windows of Microso Corporaon headquartered in

Redmond, Washington, USA;

Mozilla and Firefox of Mozilla Foundaon headquartered in Mountain View, California, USA;

Torx of Acument Intellectual Properes, LLC headquartered in Rockford, Illinois, USA;

Phillips of Phillips Screw Company headquartered in Burlington, Massachuses, USA.

Third-party trademarks are named for informaon purposes only.

Dallmeier electronic respects the intellectual property of third pares and always aempts to ensure the

complete idencaon of third-party trademarks and indicaon of the respecve holder of rights.

In case that protected rights are not indicated separately, this circumstance is no reason to assume that the

respecve trademark is unprotected.

This product includes soware developed by the OpenSSL Project for use in the OpenSSL Toolkit

(hp://www.openssl.org) and cryptographic soware wrien by Eric Young (eay@cryptso.com).

Commissioning DDF51(X)0HDV-DN-SM

Contents

1 Validity 4

2 Documents 4

This Document 5

Other Applicable Documents

Data Sheet

The product data sheet contains detailed technical specicaons, features and

characteriscs of the device.

The target audience of the document is trained system integrators (video security/

surveillance systems installaon contractors).

Conguraon

The document entled “Conguraon” contains detailed informaon concerning

the conguraon of the device.

The target audience of the document is trained system integrators (video security/

surveillance systems installaon contractors).

DDF51(X)0HDV-DN-SM Commissioning

3 TypographicalConvenons

This document may contain various warning words and symbols that indicate

potenal sources of danger:

DANGER

DANGER indicates a hazardous situaon which, if not avoided,

will result in death or serious injury.

WARNING

WARNING indicates a hazardous situaon which, if not avoided,

could result in death or serious injury.

CAUTION

CAUTION indicates a hazardous situaon which, if not avoided,

could result in minor or moderate injury.

NOTICE

NOTICE addresses pracces not related to physical injury, such as

device and/or property damage due to faulty operaons or incor-

rect conguraons.

Commissioning DDF51(X)0HDV-DN-SM

For reasons of clarity and readability, various text formang elements and types

of emphasis are used in this documentaon:

Instrucons are indicated by arrows (➡).

➡Always carry out instrucons one aer the other in the sequence described.

“Expressions” in quotaon marks usually refer to individual components of the

device (housing parts, mounng elements, connecons/interfaces, etc.) or to

control elements of the device’s web-based graphical user interface (menu items,

buons, etc.).

Paragraphs in italics provide informaon on basic principles, special features

and ecient procedure as well as general recommendaons.

DDF51(X)0HDV-DN-SM Commissioning

4 SafetyInstrucons

Only use the device if it is technically in proper working condion and for the

intended purpose while keeping safety and potenal dangers in mind.

• QualiedPersonnel

The assembly, installaon, connecon, commissioning and conguraon of the

device may only be carried out by qualied personnel.

This also applies to the maintenance, inspecon and repair of the device in

complying with the regulaons of the DIN VDE 0701-0702 series of standards

(VDE 0701-0702: “Inspecon aer repair, modicaon of electrical appliances

– Periodic inspecon on electrical appliances – General requirements for

electrical safety”).

• Regulaons

The use of video and audio surveillance systems is, in general, strictly regu-

lated. Inform yourself about the currently valid laws and regulaons regarding

data, worker and environmental protecon before using the device and ensure

compliance with them.

• System Components

Only use internal components that have been tested and approved by Dallmeier.

Inappropriate internal components may cause malfuncons, damages and data

loss and may result in the loss of warranty.

Commissioning DDF51(X)0HDV-DN-SM

• Modicaons

Do not make any modicaons to the hardware or soware that have not been

tested and approved by Dallmeier.

Inappropriate modicaons may cause malfuncons, damages and data loss

and may result in the loss of warranty.

• Documentaon

The product documentaon for the device contains several documents which

are included in the scope of delivery in a printed form and/or on a digital me-

dium. Addional informaon, if available, is provided exclusively on the website

www.dallmeier.com.

Read the complete product documentaon for the device carefully and thor-

oughly before using the device. Always follow the contained instrucons, notes

and warnings and observe the technical specicaons in the currently valid

product data sheet.

Keep all documents in legible condion and in a suitable locaon for future

reference.

Regularly check the website www.dallmeier.com for the latest product docu-

mentaon updates.

• CondensaonWater

If the device is brought from a cold to a warm environment, resulng condensa-

on water may cause malfuncons and damages.

In this case, wait (up to 8 hours) unl the device has reached room temperature

before commissioning.

DDF51(X)0HDV-DN-SM Commissioning

• Earthing&EquipotenalBonding

For the safety of persons (protecon against dangerous contact voltages)

and devices (protecon against over-voltages) as well as for the immunity of

informaon and communicaon technology equipment to electromagnec in-

terferences (EMI), all protecve measures, which are specied by the currently

applicable DIN, VDE and ISO standards and which provide for a standard-com-

pliant grounding/earthing and a correct equipotenal bonding of electrical and

electronic devices, are mandatory and must be fullled by all means.

• LightningStorms

To avoid damage to the device by electrical surge during lightning storms, all

protecve measures, which are specied by the currently applicable DIN, VDE

and ISO standards and which provide for a standard-compliant lightning protec-

on equipotenal bonding, are mandatory and must be fullled by all means.

• OperangCondions

Unfavorable operang condions may shorten the lifeme of the device and

may cause malfuncons, damages and data loss and may result in the loss of

warranty.

Observe the specicaons given in the technical data, the operang condion

requirements and the maintenance instrucons.

• Foreign Bodies

If objects or liquids get into the device, immediately disconnect it from the

power supply (pull out the power plug or disconnect the device from the PoE

enabled PSE port).

Contact the sales partner responsible for your area.

Commissioning DDF51(X)0HDV-DN-SM

• Burnt Smell

If you noce burnt smell or a formaon of smoke coming from the device,

immediately disconnect it from the power supply (pull out the power plug or

disconnect the device from the PoE enabled PSE port).

Contact the sales partner responsible for your area.

• Opening

The device may only be opened by qualied personnel for commissioning,

inspecon, maintenance and repair.

• Disposal

Do not dispose waste electrical and electronic equipment into the household

trash.

Disconnect the device from the power supply.

Remove all connected devices.

Return the device to the sales partner responsible for your area.

DDF51(X)0HDV-DN-SM Commissioning

5 General Notes

Scope of Delivery

The standard scope of delivery includes:

• Security Torx*) L-wrench with hollow point (T20 H) for

tamper-resistant housing screws (Torx-TR 20)

• Circular rubber gasket (adhesive-backed) for an opmum ghtness between the

mounted housing base and the supporng structure (ceiling or wall)

• PG16 cable gland with standard sealing insert and

sealing ring on connecon thread

• Sealing insert with longitudinal cut for easy inseron of pre-assembled cables

• Three mounng screws (incl. O-rings) and three plasc screw anchors for

mounng the housing base

• Three spare O-rings for mounng screws

• Drilling template (published in print and on DVD-ROM)

• Product documentaon (published in print and/or on DVD-ROM)

The scope of delivery may dier depending on the ordered equipment, device

variant or country of desnaon.

Commissioning DDF51(X)0HDV-DN-SM

TransportaonandPackaging

Store the original packaging for later transportaon.

Dallmeier is not responsible for any damage resulng from unprofessional or

improper transportaon.

The device should only be shipped in the original packaging.

If the original packaging is no longer available, ensure that the used packaging suf-

ciently protects the device against damage, moisture, heat and cold.

Warranty

The terms and condions valid at the me the contract was signed shall apply.

DDF51(X)0HDV-DN-SM Commissioning

AppropriateUse

The DDF51(X)0HDV-DN-SM (surface mount variant) is a HD network camera that is

built into a vandal-resistant (IK10) dome enclosure.

The device is primarily designed for indoor surface mount installaons on

ceilings and walls and can be operated with Power over Ethernet (PoE, Class 0,

IEEE 802.3af) or oponally powered by an external 12 V DC power supply unit

(only if the device is equipped ex factory with the “Interface Board Series 5100”).

NOTICE

Damagetothedevicecausedbyimproperinstallaoninoutdoor

environments

The device is primarily designed for indoor use.

The installaon of the device in outdoor environments may result

in malfuncon, damage, data loss and loss of warranty and is not

permied unless the following requirements/instrucons are

complied with:

➡Use the oponally available Dallmeier outdoor wall mount

bracket if you want to install the device in outdoor environ-

ments (for more informaon, contact the sales partner respon-

sible for your area or visit www.dallmeier.com).

Commissioning DDF51(X)0HDV-DN-SM

Operaon

• If the device is powered by an external DC power supply unit (i.e. is not operated

with Power over Ethernet), interference caused by a ground loop may occur

in the analog video preview signal. In this case, use a video signal transformer

(balun) for galvanic (ground) isolaon between the signal source (this camera)

and the RG-59 cable.

• In order to prevent damage to the device, a galvanic isolator (balun) must be

installed if the BNC interface is permanently in use.

• If the device or the cables connected to the device are located near sources

with strong radiaon, the video image may be distorted.

• The device is equipped with Automac Gain Control (AGC). In low-light condi-

ons the image may be altered (e.g. noise). This is not a malfuncon.

• The quality of the video image depends on the lighng condions and the used

monitor.

• The accuracy of the Automac White Balance (AWB) algorithm depends on the

used lighng. Mixed light (consisng of arcial light and daylight) may cause

color distorons (inaccurate color reproducon).

• Poor lighng can lead to an incorrect white balance.

DDF51(X)0HDV-DN-SM Commissioning

Approvals/Cercaons

The following approvals/cercaons were valid for the device at the me of this

document’s compilaon:

• CE, FCC, RCM, UL, DIN 50130-4 compliant

Visit www.dallmeier.com for possible updates.

Note(USA)

This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protecon against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instrucon manual, may cause harmful interfer-

ence to radio communicaons. Operaon of this equipment in a residenal area is likely to

cause harmful interference in which case the user will be required to correct the interference

at his own expense.

Commissioning DDF51(X)0HDV-DN-SM

6 Requirements

AmbientCondions

The device is primarily designed for indoor use and may only be used outdoors in

conjuncon with the oponally available Dallmeier outdoor wall mount bracket

(for more informaon, contact the sales partner responsible for your area or visit

www.dallmeier.com).

NOTICE

Damagetothedeviceduetounfavorableambientcondions

Unfavorable local condions may shorten the lifeme of the device

and may cause malfuncons or damages.

➡Do not install/operate the device in places

• with a large amount of dust and dirt,

• with steam or oil vapors (e.g. kitchen),

• with direct sunlight,

• with strong heat emissions (e.g. radiator),

• with improper ambient temperatures,

• near sources with strong radiaon (e.g. radio transmiers,

magnec elds),

• with corrosive surroundings (e.g. gases, salt water),

• with insucient air venlaon (e.g. closed cabinet).

DDF51(X)0HDV-DN-SM Commissioning

Power Supply

The device is by default operated with Power over Ethernet (PoE, Class 0) and is

compable with all Power Sourcing Equipment (PSE) that is compliant with the

IEEE 802.3af PoE standard.

Oponally, the device can also be powered by an external 12 V DC power supply

unit if the device is equipped ex factory with the “Interface Board Series 5100”.

WARNING

Electricalshockcausedbyexposedelectricalpartsandduetothe

lackoforimpropergrounding/earthing

Risk of death or serious injury

➡The installaon of the device and the connecon of peripheral

equipment may only be carried out by qualied personnel and

in a voltage-free state.

➡Before connecng or disconnecng an external DC power sup-

ply unit, make sure that the power supply unit is disconnected

from the mains socket (pull the power plug out of the socket).

➡Carry out all protecve measures for a standard-compliant

grounding/earthing of the device in accordance with the cur-

rently applicable DIN, VDE and ISO standards in order to ensure

the safety of persons (protecon against dangerous contact

voltages).

Commissioning DDF51(X)0HDV-DN-SM

NOTICE

Damage to the device due to improper power supply

Damage to electronic components or serious malfuncons

➡Always ensure the correct polarity when connecng an external

DC power supply unit.

➡Do not operate the device with Power over Ethernet (PoE) if the

device is powered by an external DC power supply unit.

Damagetothedeviceormalfunconsduetothelackoforim-

proper grounding/earthing

Damage to electronic components caused by lightning strikes and

over-voltages (electrical surges) or malfuncons due to electro-

magnec interferences

➡Carry out all protecve measures for a standard-compliant

grounding/earthing and a correct equipotenal bonding of the

device in accordance with the currently applicable DIN, VDE and

ISO standards in order to ensure the safety of the device (pro-

tecon against over-voltages) and its immunity to electromag-

nec interferences (EMI).

DDF51(X)0HDV-DN-SM Commissioning

NOTICE

DamagetothecontactsoftheRJ45connectorswhenun-mang

thejack-plugconneconunderPoEload

Un-mang the jack-plug connecon while transming PoE power

causes erosion and ping by electrical arcs on both the jack and

plug contacts (especially when repeatedly un-mang the jack-plug

connecon under PoE load). Electrical arcs are generated, since the

electric potenal dierence (voltage) and therefore the intensity

of the electric eld between the contacts rises sharply when un-

mang the jack-plug connecon.

The more un-mang cycles are carried out under PoE load, the

higher the loss of contact material due to metal evaporaon by

electrical arcs, which in turn accelerates the material erosion pro-

cess on the contact surfaces.

Damaged contacts with an increased contact resistance may lead

to a reduced data transfer rate, unreliable network connecvity or

even total device failure.

➡Always disable PoE on the relevant port of your PoE switch (or

PoE midspan device) or disconnect the used single-port PoE

injector from the power supply before un-mang the jack-plug

connecon in order to prevent damage to the contacts of the

RJ45 connectors by contact erosion.

This manual suits for next models

Table of contents

Other dallmeier IP Camera manuals

dallmeier

dallmeier DDZ5000HD-DN/IR Series Guide

dallmeier

dallmeier DF4 20HD-DN/IR Series Guide

dallmeier

dallmeier DDF5 50HDV-DN-IM Series Guide

dallmeier

dallmeier DDF4820HDV-DN-IM Guide

dallmeier

dallmeier DDF4900HDV Series Operating and maintenance instructions

dallmeier

dallmeier DF5400HD-DN/IR Guide

dallmeier

dallmeier DF3000IP Operating and maintenance instructions

dallmeier

dallmeier DF5 00HD-DN/IR Series User manual

dallmeier

dallmeier DF5250HD-DN/IR Guide

dallmeier

dallmeier PANOMERA S4 Guide

dallmeier

dallmeier DF4820HD-DN Guide

dallmeier

dallmeier DF5200HD-DN/IR Guide

Popular IP Camera manuals by other brands

Interlogix

Interlogix TruVision TVF-5201 Configuration manual

Linux

Linux Skypecam series user manual

Foscam

Foscam FI9818W user manual

Shenzhen

Shenzhen ip607 user manual

DynDNS

DynDNS DDK-1500 Installation & operation manual

Bosch

Bosch MIC-7130 Quick installation guide

Santec

Santec SNC-6312IRH Quick installation guide

Foscam

Foscam FI9821EP Quick installation guide

Okina USA

Okina USA SIR24X-348AIDN-VD Operational manual

Zetronix

Zetronix BlueLine Police Body Camera manual

Telecom Behnke

Telecom Behnke 20-2940-IP instructions

Logipix

Logipix LOBJ-05P installation guide

GRASS VALLEY

GRASS VALLEY LDX 86 HS/XS + XF Fiber Adapter user guide

Phoenix Contact

Phoenix Contact SCX 4POE 2LX user manual

Samsung

Samsung SNB-7000 user manual

Watcher

Watcher XL Series Installation and setup guide

Planet Networking & Communication

Planet Networking & Communication ica-107w Quick installation guide

AirLinkWiFi

AirLinkWiFi MyiHome AirLink WiFi H.264 user manual

dallmeier DDF51 HDV-DN-SM Series Guide

Popular IP Camera manuals by other brands