danalock V3 EURO Expert Instruction sheet

a
The adjustable
cylinder as it is
in the box
b
3. Adjust the new cylinder
Measure from
center of screwhole
Back part
=
Fits min. 35 mm
7 space piece
7+7
=
Fits min. 40 mm
10 +10
=
10 space piece
Fits min. 45 mm
+15
=
15
15 space piece
Fits min. 50 mm
+22
22 =
22 space piece
Fits min. 55 mm
+25
25 =
25 space piece
Fits min. 60 mm
32 space piece
32 +32
=
Fits min. 65 mm
32
+7
7
1. Remove the old door lock
Remove your current cylinder. Start
with removing the rosettes and the
screws on both sides of the door.
(a) Save the screw with the threaded
tube part for later use.
Remember to unscrew the lock-
screw in the mortise-plate on the
side of the door. (b)
Insert your key and turn it so the
cam lines up with the body of the
cylinder and pull it out.(c)
Measure the back part of
the old cylinder from the
middle of the screwhole
and away (see illustration).
In the Danalock box
you’ll find an adjustable
lock cylinder.
4. Just unscrew
the small screws
on both sides of
the part you want
to remove and pull
the cylinder apart.
5. Insert new brass
tube and spacer piece
6. Assemble the cylinder and
screw the tiny screws back in.
When you remove one or
more parts of the cylinder
you’ll have to exchange the
brass tube in the center with
another that fits the new
measurements.
here is the different
combinations.
7. Size guide
Remove too big
spacer piece
and brass tube
Please look at the size
guide to the right to find
the length for the spacer
piece and brass tube.
+32
32
cam
a
c
Tools needed
To mount the Danalock
you need a Philips
screwdriver and two
pliers or a wire cutter.
Parts involved on
your existing lock
Mortise plate
Lock screw
Rosette plate
Cylinder
Back plate
Adjustable
cylinder
Cylinder
brass tubes
Rosette spacers
Tailpiece
adapter
Breakable screws
Contents of the
Danalock box
you’ll need for
the easy install
Small screwdriver
Rosette screw
and treaded tube
Danalock V3 EURO Expert install for rosette doors page 1/3

8. Insert the new cylinder
Insert the new cylinder, and
re-insert the lock-screw in
the mortisse-plate. (b)
Click!
b
12. Mounting the back
plate on the door
Insert the screw that originally
held the lock on top of the
rosette plate on the front of
the door, and insert the
threaded tube that
matched it.
16. Attach the tailpiece adaptor
Choose the right tailpiece adaptor
from the Danalock box.
The green tailpiece adaptor
is designed to match the
adjustable cylinder.
Insert the tailpiece adaptor,
in the center tube on the
backside of the Danalock.
Press on the adaptor
until a click ensures
it is fixed firmly to
the Danalock.
threaded
tube
13. Insert the
second screw
Now insert the long
screw from the box
on the inside of the
door and
insert the
threaded tube from
the box on the
outside.
15. Give the tailpiece
the right length
To avoid damaging the danalock
you will have to shorten the new
cylinder tailpiece to max. 35 mm
from the door surface.
Use two pliers or a wire cutter
to shorten the tailpiece.
Danalock V3 EURO Expert install for rosette doors page 2/3
Rosette plate on the
front side of the door
max.
35 mm
Fit the Danalock over
the back plate.
Make sure the
tailpiece hits the
slide in the middle
of the adaptor.
17. Fit the tailpiece to the middle of the housing base
Find the small marking on
the edge of the backplate
and align the mark on the
back of the Danalock
baseplate with it.
Now you are sure to hit
the notches on the
backplate with the
Danalock.
18. Align the platemarks
Turn the Danalock
clockwise until it clicks
to fasten it to the back
plate.
NOTE: If you need to
unfasten and retry, see
“Uninstall instructions”
at the end of the
manual.
19. Fasten the Danalock
Click!

Go to Google Play or App Store
and download the Danalock App.
When the app is installed you
create a user profile by pressing the
blue ring. You will use this profile
each time you sign into the app.
Next you need to press ”Menu”
in the top right corner, and the
press ”Add lock”.
A guide will now lead you through
the installation and configuration
of your Danalock.
22. Download the Danalock App
Your Danalock is now attached to
the door. Download and open the
Danalock app to finish setting it up.
Leave the door open, so the lock
isn’t influenced when calibrated.
Next you need to press ”Menu”
in the top right corner, and the
press ”Add lock”.
A guide will now lead you through
the installation and configuration
of your Danalock.
23. Add the lock in the app
Pull out the plastic tab
to activate the batteries.
A light will flash to
confirm the Danalock
is ready.
20. Activate batteries 21. Before downloading the app
Note: If the batteries are
disconnected, you will have to
re-calibrate the Danalock.
If at any time you need to dismount
the Danalock from your door, insert
a pen tip into the hole at the top
inner edge of the lock and press
while turning the lock
counter-clockwise until the lock
releases.
This will not reset the lock or
disconnect it from your account,
but the lock may need to be
re-calibrated if fastened to your
door again.
23. Dismount instructions
Danalock V3 EURO Expert install for rosette doors page 3/3