Datalogic Smart-VS WebApp User manual

Smart-VS WebApp
USER’S GUIDE
Smart Vision Sensor

Datalogic S.r.l.
Via S. Vitalino, 13
40012 Calderara di Reno (BO)
Italy
Tel. [phone]
Fax [phone]
This manual refers to software version 1.0.1 and later.
© 2020 Datalogic S.p.A. and /or its affiliates
All rights reserved. Without limiting the rights under copyright, no part of this documentation may be repro-
duced, stored in or introduced into a retrieval system, or transmitted in any form or by any means, or for any
purpose, without the express written permission of Datalogic S.p.A. and/or its affiliates.
Owners of Datalogic products are hereby granted a non-exclusive, revocable license to reproduce and
transmit this documentation for the purchaser's own internal business purposes. Purchaser shall not
remove or alter any proprietary notices, including copyright notices, contained in this documentation and
shall ensure that all notices appear on any reproductions of the documentation.
Electronic versions of this document may be downloaded from the Datalogic website (www.datalogic.com).
If you visit our website and would like to make comments or suggestions about this or other Datalogic pub-
lications, please let us know via the "Contact" page.
Disclaimer
Datalogic has taken reasonable measures to provide information in this manual that is complete and accu-
rate, however, Datalogic shall not be liable for technical or editorial errors or omissions contained herein,
nor for incidental or consequential damages resulting from the use of this material. Datalogic reserves the
right to change any specification at any time without prior notice.
Trademarks
Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries, including
the U.S.A. and the E.U.
Patents
See www.patents.datalogic.com for patent list.

USER’S GUIDE iii
CONTENTS
SMART-VS WEBAPP...................................................................................................1
Teaching .......................................................................................................................... 2
Step 1: Image Setup ............................................................................................................................2
Step 2: Acquire GOOD .........................................................................................................................3
Step 3: Acquire NO GOOD ...................................................................................................................4
Step 4: Learn .......................................................................................................................................4
Monitoring ....................................................................................................................... 5
Settings ...........................................................................................................................7
Utilities ........................................................................................................................... 8

iv SMART-VS

USER’S GUIDE 1
Smart-VS WebApp
Before using a Smart-VS device, a Teaching procedure must be performed. Teaching can
be completed either using the embedded HMI (refer to the Smart-VS Quick Reference
Guide) or the Smart-VS WebApp graphic user interface.
NOTE
To access the Smart-VS WebApp, connect to the device IP address 192.168.3.100 via
Ethernet.
In case of a new device, the user is automatically redirected to the Teaching Wizard.
In case of an already trained device, the Monitoring page is displayed.
A Settings page is also available to adjust the device settings.
Device information and the software update feature are available on the Utilities page.
To access the Smart-VS WebApp, Google Chrome is the recommended
Internet browser.

SMART-VS WEBAPP
2 SMART-VS
TEACHING
To perform Teaching on your Smart-VS device, enter a job name, select the bank where
to store it, click on the Create Job button, and follow the procedure described below.
Step 1: Image Setup
On the Image Setup page, select Start Automatic Setup to automatically set the Focus
Distance, the Exposure Time, and the Sensor Gain parameters (suggested). Alternatively,
select Advanced Image Settings to manually set the parameters.
It is also possible to move the Field of View based on the application needs, which can
be useful when objects of different batch formats must be inspected on the same line.
To do this, simply click on the image and drag it throughout the gray area.
After completing image setup, click NEXT.

TEACHING
USER’S GUIDE 3
Step 2: Acquire GOOD
On the Acquire GOOD page, one or more GOOD objects can be acquired by clicking on
the Teach button. It is recommended to acquire as many GOOD images as the known
number of instances to be treated as GOOD.
NOTE
NOTE
After adding at least one object, you can click Next and go to the Acquire NO GOOD
page.
A maximum of 6 images can be stored in both GOOD and NO GOOD boxes.
Click on an acquired object in the GOOD box and select DELETE to delete it.

SMART-VS WEBAPP
4 SMART-VS
Step 3: Acquire NO GOOD
On the Acquire NO GOOD page, one or more NO GOOD objects can be acquired by
clicking on the Teach button.
It is recommended to acquire as many NO GOOD images as the known number of
instances to be treated as NO GOOD.
NOTE
NOTE
After adding at least one NO GOOD object, you can click on the Teach button.
Step 4: Learn
This step is completed automatically.
Once the device is trained, the Smart-VS WebApp switches to the Monitoring page.
A maximum of 6 images can be stored in both GOOD and NO GOOD boxes.
Click on an acquired object in the NO GOOD box and select DELETE to delete
it.

MONITORING
USER’S GUIDE 5
MONITORING
The Monitoring page is divided into an upper bar, a main area, and a bottom bar.
The upper bar contains the job name to the left. Use the drop-down menu to switch to
another job (if present).
NOTE
Next to the job name, the following icons are present:
Upload job: uploads a job from your PC (.svscfg file)
Download job: downloads the current job on your PC
Add new job: switches to the Training wizard to create a new job
Delete job: deletes current job
The main area includes:
• the GOOD and NO GOOD boxes to the left;
• the cropping area at the center;
• the statistics box to the right. This shows the statistics concerning the ongoing
acquisitions.
The bottom bar displays an archive of acquisitions (filmstrip).
NOTE
If you want the selected job to be the running and startup job, click on the
Play button before leaving the page.
ICON DESCRIPTION
When the device receives no trigger event, the Monitoring page only dis-
plays the statistics box to the right and a blank filmstrip.

SMART-VS WEBAPP
6 SMART-VS
To start acquiring objects, two options are available:
Save and Play with External Trigger
Play with Self-Trigger
The Play button is also a Save button: click on it before leaving the page to store any
change.
NOTE
Next to the Play icons, the acquisition results are displayed as green bars for GOOD
objects, red bars for NO GOOD objects, and gray bars for OVERRUN1occurrences.
Click on the Pause icon to stop acquisition and enable all available functions.
Dragging the gray box along the bottom bar displays the acquisitions included in that
interval. You can now perform Incremental Training: click on an acquired image and
select GOOD or NO GOOD to add it to the corresponding acquisition box. It is also possi-
ble to drag and drop acquired images to the GOOD / NO GOOD box or from the GOOD
box to the NO GOOD box and vice versa.
After clicking on one of the Play icons, the newly added acquisitions will be used by the
device in addition to those stored during the initial Teaching procedure.
Furthermore, the Smart-VS WebApp allows image saving. Any image shown in the
WebApp can be saved clicking on it and selecting Save.
NOTE
The following options are also available:
Show all images or just one category
between GOOD, NO GOOD, and OVERRUN
Download the entire filmstrip
NOTE
The Play with Self-Trigger button is not an actual operating mode (output
signals are not driven). It is only intended for demonstration purposes or
preliminary checks in static condition.
1. Overrun occurrences are mostly due to a noisy trigger signal and/or a too fast sequence of
trigger events (e.g. more than two events every 50 ms). Choose a proper Debounce filter time
and/or adjust the line speed to have 20 pieces per second.
It is recommended to enable the browser option “Ask where to save each
file before downloading”.
Selecting the option “Download the entire filmstrip” downloads the last 50
acquisitions.