Datalogic Jade X7 User manual

Jade™ X7
Portal Scanner
Quick Reference Guide

Datalogic USA, Inc.
959 Terry Street
Eugene, OR 97402
USA
Telephone: [phone]
Fax: [phone]
©2015-2017 Datalogic S.p.A. and/or its affiliates
An Unpublished Work - All rights reserved. No part of the contents of this documentation
or the procedures described therein may be reproduced or transmitted in any form or by
any means without prior written permission of Datalogic S.p.A. and/or its affiliates ("Data-
logic" or "Datalogic USA, Inc.”). Owners of Datalogic products are hereby granted a non-
exclusive, revocable license to reproduce and transmit this documentation for the pur-
chaser's own internal business purposes. Purchaser shall not remove or alter any propri-
etary notices, including copyright notices, contained in this documentation and shall
ensure that all notices appear on any reproductions of the documentation.
Should future revisions of this manual be published, you can acquire printed versions by
contacting your Datalogic representative. Electronic versions may either be downloadable
from the Datalogic website (www.datalogic.com) or provided on appropriate media. If you
visit our website and would like to make comments or suggestions about this or other
Datalogic publications, please let us know via the "Contact Datalogic" page.
Disclaimer
Datalogic has taken reasonable measures to provide information in this manual that is
complete and accurate, however, Datalogic reserves the right to change any specification
at any time without prior notice.
Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many
countries, including the U.S. and the E.U. All other brand and product names may be trade-
marks of their respective owners.
Jade is a trademark of Datalogic S.p.A. or of Datalogic Group companies, registered in many
countries, including the U.S. and the E.U.
Patents
See www.patents.datalogic.com for patent list.
See the Regulatory Addendum included with your
product for additional regulatory, safety and legal
information.

Quick Reference Guide i
Table of Contents
JADE™ X7................................................................................................................................................... 1
Introduction ....................................................................................................................................................1
Box Contents ............................................................................................................................................1
Scanner Features .....................................................................................................................................2
Operation .........................................................................................................................................................3
Power-on ..................................................................................................................................................3
Scanning ...................................................................................................................................................4
Control Panel ............................................................................................................................................4
Maintenance ...................................................................................................................................................5
Cleaning ....................................................................................................................................................5
Spillage ......................................................................................................................................................6
Debris Tray/Window ........................................................................................................................6
LED and Audio Indicators ..............................................................................................................................7
Arch Indicators .........................................................................................................................................7
Audio Indicators .......................................................................................................................................8
Datalogic USA, Inc. Limited Factory Warranty ............................................................................................9

Contents
ii Jade™ X7 Portal Scanner
NOTES

Quick Reference Guide 1
Jade™ X7
Introduction
This Quick Reference Manual explains the basic features and functions of the portal scanner.
NOTE
Box Contents
When the pallet contents are opened, the three large boxes should contain one each of the major
assemblies shown below and on the next page.
Figure 1 . Major Assemblies
Entry Arch
Exit Arch
Lower Assembly —
The System Control Box and
Bottom Scanner are shipped
fully assembled inside the
Common Mounting Struc-
ture
System Control Box Bottom Scanner
Common Mounting Structure
Product Flow
-OR-
The installer will need to reference the Product Reference Guide (PRG, available for viewing & download
at the Datalogic website) for information about site preparation, grounding, feature configuration, trou-
bleshooting, calibration and all other topics involved in installing the scanning system.
This manual covers more than one model of the Jade X7 product. Your model
may differ slightly from the images shown. Alternate diagrams are shown
when necessary to explain the differences between models.
Additionally, differences due to multiple checkstand types and options may be present.

Introduction
2 Jade™ X7 Portal Scanner
Scanner Features
The major parts of the scanner are shown below. Access to the Lower Assembly is dependent upon
how the system integrator or manufacturer has designed your checkstand. Ideally, entry panels have
been built in that allow easy visibility and access to the necessary parts and features.
Figure 2. Scanner Features
Entry Arch
Exit Arch
Lower Assembly
System
Bottom Scanner
Control Box
Product
Flow
-OR-

Operation
Quick Reference Guide 3
Operation
CAUTION
Power-on
If scanner power is not already on, press the power switch located on the System Control Box to the ON
position. The illustration that follows show the ON/OFF Switch for both models. The scanner arch indi-
cator lights will then show the Startup indication (indicated by arch indicator lights blinking red, green,
blue as described on page 7). Scanner startup can take several minutes.
If the scanner is already powered on, but in Sleep Mode (indicated by arch indicator lights blinking blue),
it can be returned to Normal Operation by a host command from the POS.
Figure 3. ON / OFF Switch and Grounding Screw Location
EDCBA
POS
12V
POS
EDCBA
POS POS
12V,10.5A
CLASS 1
WIRING
-OR-
Grounding Screw
ON / OFF
Switch
(not present on all models)
Prior to powering on the Jade unit, the installer should ensure that the Jade unit
has been grounded to earth ground. Some models have a Grounding Screw (shown
in Figure 3 below). Reference the Jade X7 PRG for complete grounding and installa-
tion instructions.

Operation
4 Jade™ X7 Portal Scanner
Scanning
The surface from the conveyor belt and beneath the arches up to, and including the transition plate
constitutes the effective scanning area. Imager/cameras distributed throughout the arches “curtain”
the area within that zone for scanning items on five sides. The sixth side (bottom) of an item is scanned
by the upward-facing optics (bottom scanner) beneath the transition plate.
Items for purchase are placed in the queuing zone of the conveyor belt, then swiftly carried by the con-
veyor through the scanning arches and over the transition plate. Once the item has passed through the
scanner, it is ready to accept another item. Since this process takes only seconds, the queuing area is
cleared and ready for another item almost immediately.
NOTE
Scan Zone: Arches
Scan Zone:
Bottom Scanner
Transition Plate
Control Panel
Depending on your model, the Control Panel is located either below or above the System Control Box.
The Control Panel is part of the Lower Assembly and is accessed by sliding it out from the unit.
Control Panel Functions include but are not limited to visual display for the internal computer running
the Scanner software.
Control Panel
-OR-
Items are placed on the belt without regard to whether the bar code for the previ-
ously placed item was successfully read. The scanner will use ViPR object recogni-
tion technology in an attempt to recognize any unread items. If an item remains
unidentified, image and object information are sent to the POS so that the item can
be added to the transaction manually or by some other means.

Maintenance
Quick Reference Guide 5
Maintenance
Cleaning
The scanner will provide dependable service for many years. The following maintenance procedures will
keep your scanner operating at peak performance.
Whenever needed, gently clean the transparent surfaces of the arches, the bottom scanner debris tray
and the transition plate glass using paper towels or lint-free cleaning tissues dampened with a non-
abrasive, mild, water-based glass cleaner (as shown in the inset). The other surfaces can also be
cleaned using the same cleaning agents. Do not allow fluids to flow into the internal parts of the scan-
ner.
CAUTION
Figure 4. Cleaning the Scan Windows, Debris Tray and Transition Plate Glass
NOTE
DO NOT use abrasive pads or cleaning agents.
DO NOT spray or pour liquids directly onto the scanner.
The Portal Scanner will send an alert message when the bottom scanner debris
tray and transition glass are in need of cleaning.

Maintenance
6 Jade™ X7 Portal Scanner
Spillage
Inevitably, packages placed on the conveyor belt will break open or bottles will leak. In anticipation of
this problem, the scanner has been designed to channel the flow of spillage through less-vulnerable
areas. Figure 5 shows how a leakage is routed by the Debris Tray/Window toward the outside of the
unit, then through a drain hole into a container placed to collect it. This container, of course, must be
periodically checked and emptied.
Figure 5. Provisions for Spillage
END SIDE
Debris Tray/
Window
Liquid and Debris Spillage
Drain Hole
Spillage
Container
Debris Tray/Window
A Debris Tray/Window is located just beneath the transition plate. The tray acts to collect and route
any spillage from the conveyor belt area and protect the bottom scanner from contamination. For best
scan performance it is important to regularly check and clean the Debris Tray/Window to ensure the
Bottom Scanner optics are never obscured.
Figure 6. Removing/Reinstalling the Debris Tray/Window
Debris Tray/Window