Datalogic Matrix 450 User manual

MATRIX 450™
Reference Manual

Datalogic Automation S.r.l.
Via Lavino, 265
40050 - Monte S. Pietro
Bologna - Italy
Matrix 450™ Reference Manual
Ed.: 05/2012
© 2012 Datalogic Automation S.r.l. ALL RIGHTS RESERVED. Protected to the fullest extent under
U.S. and international laws. Copying, or altering of this document is prohibited without express written
consent from Datalogic Automation S.r.l.
Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries,
including the U.S.A. and the E.U.
Matrix 450, ID-NET, VisiSet and X-PRESS are trademarks of Datalogic Automation S.r.l. All other
brand and product names mentioned herein are for identification purposes only and may be
trademarks or registered trademarks of their respective owners.
Datalogic shall not be liable for technical or editorial errors or omissions contained herein, nor for
incidental or consequential damages resulting from the use of this material.
07/05/12

iii
CONTENTS
REFERENCES ............................................................................................................vi
Conventions................................................................................................................. vi
Reference Documentation........................................................................................... vi
Service and Support .................................................................................................... vi
Patents.........................................................................................................................vi
COMPLIANCE............................................................................................................vii
EMC Compliance.........................................................................................................vii
Power Supply...............................................................................................................vii
CE Compliance............................................................................................................vii
FCC Compliance .........................................................................................................vii
LT-03x Laser Safety ...................................................................................................viii
HANDLING..................................................................................................................ix
GENERAL VIEW.........................................................................................................xi
1RAPID CONFIGURATION ...........................................................................................1
Step 1 – Assemble the Reader.....................................................................................1
Required Accessories...................................................................................................2
Step 2 – Connect the System.......................................................................................3
Step 3 – Mount and Position the Reader......................................................................6
Step 4 – Focus the Reader...........................................................................................7
Step 5 – Calibrate Image Density.................................................................................8
Step 6 – X-PRESS™ Configuration............................................................................10
Reset Reader to Factory Default (Optional) ...............................................................11
Step 7 – Installing VisiSet™ Configuration Program ..................................................12
Step 8 – Configuration Using Setup Wizard ...............................................................13
Step 9 – Test Mode ....................................................................................................18
Advanced Reader Configuration.................................................................................19
2INTRODUCTION ........................................................................................................20
2.1 Product Description ....................................................................................................20
2.2 Indicators and Keypad Button.....................................................................................23
2.3 ID-NET™ ....................................................................................................................24
2.3.1 How To Setup/Configure the Reader Network ...........................................................25
2.3.2 ID-NET™ Slave Management Through Master..........................................................27
2.4 External Memory Backup and Restore Through VisiSet™.........................................29
2.5 X-PRESS™ Human Machine Interface ......................................................................34
2.5.1 X-PRESS™ Functions................................................................................................34
2.6 Model Description.......................................................................................................37
2.7 Accessories ................................................................................................................38
2.8 Application Examples .................................................................................................39
2.8.1 Manual Postal Sorting.................................................................................................39
2.8.2 Loading/Unloading......................................................................................................40
2.8.3 Automated Postal Sorting...........................................................................................41
2.8.4 Multimedia and Flats...................................................................................................41
2.8.5 Order Fulfilment..........................................................................................................42
2.8.6 Static Scan..................................................................................................................42
2.8.7 Manual Presentation Scanning...................................................................................43
3INSTALLATION .........................................................................................................44

iv
3.1 Package Contents ......................................................................................................44
3.2 Mechanical Dimensions..............................................................................................45
3.3 Mounting and Positioning Matrix 450™......................................................................47
4CBX ELECTRICAL CONNECTIONS.........................................................................50
4.1 Power Supply..............................................................................................................51
4.1.1 Recommended Power Supplies .................................................................................51
4.2 Main Serial Interface...................................................................................................52
4.2.1 RS232 Interface..........................................................................................................52
4.2.2 RS485 Full-Duplex Interface.......................................................................................53
4.2.3 RS485 Half-Duplex Interface......................................................................................54
4.3 ID-NET™ Interface .....................................................................................................57
4.3.1 ID-NET™ Cables........................................................................................................57
4.3.2 ID-NET™ Response Time ..........................................................................................58
4.3.3 ID-NET™ Network Termination..................................................................................62
4.4 Auxiliary RS232 Interface ...........................................................................................62
4.5 Inputs..........................................................................................................................63
4.6 Outputs .......................................................................................................................66
4.7 External Illuminators ...................................................................................................68
4.8 User Interface - Host...................................................................................................69
5MATRIX 450™ ELECTRICAL CONNECTIONS ........................................................70
5.1 Matrix 450™ Power, Serial Host, I/O Connector ........................................................70
5.2 Matrix 450™ Lighting System Control Connector.......................................................71
5.2.1 LT-03x Input Power Connector (on LT-03x) ...............................................................71
5.3 Matrix 450™ GigaEthernet Connector (**) .................................................................72
5.4 Power Supply..............................................................................................................72
5.4.1 Recommended Power Supplies .................................................................................73
5.5 Main Serial Interface...................................................................................................73
5.5.1 RS232 Interface..........................................................................................................73
5.5.2 RS485 Full-Duplex Interface.......................................................................................74
5.5.3 RS485 Half-Duplex Interface......................................................................................76
5.6 ID-NET™ Interface .....................................................................................................78
5.6.1 ID-NET™ Cables........................................................................................................78
5.6.2 ID-NET™ Response Time ..........................................................................................79
5.6.3 ID-NET™ Network Termination..................................................................................83
5.7 Auxiliary RS232 Interface ...........................................................................................83
5.8 Ethernet Interface .......................................................................................................84
5.9 Inputs..........................................................................................................................85
5.10 Outputs .......................................................................................................................88
5.11 User Interface .............................................................................................................90
6TYPICAL LAYOUTS ..................................................................................................91
6.1 Point-to-Point..............................................................................................................91
6.1.1 Serial Host ..................................................................................................................91
6.1.2 Embedded (On-Board) GigaEthernet .........................................................................92
6.1.3 TCP/IP Ethernet (BM2x0) ...........................................................................................93
6.1.4 Fieldbus ......................................................................................................................94
6.2 Ethernet Networks ......................................................................................................95
6.2.1 External Trigger Ethernet Host ...................................................................................95
6.2.2 No Trigger Ethernet Host............................................................................................96
6.3 Pass-Through Networks .............................................................................................97
6.3.1 Pass-Through on RS232 ............................................................................................97
6.3.2 Pass-Through on ID-NET™........................................................................................98
6.4 ID-NET™ Networks ....................................................................................................99

v
6.4.1 M/S Synchronized Serial Host....................................................................................99
6.4.2 M/S Synchronized TCP/IP Host................................................................................101
6.4.3 M/S Multidata Serial Host .........................................................................................102
6.4.4 M/S Multidata TCP/IP Host.......................................................................................103
6.4.5 M/S Synchronized and Multidata Fieldbus Host.......................................................104
7READING FEATURES.............................................................................................105
7.1 Optical Accessory Selection .....................................................................................105
7.2 Reading Diagrams....................................................................................................106
7.3 Maximum Line Speed and Exposure Time Calculations ..........................................116
8SOFTWARE CONFIGURATION..............................................................................118
8.1 VisiSet™ System Requirements...............................................................................118
8.2 Installing VisiSet™....................................................................................................119
8.3 Startup ......................................................................................................................119
8.3.1 VisiSet™ Options......................................................................................................120
8.4 Configuration ............................................................................................................122
8.4.1 Edit Reader Parameters ...........................................................................................123
8.4.2 Send Configuration Options......................................................................................125
8.4.3 Calibration.................................................................................................................129
8.4.4 Multi Image Acquisition Settings...............................................................................133
8.4.5 Run Time Self Tuning (RTST) ..................................................................................133
8.4.6 Region Of Interest Windowing..................................................................................134
8.5 Image Capture and Decoding...................................................................................135
8.6 Statistics ...................................................................................................................135
9MAINTENANCE .......................................................................................................136
9.1 Cleaning....................................................................................................................136
10 TROUBLESHOOTING .............................................................................................137
10.1 General Guidelines...................................................................................................137
11 TECHNICAL FEATURES.........................................................................................140
GLOSSARY..............................................................................................................142
INDEX.......................................................................................................................145

vi
REFERENCES
CONVENTIONS
This manual uses the following conventions:
"User" refers to anyone using a Matrix 450™ reader.
"Reader" refers to the Matrix 450™ reader.
"You" refers to the System Administrator or Technical Support person using this manual to
install, configure, operate, maintain or troubleshoot a Matrix 450™ reader.
REFERENCE DOCUMENTATION
For further details refer to: the VisiSet™ Help On Line, Matrix Reading Methods, Matrix Host
Mode Programming, Matrix SW Parameter Guide provided as supplementary documentation
on Mini-DVD.
SERVICE AND SUPPORT
Datalogic provides several services as well as technical support through its website. Log on
to www.automation.datalogic.com and click on the links indicated for further information:
PRODUCTS
Search through the links to arrive at your product page which describes specific Info,
Features, Applications, Models, Accessories, and specific Downloads.
DOWNLOAD > PRODUCT LITERATURE > SW&UTILITIES
The VisiSet™ utility program, which allows device configuration using a PC can be
downloaded from this page. It provides RS232 and Ethernet interface configuration.
SERVICE
- Overview - Technical Support, Maintenance Agreements and Warranty Extensions
- Repair Centers
- Helpdesk
- Material Return Authorization
PATENTS
This product is covered by one or more of the following patents:
Design patents: EP 1,950,486.
Utility patents: US6,512,218 B1; US6,616,039 B1; US6,808,114 B1; US6,997,385 B2;
US7,053,954 B1; US7,102,116 B2; US7,282,688 B2; US7,387,246 B2; US7,433,590 B2;
US7,468,499 B2; US8,058,600 B2; US8,113,430 B2; EP996,284 B1; EP999,514 B1;
EP1,014,292 B1; EP1,128,315 B1; EP1,396,811 B1; EP1,413,971 B1; EP1,804,089 B1;
JP4,435,343 B2; CN ZL200680050007,8.
Additional patents pending.

vii
COMPLIANCE
For installation, use and maintenance it is not necessary to open the reader.
Only connect Ethernet and dataport connections to a network which has routing only within
the plant or building and no routing outside the plant or building.
EMC COMPLIANCE
In order to meet the EMC requirements:
connect reader chassis to the plant earth ground by means of a flat copper braid shorter than
100 mm;
for CBX connections, connect the pin "Earth" to a good Earth Ground;
for direct connections, connect the main interface cable shield to pin K of the 19-pin connector.
POWER SUPPLY
ATTENTION: READ THIS INFORMATION BEFORE INSTALLING THE PRODUCT
This product is intended to be installed by Qualified Personnel only.
This product is intended to be connected to a UL Listed Computer which supplies power
directly to the reader or a UL Listed Direct Plug-in Power Unit marked LPS or “Class 2”.
CE COMPLIANCE
Warning: This is a Class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
FCC COMPLIANCE
Modifications or changes to this equipment without the expressed written approval of Datalogic could
void the authority to use the equipment.
This device complies with PART 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference which may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.

viii
LT-03X LASER SAFETY
The LT-03x Series Lighting Systems contain two aiming Laser LEDs used to position the
reader.
Therefore the product is classified as a Class 2 laser product according to IEC 60825-1
regulations and as a Class II laser product according to CDRH regulations. Disconnect the
power supply when opening the device during maintenance or installation to avoid exposure
to hazardous laser light. The laser beam can be switched on or off through a software
command.
C
R
US
This product is covered by one or more of following patents:
U.S. Pat.: 6,808,114 B1; 6,997,385 B2; 7,387,246 B2.
See product manual and package for entire patent listing.
DATALOGIC AUTOMATION S.r.l.

ix
HANDLING
The Matrix 450™ is designed to be used in an industrial environment and is built to withstand
vibration and shock when correctly installed, however it is also a precision product and
therefore before and during installation it must be handled correctly to avoid damage.
avoid that the readers are dropped (exceeding shock limits).
N
O
do not fine tune the positioning by striking the reader or bracket.
NO

x
do not weld the reader into position which can cause electrostatic, heat or reading window
damage.
NO
do not spray paint near the reader which can cause reading window damage.
N
O

xi
GENERAL VIEW
Matrix 450™ + LT-03x
Figure A
7
10
8
11
12
9
3
6
5
4
1
2
2
1 Device Class Label
Mounting Holes (6)
Lens Cover
Lens (separate accessory)
MAC Address Label
Ethernet Connector
Power LED
LT-03x Lighting System
(separate accessory) Ethernet Network Presence LED
HMI X-PRESS™ Interface Lighting System Signal - Power Connector
Power - Serial Interfaces - I/O Connector
2
3
4
5
6
7
8
9
10
11
12

xii

RAPID CONFIGURATION
1
1
1 RAPID CONFIGURATION
STEP 1 – ASSEMBLE THE READER
The first step to perform is to assemble the accessories that make up the Matrix 450™
reader. The lens and lighting system or external illuminator must be used. This procedure
shows an LT-03x series lighting system.
CAUTION
Matrix 450™ must be disconnected from the power supply during this
procedure.
1. In a dust-free environment, remove the Matrix 450™ Lens Cover by unscrewing it.
CAUTION
Do not touch the sensor aperture, lens glass or lens cover glass. These
areas must be kept clean. Avoid any abrasive substances that might
damage these surfaces during cleaning.
2. Remove the sensor protection label by pulling it off of the base.
3. Mount the LNS-12xx lens by slowly screwing it onto the base until it arrives at the
mechanical stop.
NOTE
The lens mount is equipped with a special slip mechanism and together
with the LT-03x design facilitates the focusing procedure during installation,
for example if the locking knobs on the lens are obstructed by the body of
the illuminator. See note in Step 4 "Focusing the Reader" or Step 8.
Figure 1 – Assembling Matrix 450™ and LNS-12xx Lens
NOTE
The anti-vibration components are already mounted to all Datalogic
LNS-12xx Lenses.
4. To keep dust and dirt off of the lens during mounting, temporarily replace the lens cover.
Locking Knobs Lens Cover
anti-vibration components
(see note below)
Protective Film
(remove before calibration)
Matrix 450™ Base

MATRIX 450™ REFERENCE MANUAL
2
1
Figure 2 – Assembling Matrix 450™ to LT-03x
NOTE
The mating bracket can be mounted in the reverse direction to create a
compact version of the Matrix 450™ + LT-03x assembly. The compact
assembly however will reduce access to the lens for the focusing procedure.
REQUIRED ACCESSORIES
The following table shows the correct lens/illuminator combinations to be used for Matrix
450™ imager assembly.
Lenses Illuminators
93ACC0041 LNS-1216 16 mm C-Mount Lens 5MP
with anti-vibration components 93A400034 LT-032 ULTRA POWER LT NARROW BLUE 40°
93A400032 LT-030 ULTRA POWER LT SUPERNARROW
BLUE 20°
93A400033 LT-031 ULTRA POWER LT SUPERNARROW
WHITE 20°
93ACC0034 LNS-1225 25 mm C-Mount Lens 5MP
with anti-vibration components
93A400034 LT-032 ULTRA POWER LT NARROW BLUE 40°
93A400032 LT-030 ULTRA POWER LT SUPERNARROW
BLUE 20°
93ACC0035 LNS-1235 35 mm C-Mount Lens 5MP
with anti-vibration components 93A400033 LT-031 ULTRA POWER LT SUPERNARROW
WHITE 20°
93A400032 LT-030 ULTRA POWER LT SUPERNARROW
BLUE 20°
93ACC0036 LNS-1250 50 mm C-Mount Lens 5MP
with anti-vibration components 93A400033 LT-031 ULTRA POWER LT SUPERNARROW
WHITE 20°

RAPID CONFIGURATION
3
1
STEP 2 – CONNECT THE SYSTEM
In the typical standalone layout shown in the figure below a serial host is connected to the
Matrix 450™ + LT-03x. The reader operates in One Shot or Phase Mode and can use an
external trigger to signal image acquisition.
The CBX is used to facilitate the connection between the Matrix 450™ + LT-03x assembly
and the serial host interface, external trigger, serial aux configuration, and optional input and
output devices.
Matrix 450™ Standalone Layout to Serial Host
Power Supply Connection
Use the PG-120 power Kit (3 versions for European, UK or US plug) and CAB-PG-0002
+ BA400 connector to connect the PG-120 to the CBX. An alternative power supply to the
PG-120 is the PWR-120.
CBX Connection
Use CAB-LP-0x to supply power from the CBX to the LT-03x. Connect Brown/White
wires to Vdc and Black/Blue wires to GND. Connect the cable shield to Earth ground.
Use CAB-MS0x between Matrix 450™ and the CBX for: power, serial host, external
trigger device (photocell), serial aux, additional I/O connections.
Optionally: use the CAB-GE0x for the Gigabit Ethernet connection towards a remote host
or Datalogic WebSentinel™ monitoring station.
Matrix 450™ LT-03x Connection
Use the CAB-LD-102 (no power) cable (provided with the LT-03x), to connect the
communication signals between the Matrix 450™ and the LT-03x while isolating the
power. Through the CBX internal power switch you can control power to the Matrix 450™
independently from the LT-03x.
NOTE
Matrix 450™ does not support sourcing power towards the CBX in order to
power I/O devices. These devices must be powered through the CBX or
from an external source.
CAB-GE0x (to Remote Host or
Datalogic WebSentinel™ Monitor)
CAB-PG-0002
+ BA400
CAB-MS0x
CAB-LP-0x
CAB-LD-102
(no power)
Serial Host
PG-120
Ext. Trigger
CBX500
AUX (Matrix 450™
configuration)
I/O

MATRIX 450™ REFERENCE MANUAL
4
1
Alternatively, Matrix 450™ + LT-03x can be connected directly to an Ethernet host through
the Gigabit Ethernet connection (CAB-GE0x). If an external trigger is not necessary, the
layout is simplified. The LT-03x is powered directly from the PG-120 through the CAB-PG-
0105 cable. The CAB-LD-002 (with power) cable (provided with the LT-03x), is used to
supply power to the Matrix 450™ from the LT-03x.
Matrix 450™ Standalone Layout to Ethernet Host
Matrix 450™ + LT-03x can also be used in an ID-NET™ Master/Slave configuration. See
Chapter 6 of this Reference Manual for details, and par. 4.1.1 or 5.4.1 for power supply
recommendations.
NOTE
If using separate power sources for LT-03x and Matrix 450™, make sure
that LT-03x is powered up before Matrix 450™ in order to be correctly
recognized.
CAB-GE0x
CAB-PG-0105
CAB-LD-002
(with power)
PG-120
Ethernet Host
(Data collection +
Matrix 450™ configuration)

RAPID CONFIGURATION
5
1
CBX100/CBX500 Pinout for Matrix 450™
The table below gives the pinout of the CBX100/CBX500 terminal block connectors. Use this
pinout when the Matrix 450™ reader is connected by means of the CBX100/CBX500:
CBX100/500 Terminal Block Connectors
Input Power Outputs
Vdc Power Supply Input Voltage + +V Power Source - Outputs
GND Power Supply Input Voltage - -V Power Reference - Outputs
Earth Protection Earth Ground O1+ Output 1 +
O1- Output 1 -
Inputs O2+ Output 2 +
+V Power Source – External Trigger O2- Output 2 -
I1A External Trigger A (polarity insensitive) Auxiliary Interface
I1B External Trigger B (polarity insensitive) TX Auxiliary Interface TX
-V Power Reference – External Trigger RX Auxiliary Interface RX
+V Power Source – Inputs SGND Auxiliary Interface Reference
I2A Input 2 A (polarity insensitive) ID-NET™
I2B Input 2 B (polarity insensitive) REF Network Reference
-V Power Reference – Inputs ID+ ID-NET™ network +
Shield ID- ID-NET™ network -
Shield Network Cable Shield
Main Interface
RS232 RS485 Full-Duplex RS485 Half-Duplex
TX TX+ RTX+
RTS TX- RTX-
RX *RX+
CTS *RX-
SGND SGND SGND
* Do not leave floating, see par. 4.2.2 for connection details.
CAUTION
Do not connect GND, SGND and REF to different (external) ground
references. GND, SGND and REF are internally connected through filtering
circuitry which can be permanently damaged if subjected to voltage drops
over 0.8 Vdc.

MATRIX 450™ REFERENCE MANUAL
6
1
STEP 3 – MOUNT AND POSITION THE READER
1. To mount the Matrix 450™ + LT-03x assembly, use the L-shaped mounting bracket to
obtain the most suitable position for the reader. The most common mounting
configurations are shown in the figure below. Other mounting solutions are provided in
Chapter 3 of this Reference Manual.
Figure 3 –Positioning with LT-03x L-shaped Mounting Bracket
CAUTION
Do not mount the Matrix 450™ + LT-03x assembly with the Matrix 450™
body mounting bracket accessory. The body mounting bracket is not
designed to support the LT-03x.
2. When mounting the Matrix 450™ + LT-03x assembly, take into consideration these three
ideal label position angles: Pitch or Skew 10° to 20° and Tilt 0°, although the reader can
read a code at any tilt angle. Assure at least 10° Pitch or Skew to avoid direct illuminator
light reflection which will reduce performance.
3. Refer to the Reading Diagrams to determine the correct reading distance according to
your application requirements.
NOTE
Rapid Configuration of the Matrix 450™ reader can be made either through
the X-PRESS™ interface (steps 4-6) which requires no PC connection, or
by using the VisiSet™ Setup Wizard (steps 7-8). Select the procedure
according to your needs.
Both the X-PRESS™ interface and the VisiSet™ Setup Wizard are easy setup methods valid
for single code applications with uniform labels that do not require reading at the extreme
ends of the reading ranges shown in the diagrams.
For advanced applications including those that operate at the extreme ends of the reading
ranges, use the VisiSet™ Calibration Tool. See the Help On Line for more details.
Pitch
Tilt
Pitch
Tilt

RAPID CONFIGURATION
7
1
STEP 4 – FOCUS THE READER
Matrix 450™ provides a built-in tool called Blue Diamonds™ to aid focusing the reader. The
Blue Diamonds™ are accessed through the X-PRESS™ Interface.
1. Remove the lens cover in order to focus the reader.
2. Prepare the correct accessory lens for your application:
NOTE
Once the lens is fully tightened to the mechanical stop (Step 1), it can be
rotated counterclockwise (up to one full turn without loosening the lens), so
that the diaphragm scale and locking knobs can be easily accessed from
behind the LT-03x.
a. Remove the anti-vibration o-ring from the two Locking Knobs on the lens and loosen
them.
b. Adjust the Focus ring to the "Far position" and the Diaphragm ring to the "F2.8"
number setting which is the preferred setting for installation using the X-PRESS™
interface.
3. Power the reader on. During the reader startup (reset or restart phase), all the LEDs
blink for one second. On the connector side of the reader near the cable, the “POWER
ON” LED (blue) indicates the reader is correctly powered.
4. Enter the Focus function by pressing and holding the X-PRESS™ push button until the
Focus LED is on.
Figure 4 – X-PRESS™ Interface: Focus Function
5. Release the button to enter the Focus function. The Blue Diamonds™ and laser pointers
turn on.
NOTE
If the reading surface is too dark, in order to increase the contrast, it may be
helpful to place a piece of white paper at the Blue Diamonds™ positions to
see them better.
The procedure is as follows:
a. At the correct reading distance (see the Reading Diagrams in Chapter 7 of this
Reference Manual), adjust the Focus ring towards the "Near position" until the Blue
Diamonds™ are perfectly in focus, see Figure 5.
b. At long focal distances a "skew" angle may cause a noticeable difference in focus
between the two diamonds, in this case select the best possible focus (both diamonds
slightly out of focus). Tighten the Focus Locking Knob.
c. Set the Diaphragm to the aperture stop (F-number) stated in the conditions relative to
the selected reading diagram and then tighten the Diaphragm Locking Knob.
d. Replace the anti-vibration o-ring onto the two Locking Knobs.
NOTE
If necessary you can use the Fine Focusing Tool in the VisiSet™ Setup
Wizard for fine focusing. See Step 8.
READY
SETUP
FOCUS
TEST LEARN
GOODTRIGGERCOMSTATUS
red yellow yellow green green

MATRIX 450™ REFERENCE MANUAL
8
1
Figure 5 – Focus Function Using Blue Diamonds™
6. Exit the Focus function by pressing the X-PRESS™ push button once. The Blue
Diamonds™ turn off.
7. Replace the lens cover, screwing it tightly to the base.
STEP 5 – CALIBRATE IMAGE DENSITY
In order to function correctly to the fullest extent of its capabilities, Matrix 450™ must acquire
information regarding image density or PPI (pixels per inch). This calibration takes place
through the X-PRESS™ Interface and the Focusing and PPI Setup Chart included in the
package. This procedure is necessary for the first time installation, if the lens type is changed
or if the focal distance is changed.
Locate
1. Enter the Focus function by pressing and holding the X-PRESS™ push button until the
Focus LED is on.
2. Release the button to enter the Focus function. The Blue Diamonds™ and laser pointers
turn on.
Figure 6 – X-PRESS™ Interface: Locate Function
3. From the Focusing and PPI Setup Chart, position the 1 mm code at the center of the
Horizontal FOV (aligned with the laser pointers).
Figure 7 –Aligning the Focusing and PPI Setup Chart Using Laser Pointers as Reference
4. Exit the Focus function by pressing the X-PRESS™ push button once. The Blue
Diamonds™ and laser pointers turn off.
READY
SETUP
FOCUS
TEST LEARN
GOODTRIGGERCOMSTATUS
red yellow yellow green green
Your reader can have one of the
above types of Blue Diamonds™.
Blue Diamond™
in focus
FOV