Datalogic Joya X2 User manual

X2 General Purpose
THE TERMINAL
822001771 (Rev A) Nov. 2017
KEYPAD
1. Programmable Function Keys.
2. Scan Key – Use it to turn on the Joya X2.
GETTING STARTED
Insert the Battery
1. Insert battery contacts into the hole of the
battery box as shown in the picture below
2. Unscrew and remove the bottom cover
3. Insert the top cover, then insert the bottom
cover and fasten it with a screwdriver
Charge the Battery
With Single Slot Dock
RESETTING THE JOYA X2
Cold Boot
Simultaneously press F1 + F2 + ENTER
Or
Press with a pin or a paper clip the cold boot
button on the back of the mobile computer.
Warm Boot
Simultaneously press SCAN + ENTER.
Clean Boot
1. Perform a cold boot
2. As soon as the device is rebooting, press
simultaneously Esc + ENTER, holding both
keys down for few seconds
3. Press ENTER to confirm.
Suspend
Simultaneously press SCAN + F1
Resume from Suspend
Press SCAN.
A. Color Display*
*. Remove protective film cover before use
D. Laser Safety Label
B. Front Scan Key E. Product Label
C. Keyboard F. Micro USB Port
G. Cold Boot Button
H. Data Capture
Window
I. Dock Contacts
CAUTION
Do not use the Joya X2 until
batteries are charged for minimum
4 hours.
NOTE
We recommend that the Joya X2 GP
is used only for WiFi applications.
The microUSB connector is intended
only for occasional
communications.

SYNCHRONIZE YOUR DEVICE WITH THE PC
Set up Synchronization using Windows
Mobile® Device Center
Windows Mobile® Device Center can be
downloaded from Microsoft website
www.microsoft.com. It is only compatible with
Windows Vista and Windows 7; if you run
Windows XP or earlier, you have to download
Microsoft ActiveSync.
You can establish a connection to your Joya X2
through the following interfaces:
- USB either directly or through the Single
Dock
- Bluetooth®
To establish a partnership between the Joya X2
and a host PC, start Windows Mobile® Device
Center and follow the steps below:
1. Select the "ENABLE DIRECT CONNECTION TO
THE DESKTOP COMPUTER" from the JOYA
X2 PC connection menu.
2. Connect the Joya X2 to the host PC. Win-
dows Mobile® Device Center configures
itself and then opens.
3. On the license agreement screen, click
Accept.
4. On the Windows Mobile Device Center’s
Home screen, click Set up your device.
5. Select the information types that you want
to synchronize, then click Next.
6. Enter a device name and click Set Up.
When you finish the setup wizard, Windows
Mobile Device Center synchronizes the mobile
computer automatically.
SCANNING AND IMAGING
Imager Data Capture
Relative Size and Location of Aiming System Pattern
REFERENCE DOCUMENTATION
For further information regarding Joya X2 refer
to the SDK Help on-Line and to the Joya X2
User’s Manual.
For information regarding safety and
regulatory refer to the dedicated section of the
Joya X2 User’s Manual.
WARRANTY TERMS AND CONDITIONS
The warranty period is 1 year for the device and
90 days for consumables (e.g. battery, power
supply, cable etc.) from date of purchase at our
company.
PATENTS
Patent. See www.patents.datalogic.com for
patent list.
SUPPORT THROUGH THE WEBSITE
Datalogic provides several services as well as
technical support through its website. Log on
to www.datalogic.com and click on the
SUPPORT link which gives you access to:
Downloads by selecting your product model
from the dropdown list in the Search by
Product field for specific Data Sheets, Manuals,
Software & Utilities, and Drawings;
Repair Program for On-Line Return Material
Authorizations (RMAs) plus Repair Center
contact information;
Customer Service containing details about
Maintenance Agreements;
Technical Support through email or phone.
©2015-2017 Datalogic S.p.A. and/or its affiliates. All
rights reserved. Datalogic and the Datalogic logo are
registered trademarks of Datalogic S.p.A. in many
countries, including the U.S. and the E.U.
The Joya logo is a trademark of Datalogic S.p.A. and/
or its affiliates, registered in the U.S. and the E.U. All
other trademarks and brands are property of their
respective owners.
www.datalogic.com
LINEAR BARCODE 2D MATRIX SYMBOL