Daytona 87352 User manual

Instruction Manual
* Before installing this product, please read this Instruction Manual to learn how to use the product correctly.
* Please keep this Instruction Manual in a safe and convenient location for easy access.
* If you plan to transfer ownership of your vehicle with this product already installed to a third party, be sure to include this manual.
SMARTPHONE CONTROLLER Applicable vehicle
type Product No.
All-terrain 87352
87352①/⑧
December 17, 2014
■Precautions■
* Daytona Corp. is not liable for any accidents or damages caused by misuse, or usage that does not
follow the instructions or cautions stated in this manual.
* The product is covered by the warranty provisions stated on the back of the warranty card. Please read
and understand the warranty provisions and keep the warranty card along with this Instruction Manual in
a safe place.
The following symbols are used in this Instruction Manual to highlight important
precautions regarding appropriate installation, usage, and maintenance.
WARNING This symbol indicates the presence of information about risk of death or serious injury
that could be caused if you use the product without meeting the requirements.
CAUTION This symbol indicates the presence of information about risk of injury or material
damage that could be caused if you use the product without meeting the requirements.
ENFORCE
This symbol indicates actions to be
enforced.
PROHIBIT
This symbol indicates that the described
actions are prohibited.
VIOLATION
This symbol indicates that the described
actions may be violation of laws,
depending on conditions.
OTHERS
This symbol indicates the presence of
other warnings and/or cautions.
DO NOT
DISASSEMBLE
This symbol indicates that the described
action is prohibited.
NO WET
This symbol indicates that the described
action is prohibited.
・ Do not use the product in the vicinity of automatic control devices, such as automatic doors or fire
alarms. Otherwise, radio waves might adversely affect those devices, leading to accidents caused by
possible malfunction.
・ Never use the product inside an airplane, on airport premises, in the vicinity of broadcasting stations, or
inside hospitals. Doing so may adversely affect flight safety, operation of radio stations, or reception of
broadcasting signals. Or, it might cause damage or malfunction of medical equipment.
・ Be sure to turn off the power to the product inside any medical facility, such as a hospital. Do not use the
product in the vicinity of medical measurement devices or pace makers. Doing so may adversely affect
these medical devices.
・ Do not use or leave the product in locations exposed to high-temperature or high-humidity, or in the
vicinity of heating devices. Doing so may cause the product to deform, generate heat, generate fire,
explode, electrocute, or malfunction.
・ Never disassemble, alter, or repair the product. Doing so may cause fire, injuries, electrocution, or
malfunction. If you need a repair, consult Daytona Corp. or your local dealer.
・ Do not cover the product with cloth. Doing so may cause fire or injuries due to heat buildup.
・ Do not contaminate the surface with oil or grease. Surfaces contaminated with gasoline or oil may
deteriorate or cause malfunction.
・ Do not expose the product to strong impacts. Do not throw the product. Doing either may cause
malfunction.
・ Pay careful attention to prevent objects, such as liquid or metal fragments, from entering inside the
product. Otherwise, electrocution, fire or malfunction may be caused.
・ Use the product correctly. Also, observe warnings and cautions given by the manufacturer of the
connecting device.
・ Do not use the product if it is in abnormal condition, for example, if it is generating smoke or a burning
smell. Doing so may cause electrocution or fire. Stop using the product immediately.
・ Never operate the buttons on the product while driving the vehicle. This is very dangerous. Before
operating any button on the product, be sure to park the vehicle in a safe location. Otherwise, a traffic
accident may be caused. Do not stare at the screen of a connected device, such as a smartphone, while
driving the vehicle.
WARNING
PROHIBIT

87352②
/
⑧
December 17, 2014
Features
・ Although this product features dust and water resistance, do not install, store or leave it in locations
exposed to water, high humidity, dust, or oily smoke. Doing so may cause malfunction.
・ Do not leave the product in locations subject to direct sunlight or high temperature for a long period of
time. Doing so may cause damage, such as deformation of the product.
・ Do not install the product in a location on the vehicle that could be unstable or interfere with driving.
Doing so may cause the product to fall while you are driving, or may cause a traffic accident.
・ Daytona Corp. is not liable in any way for any loss of data or apps or software on the connected
device that is caused during usage of this product. Before you start using the product, be sure to
keep a backup of the data on the connecting device. Also, back up such data regularly.
・ For maintenance, do NOT use any solution that contains a volatile organic solvent, such as benzine or
thinner. Otherwise, the surface may be damaged or the product may malfunction.
・ Before using the product while driving the vehicle, be sure that you understand local laws and
ordinances.
・ This product features certification of conformance to technical standards based on the Wireless Radio
Act in Japan. If you plan to use the product outside of Japan, obey the wireless radio wave laws in the
country of usage.
・ The product uses a frequency band of 2.4GHz. Bluetooth features the same frequency band as a
2.4GHz wireless device or wireless LAN device, and may adversely affect performance of devices that
use the same frequency band. Before you start using this product, make sure that there are no wireless
stations nearby. If the product causes radio interference with other wireless stations, stop operating the
p
roduct immediatel
y
(
i.e.
,
sto
p
dischar
g
in
g
radio wave
)
.
・ Please note that if software on the connecting device is updated or changed, this product might
not operate properly.
・ Please note that if an abnormal situation occurs, for example, if you are unable to control the
connected device via this product, you may need to reset the connected device.
* If you reset the device, all stored settings and data will be deleted. Be sure to keep a backup of
the data on your device before you start using this product.
・ This product features a water-resistant design. However, it is not completely water-proof. Do not use the
product in the rain for a long period of time. Doing so may cause malfunction.
・ Do not leave the product in locations exposed to water, or soak it in water. Do not connect or disconnect
cables with wet hands. Otherwise, heat, fire, electrocution, or malfunction may be caused.
・ Please note that malfunction caused by water is not covered by the warranty.
・ Store the product in a location out of reach of toddlers. Otherwise, they might accidentally swallow parts
or attachments, or be injured.
・ This product can be used with devices that support the Bluetooth HID profile (such as smartphones and
tablet PCs). Some connecting devices that support the HID profile may not work properly depending on
the specifications of those devices.
・ Compatible operating systems include iOS6/7/8.1.1, and Android version 4.0 or higher. The
operation may vary depending on the model of your device and/or OS version.
* Daytona Corp. does not necessarily guarantee normal operation of all devices that feature an
OS supported by this product.
* If you use an Android device, select the setting for the device manufacturer's standard Home
screen.
The box cursor will not appear on any screens other than the manufacturer's standard Home
screen.
・ You may need to change the settings for the keyboard and character input method, depending on the
type of the connecting device.
・ This product is unable to control all functions of the connecting device. Also, depending on the model of
the connecting device, operating condition and operation of this product may vary. Please note that this
product functions in a manner similar to Bluetooth wireless keyboards. You can control the same
functions as wireless ke
y
boards.
Wirelessly connects and controls a Bluetooth-enabled smartphone or tablet.
* Limited to devices that feature the Bluetooth HID profile. Supported operating systems:
iOS6/7/8.1.1; Android version 4.0 or higher
An impressive 40 hours of continued use.
* This may vary depending on the environment or driving conditions.
Mountable on wide range of surfaces, from a φ22.2mm handlebar to a φ38 grip.
HID-supported profile.
* Some Bluetooth devices with a matched profile may not work.
Water-resistant design -- for peace of mind in case of unexpected rain. (IPX6 water-resistant standard)
(* Not completely waterproof)
Up to approx. 10m of sight distance for communication via the Bluetooth Standard Class 2 output.
* This may vary depending on the environment or driving conditions.
Works on button batteries (SR44 x 2pcs.). No power cable required. (* Supplied batteries have been
used to check the operation at the factory. )
ENFORCE
VIOLATION
OTHERS
CAUTION

87352③
/
⑧
December 17, 2014
Package Contents
Part Name
––
Using the Smartphone Controller
––
1. Installing batteries
Remove the battery case lid on the side panel of the Smartphone Controller using a coin, insert the button batteries included in the
package into the battery case, and then replace the lid.
CAUTION
* Insert the button batteries in the correct orientation by paying attention to the polarity of the batteries.
* Attach the water-resistant O-ring carefully before you replace the lid. If the position of the O-ring is slightly off, water-resistant
performance will decline and water might enter the unit.
* The rotatable angle of the battery case lid is about 5 degrees. Do not use force to rotate it further.
Otherwise, the lid will be damaged.
* Supplied batteries have been used to check the operation at the
time of shipment from the factory.
Therefore, the life of the original batteries may be short.
Daytona Corp. recommends that you replace the batteries
before you start using the Smartphone Controller.
・Remote controller x1 ・Spacer x2
・Clamp x1 ・Clamp fixing screw x2
・Rubber spacer
(Long) (Short) x2 each
Escape button
Cross joystick
Power button
Enter button
Clamp fixing
screw
LED
indicator
Home button
Clamp
Battery
case lid
O-ring
Button
battery
Spacer
Clamp
Clamp
fixing
screw
Spacer
Rubber spacer
* If the diameter of the handlebar is
φ25.4mm or φ22.2mm, attach the
rubber spacers to the inner side of the
s
p
acers.
Open Close
＋ －
2. Installing the Smartphone Controller on your vehicle
・Remove the clamp fixing screws to remove the clamp from the Smartphone Controller body, and then install the clamp and
Smartphone Controller body in a location on the handlebar or grip that will not interfere with your driving.
Use the supplied spacers or rubber spacers, depending on the thickness of the handlebar or grip. The inner diameter of the
Smartphone Controller is approximately φ38mm without any spacers. The diameter will become φ31mm if the spacers are attached.
If the diameter of the handlebar is φ25.4mm or φ22.2mm, attach the rubber spacers to the inner side of the spacers.
CAUTION
* Do not insert the clamp fixing screws on a slant, and do not tighten them too much. Otherwise, the screw holes on the Smartphone
Controller and the clamp fixing screws will be damaged. Tighten the screws carefully.

87352④
/
⑧
December 17, 2014
3. Operating the Smartphone Controller
【Power On】
While the power is off, press the Power button once.
(The LED indicator lights up or flashes red.)
・iOS mode............. Lights up steady.
・Android mode ...... Flashes.
* The LED indicator lights up or flashes for three
seconds before turning off, and then starts flashing,
indicating that the Smartphone Controller
automatically enters pairing mode.
【Power Off】
While the power is on, press the Power button once.
* If the Power button yields approximately 2mm when you push it lightly,
the power to the Smartphone Controller has already been turned on.
【Pairing】
(1) OS setting
Before performing the pairing operation, you must select the
OS mode that matches the OS of the connecting device.
While the Smartphone Controller is turned off, press the
Power button while pressing and holding down the Home
button and the Escape button. Repeating this operation will
toggle the OS setting options.
The LED status indicates the current OS setting option as
follows:
* Factory initial setting is iOS mode.
・iOS … When the power is turned on, the LED indicator lights up
red for three seconds, and then two small LEDs inside
the indicator alternately flash red.
・Android … When the power is turned on, the LED indicator
flashes red.
《Important》Read this before pairing!
The Smartphone Controller may be unable to unlock the screen on certain devices if the screen lock or passcode lock
function is enabled on those devices. Therefore, first disable the screen lock and passcode lock functions on your
connecting device before performing the pairing operation. Also, if the connected device enters sleep mode, pressing the
Home button on the Smartphone Controller may not display the home screen on the device. Daytona Corp. recommends
that you keep sleep mode disabled on the connected device until you learn how to use the Smartphone Controller very well.
(2) Pairing
・Make sure that the power to the Smartphone Controller is turned off, and then turn it on. In approximately three seconds, the
Smartphone Controller will enter pairing mode. If the LED indicator is flashing red, the Smartphone Controller is ready for pairing.
* If the Smartphone Controller is unable to find a connecting device within approximately 90 seconds after the LED
indicator starts flashing red, then pairing mode will expire and the LED indicator will turn off. In this case, power
off the Smartphone Controller, and then restart the pairing operation from the beginning.
・Prepare the connecting device for pairing.
* For more information, please refer to the instruction manual for the connecting device, or contact your local
dealer. Please note that Daytona Corp. is unable to answer questions regarding products other than ours.
・After a while, the flashing LED indicator will turn off, and pairing is complete.
* If the device is still not connected after the flashing LED indicator turns off, please restart the pairing operation
from the beginning.
* If the device is unable to pair with the Smartphone Controller within 90 seconds after the LED indicator changes
from simultaneous flashing to alternate flashing, the LED indicator will automatically turn off. In this case,
restart the pairing operation from the beginning.
* While the Smartphone Controller is connected to the device, if you press the Power button, the connection
between the device and the Smartphone Controller may not be cut off immediately. If you press the Power button
repeatedly under this condition, operation of the Smartphone Controller may become unstable. Also, the Cross
joystick may not work properly, or other symptoms may occur. In this case, turn off the power to the Smartphone
Controller, and wait to make sure that the connection with the device is cut off completely. Then, turn on the
power to the Smartphone Controller again. The LED indicator will flash (in Android mode) or light up (in iOS
mode) for three seconds, and then it will turn off. And then, when the LED indicator starts flashing again, press
any button other than the Power button once, and try to connect to the device. If the problem is not resolved,
restart the pairing operation from the beginning. If the problem persists after attempting to pair again, try to reset
the connecting device.
* If you are connecting an Android device, select the manufacturer's standard Home screen on the device.
Home screens provided by cellphone carriers are not compatible. Also, please note that navigation and
available options on the screen may vary depending on the device.
While pressing and holding down
the Home button and the Escape
button, turn on the power to the
Smartphone Controller.
Power On
LED
CAUTION
CAUTION
Pressing the Power button
repeatedly toggles
between power on and off.
CAUTION
CAUTION
CAUTION
CAUTION
CAUTION

87352⑤
/
⑧
December 17, 2014
CAUTION
〈Connecting to an iPhone〉* iOS6, 7, 8.1.1.
1. Select
"Settings."
2. Select
"Bluetooth."
3. Turn on
Bluetooth.
4. Select "SMART-
CONTROLLER"
for DEVICES.
5. When
"Connected" is
displayed,
pairing is
complete.
〈Connecting to an Android device〉* Android version 4.0 or higher
* An example of connecting to a Samsung Galaxy NoteⅡ(SC-02E)
1. Select
"Settings."
2. Turn on
Bluetooth.
3. Touch
"Bluetooth."
4. Touch "Scan,"
then select
"SMART-
CONTROLLER"
from the
"Available
devices" list.
5. When
"Connected to
input device" is
displayed,
pairing is
complete.
* Screens and settings may vary depending on the model of your device. Refer to the instruction manual for your device for more
information on the pairing operation.
* Be sure to use the manufacturer's standard Home screen. Cellphone carriers' Home screens are not supported.

87352⑥
/
⑧
December 17, 2014
–––
(3) Setting up the connecting device
<iPhone>
Turn on the VoiceOver function in the iPhone settings. (This function speaks text on the screen.)
When the VoiceOver function is enabled, a small box cursor appears over the app icon list. You can move this box around using the
Cross joystick to select an app.
Important:
* If the automatic passcode lock function is turned on, you will be unable to unlock the screen via the Smartphone Controller. Turn off
the passcode lock function on your device before using the Smartphone Controller.
* VoiceOver will speak text on the screen and allow hands-free operation.
* VoiceOver changes the gestures used to control iPhone. If VoiceOver is enabled, you must use the VoiceOver gestures to
control your iPhone, or disable VoiceOver. Please refer to the user's manual for your iPhone regarding the VoiceOver
operation. If you are unable to cancel VoiceOver, activate Siri and speak "VoiceOver Off" into the iPhone's microphone to
turn VoiceOver off.
* To unlock the smartphone screen, press the Home button on the Smartphone Controller two or three times. Please note that
the Home button will be disabled if you try to unlock the screen using any button other than the Home button. If the Home
button is disabled, turn off the power to the Smartphone Controller, then try to connect to the device again.
《Navigating your iPhone》
1.Moving the
cursor
Move the
Cross joystick
to the left or
right to move
the cursor
and select an
app.
2.Navigating
the Home
screen
Move the cursor
to the dock as
shown on the
left, then move
the Cross
joystick up or
down to turn
pages.
3.Using the
Rotor function
Tilt the Cross
joystick toward the
upper-left or
upper-right to
display the Rotor
and select an
option item. Then,
move the Cross
joystick up or
down to adjust the
corresponding
item, such as the
volume level, etc.
Select a Rotor
function item
Adjust the
function item
1. Select "Settings." 2. Select "General." 3. Select "Accessibility."
4. Select "VoiceOver."
5. Turn on "VoiceOver".
6. When the VoiceOver
function is enabled, a box
cursor appears over
"Accessibility."
7. Press the Home button on the
Smartphone Controller to display
the Home screen on your
iPhone. The box cursor appears
on one of the app icons.

87352⑦
/
⑧
December 17, 2014
4.Activating functions or apps
Move the cursor over the item or app that you want to execute, then press the Enter button.
5.Returning to the previous page
Press the Escape button to go back to the previous layer's page in the Settings or other screens.
6.Returning to the Home screen
Press the Home button to display the Home screen. The Home button on the Smartphone Controller offers the same functions as the
home button on the iPhone. For example, pressing the Home button twice quickly will display multi-task app icons. Pressing and holding
down the Home button will activate Siri.
CAUTION
* You may be unable to operate some apps via the Smartphone Controller. For more information on the functions of your smartphone,
please contact your local smartphone dealer. Please note that Daytona Corp. is unable to answer questions regarding smartphone
functionality.
* To unlock the screen, be sure to press the Home button on the Smartphone Controller two or three times. Please note that the Home
button will be disabled if you try to unlock the screen using any button other than the Home button. If the Home button is disabled, turn
off the power to the Smartphone Controller, then try to connect to the device again.
* If the automatic passcode lock function is turned on, you will be unable to unlock the screen via the Smartphone Controller. Turn off the
passcode lock function on your device before using the Smartphone Controller.
《Navigating your Android device》
When the device is connected and the Home screen is displayed, a small box cursor appears over the icon of one of the available apps.
This indicates that you can control your Android device via the Smartphone Controller.
1.Moving the cursor
Move the Cross joystick up and down or left and right to move the cursor.
2. Activating the functions or apps
Move the cursor over the item or app that you want to execute, then press the Enter button.
3. Returning to the previous page
Press the Escape button to go back to the previous layer's page in the Settings or other screens.
4. Returning to the Home screen
Press the Home button to display the Home screen.
* To unlock the screen, press the Home button on the Smartphone Controller two or three times.
* The Home button offers the same functions as the home button on your smartphone.
CAUTION
* The box cursor will not appear on any screens other than the manufacturer's standard Home screen. Be sure to use the
manufacturer's standard Home screen.
* You may be unable to unlock the screen via the Smartphone Controller. In this case, cancel the security protection for the
screen lock setting of your smartphone before using the Smartphone Controller. Also, with some models of connecting
devices, you may be unable to display the Home screen by pressing the Home button on the Smartphone Controller if the
device is in sleep mode. In this case, set the connecting device so that it will not enter sleep mode.
* Connecting the device via Bluetooth to the Smartphone Controller is similar to connecting the device to a keyboard.
Therefore, with some device models, the character input screen may not be displayed. If you want to display the character
input screen on your device, turn off the power to the Smartphone Controller.
* You may be unable to operate some apps via the Smartphone Controller. For more information on the functionality of your
smartphone, please contact your local smartphone dealer. Please note that Daytona Corp. is unable to answer questions regarding
smartphone functionality.
【Reconnecting the Smartphone Controller after power-off】
Turn on the power to the Smartphone Controller. The LED indicator will flash (in Android mode) or light up (in iOS mode) for three
seconds, and then it will turn off. When the LED indicator starts flashing again, press any button other than the Power button once to
connect the Smart-Controller to the device.
* Some devices may take a while to reconnect to the Smartphone Controller. If you are unable to reconnect to the
Smartphone Controller, restart the pairing operation from the beginning.
【Sleep mode】
If you do not operate the Smartphone Controller for more than five minutes while the power is on, it will enter sleep mode
automatically. To cancel sleep mode, press the Home button two or three times.
* You may be unable to cancel sleep mode by pressing the Home button just once, depending on the connected
device.
In this case, press the Home button a few times consecutively.
* If you are using the Smartphone Controller with an iOS device, be sure to press the Home button on the
Smartphone Controller to cancel sleep mode. Please note that the Home button will be disabled if you try to
cancel sleep mode using any button other than the Home button. If the Home button is disabled, turn off the
power to the Smartphone Controller, then turn it on again to connect the device. The Home button will now be
enabled.
【Button functions】
・Power button … Turns on or off the power to the Smartphone Controller.
・Enter button … Activates apps on the connected device.
・Escape button … Displays the previous page or layer on the connected device.
・Cross joystick … Moves the cursor.
・Home button … Displays the Home screen on the connected device.
* Depending on the connected device, some buttons may be disabled.
・Functions and Operations
Function Action Result
Power on Press the Power button once. The LED indicator lights up or flashes red.
Power off Press the Power button once.
Pairing Power on the Smartphone Controller. After approximately three seconds, the Smartphone Controller automatically will
enter pairing mode.
Pairing complete The Bluetooth icon on the connected device will change to indicate that a
connection has been established.
Reconnect Press any button other than the Power button. You can navigate the screen on the connected device.
CAUTION
CAUTION
CAUTION

87352⑧
/
⑧
December 17, 2014
Return to the previous
screen
(You cannot return to the
main menu.)
Press the Escape button once. Press the Escape button repeatedly to step back through previous screens one by
one.
Return to the Home screen Press the Home button once. The Home screen appears. * The operation varies depending on the functionality of
the home button on the connected device.
Confirm Press the Enter button once. The selected app will be activated.
Display multi-task icons
(iOS)
Press the Home button twice consecutively. Multi-task icons will appear.
Task Manager (Android) Press and hold down the Home button. Task Manager will appear.
Move the cursor Move the Cross joystick up/down or left/right
once.
The cursor will move.
Cancel sleep mode Press any button other than the Power button
once.
Sleep mode will be canceled, and you will be able to control the connected device
via the Smartphone Controller.
Switch OS While pressing and holding down the Home
button and Escape button simultaneously,
power on the Smartphone Controller.
If the LED indicator lights up red for three seconds when the power is turned on,
iOS mode has been selected. If the LED flashes red, Android mode has been
selected. While pressing and holding down the Home button and the Escape
button, press the Power button repeatedly to toggle between iOS mode and
Android mode.
* Depending on the characteristics, specifications, settings or environments of some connected devices, operation may
vary, or some functions may be unavailable. Also, the connected device may malfunction or become unstable.
* If the device malfunctions or the operation become unstable, turn off the power to the Smartphone Controller, then turn it
on again. Alternatively, try to perform the pairing operation from the beginning.
・Troubleshooting
Symptom Item to check Action
Power does not
turn on
Are the batteries inserted in the correct orientation? Check the polarity of the batteries.
Could the batteries be worn out? Replace the batteries with new ones.
Is the battery case lid attached securely? Attach the battery case lid firmly.
Incomplete
pairing
Is the Smartphone Controller in pairing mode? Review the pairing method and perform the pairing operation from the beginning.
Is the connecting device in pairing mode?
Check the instruction manual for the connected device.
Is the profile of the connected device compatible with
the Smartphone Controller?
Could there be other Bluetooth-enabled devices in
the vicinity? Turn off the power to all devices other than the one for pairing.
Cannot control
the connected
device.
Is the Smartphone Controller in OS mode that
matches the OS of the connected device?
Double-check the OS mode setting. If the setting is incorrect, change it
accordingly.
Check the settings on the connected device. If you are using an iOS device, turn on the VoiceOver function in the Accessibility
settings.
Could the connected device be located too far from
the Smartphone Controller?
The maximum communication distance between the Smartphone Controller and
the device is approximately 10m (Class2) of sight distance. Use the device within
10m of the Smartphone Controller.
* Even if the sight distance is less than 10m, operation of some devices may
become unstable, depending on the environment and conditions.
Could noise be generated from the vehicle? Locate the device away from the noise source. Alternatively, try to reduce the
noise level of the vehicle.
Could pairing be off? Turn off, and then turn on the power to the Smartphone Controller, or perform the
pairing operation from the beginning.
Could your device be displaying a home screen that
is not the manufacturer's original Home screen on the
connected device? (Android)
Be sure to use the manufacturer's standard Home screen.
Could the Smartphone Controller be in sleep mode?
If you do not operate the Smartphone Controller for more than five minutes, it will
enter sleep mode. To cancel sleep mode, press any button other than the Power
button two or three times.
The smartphone
does not display
the character
input panel
Could the Smartphone Controller be connected to the
smartphone?
If the Smartphone Controller is connected to the smartphone, the smartphone
will recognize the Smartphone Controller as a wireless keyboard. Therefore, on
certain device models, the character input panel will not be displayed. In this
case, turn off the power to the Smartphone Controller, or turn Bluetooth off.
・Bluetooth specifications
Version Version 3.0
Transmission output Class2
Maximum
communication
distance
Approximately 10m of sight distance. * Variable depending on the
operating environment.
Frequency band 2.4GHz (2.4000GHz - 2.4835GHz)
Supported profile HID
Device name SMARTPHONE CONTROLLER
* Even if your Bluetooth-enabled connected device conforms to Bluetooth standards as described above, the device may not be able to
communicate with other devices, depending on the characteristics and specifications of those devices.
Also, the operation, screens, or behavior of the device may vary, or it may be unable to transfer or receive data to and from other devices.
* For more information on using Bluetooth-enabled devices, please refer to the instruction manual for the corresponding device.
* Bluetooth is a registered trademark of Bluetooth-SIG Inc. in the United States.
* iPhone® and Siri® are trademarks of Apple Inc., registered in the U.S. and other countries.
CAUTION