De La Espada COMPANIONS BED User manual

0
1
S
T
U
D
I
O
I
L
S
E
PARTS
HARDWARE
(4x) Universal connector (4x) M8x40 Metal dowel
(12x) M8x30 bolts (26x) M5 bolts
(26x) M5 washers
YOU WILL NEED
-8mm socket/ratchet set OR cordless drill with the appropriate
attachment
-5mm Allen Key
-The help of a friend
NOTES
NOTE 1: Be certain that all assembly is carried out on a at
and stable surface. This will ensure a good nal result.
Reverse the steps to disassemble the piece.
NOTE 2: Your furniture arrives packed in numerous layers that
protect it during transport. It is important that you remove
the packaging carefully to avoid damaging your furniture. Refer
to our information sheet “Unpacking Your Furniture” for further
details.
NOTE 3: Great care is required when assembling our products .
Use blankets to soften the assembly surface - hard surfaces
such as wood or stone ooring may damage the furniture if in
direct contact.
NOTE 4: We advise that assembly and disassembly of De La Espada
furniture is undertaken by a minimum of 2 people.
ASSEMBLY INSTRUCTIONS
COMPANIONS BED BY STUDIOILSE
[e-mail] M
DELAESPADA.COM
1x Headboard
1x Central beam
2x Side beams
13x Timber slats
(14 for Cal King)
1x Footboard

0
2
S
T
U
D
I
O
I
L
S
E
ASSEMBLY INSTRUCTIONS CONTINUED
COMPANIONS BED
1. ATTACH HEADBOARD TO CENTRAL BEAM AND SIDEBEAMS
a) Unpack components and lay them out so they are in the cor-
rect orientation. Check for number markings.
b) Place cutout of central beam onto the cutout on the head-
beam, by slotting the wooden dowels into the corresponding
holes.
[e-mail] M DELAESPADA.COM
NOTE 5: When screwing in bolts, tighten well, but be sure
NOT TO OVERTIGHTEN. This can cause the thread to strip thus
resulting in a poor connection.
NOTE 6: All mating parts are numbered so they correspond to
the appropriate part around the frame of the bed. you will
ensure the best possible t if all parts are mated with the
corresponding numbered parts. While you work, be sure all
connections are ush with no gaps.
INSTRUCTIONS

0
3
S
T
U
D
I
O
I
L
S
E
c) Insert a Universal Connector into the rebate in the head-
board end of one sidebeam, and place a metal dowel into the
corresponding pre-drilled hole in the headboard. Guide the met-
al dowel into the Universal Connector and tighten rmly with an
Allen Key. Repeat this procedure for the second sidebeam.
ASSEMBLY INSTRUCTIONS CONTINUED
COMPANIONS BED
[e-mail] M DELAESPADA.COM
e) Insert 2x M8x30 bolts into the headboard base at each con-
nection point and tighten with an Allen Key.

0
4
S
T
U
D
I
O
I
L
S
E
ASSEMBLY INSTRUCTIONS CONTINUED
COMPANIONS BED
[e-mail] M DELAESPADA.COM
2. ATTACH FOOTBOARD
a) Prepare to attach the footboard by placing it in the correct
orientation.
b) Insert a Universal Connector into the rebate in the foot-
board end of one sidebeam, and place a metal dowel into the
corresponding pre-drilled hole in the footboard. Guide the met-
al dowel into the Universal Connector and tighten rmly with an
Allen Key. Repeat this procedure for the second sidebeam.

0
5
S
T
U
D
I
O
I
L
S
E
ASSEMBLY INSTRUCTIONS CONTINUED
COMPANIONS BED
d) Insert 2x M8x30 bolts into the footboard at each connection
point and tighten with an Allen Key.
[e-mail] M DELAESPADA.COM
c) The construction should now look like this.

0
6
S
T
U
D
I
O
I
L
S
E
ASSEMBLY INSTRUCTIONS CONTINUED
COMPANIONS BED
3. ATTACH THE TIMBER SLATS TO THE PLATFORM BASE
a) Space out the bed slats so they are aligned with the
corresponding holes on the timber lip on the inner face of
the side beams. The underside of the each slat has a threaded
sleeve xed inside. If the sleeve drops out, there are spares
you can use. The top of each slat has a recess for the washer.
b) Place a washer in the recess of each slat and insert an M5
bolt through the slat and into the sidebeam. Using a cordless
drill or socket set, tighten the bolts. Tighten the slats well,
so they are not wobbly, but be very careful not to overtighten.
[e-mail] M DELAESPADA.COM

c) The assembly is now complete and the bed is ready to receive
a mattress. 0
7
S
T
U
D
I
O
I
L
S
E
ASSEMBLY INSTRUCTIONS CONTINUED
COMPANIONS BED
[e-mail] M DELAESPADA.COM