De La Espada COMMUNE DINING TABLE BY NERI&HU User manual

0
1
N
E
R
I
&
H
U
PARTS
1x Tabletop
1x Leg frame
Hardware:
(4x) M8x20 black countersunk screws
YOU WILL NEED
-5mm Allen Key
-The help of a friend
NOTES
NOTE 1: Be certain that all assembly is carried out on a at
and stable surface. This will ensure a good nal result.
Reverse the steps to disassemble the piece.
NOTE 2: Your furniture arrives packed in numerous layers that
protect it during transport. It is important that you remove
the packaging carefully to avoid damaging your furniture. Refer
to our information sheet “Unpacking Your Furniture” for further
details.
NOTE 3: Great care is required when assembling our products .
Use blankets to soften the assembly surface - hard surfaces
such as wood or stone ooring may damage the furniture if in
direct contact.
NOTE 4: We advise that assembly and disassembly of De La Espada
furniture is undertaken by a minimum of 2 people.
NOTE 5: When screwing in bolts, tighten well, but be sure
NOT TO OVERTIGHTEN. This can cause the thread to strip thus
resulting in a poor connection.
NOTE 6: While you work, be sure all connections are ush with
no gaps.
NOTE 7: After assembly, ensure that the table is resting on a
level surface.
ASSEMBLY INSTRUCTIONS
COMMUNE DINING TABLE BY NERI&HU
[e-mail] M
DELAESPADA.COM

0
2
N
E
R
I
&
H
U
ASSEMBLY INSTRUCTIONS CONTINUED
COMMUNE DINING TABLE
INSTRUCTIONS
1) ATTACH LEG FRAME TO THE TABLETOP
a) Place the tabletop upside down a clean, soft surface such as
blanket or carpet on the oor.
b) Turn the leg frame upside down, and insert the connection
plates on the legs into the rebates on the underside of the
tabletop.
c) Insert the M8x20 black countersunk screws into the holes in
the connection plates and through the tabletop. Tighten with an
Allen key. Tighten rmly but be sure not to overtighten.
[e-mail] M DELAESPADA.COM

0
3
N
E
R
I
&
H
U
ASSEMBLY INSTRUCTIONS CONTINUED
COMMUNE DINING TABLE
[e-mail] M DELAESPADA.COM
d) The assembly should now look like this.
2) TURN THE TABLE INTO AN UPRIGHT POSITION
a) With the help of a friend, carefully turn the table over
into an upright position, taking care not to place any weight/
force on the table legs while turning.
b) The assembly is now complete and the table is ready for use.