De La Espada ARMSTRONG SOFA User manual

0
1
M
A
T
T
H
E
W
H
I
L
T
O
N
PARTS
HARDWARE
16x M6x25 bolts
YOU WILL NEED
5mm heavy duty Allen Key
The help of a friend
NOTES
NOTE 1: Be certain that all assembly is carried out on a at
and stable surface. This will ensure a good nal result.
Reverse the steps to disassemble the piece.
NOTE 2: Your furniture arrives packed in numerous layers that
protect it during transport. It is important that you remove
the packaging carefully to avoid damaging your furniture. Refer
to our information sheet “Unpacking Your Furniture” for further
details.
NOTE 3: Great care is required when assembling our products .
Use blankets to soften the assembly surface - hard surfaces
such as wood or stone ooring may damage the furniture if in
direct contact.
NOTE 4: We advise that assembly and disassembly of De La Espada
furniture is undertaken by a minimum of 2 people.
NOTE 5: When screwing in bolts, tighten well, but be sure
NOT TO OVERTIGHTEN. This can cause the thread to strip thus
resulting in a poor connection.
NOTE 6: While you work, be sure all connections are ush with
no gaps.
ASSEMBLY INSTRUCTIONS
ARMSTRONG SOFA BY MATTHEW HILTON
SALES@DELAESPAD A.C O M
DELAESPADA.COM
1x Sofa body
4x Legs

0
2
M
A
T
T
H
E
W
H
I
L
T
O
N
ASSEMBLY INSTRUCTIONS CONTINUED
ARMSTRONG SOFA
1) ATTACH FEET
a)Place the sofa body face down on a soft blanket on the oor.
b)Locate the pre-drilled holes on the underside of the sofa
body.
c)Place one of the feet against the underside of the sofa body,
aligning the holes in each component. Insert an M6x25 bolt into
each hole and tighten rmly with a 5mm Allen Key. Be careful
not to overtighten. Repeat for each foot until complete.
2) TURN THE SOFA INTO AN UPRIGHT POSITON
a) With the help of a friend, turn the sofa so it is in a
natural upright position. Be careful to avoid allowing the sofa
to rest on one or two legs while turning as this may damage the
connection. The sofa is now ready for use.
SALES@DELAESPAD A.C O M DELAESPADA.COM