decoflame DENVER E-RIBBON BASIC 720 User manual

www.decoflame.com
DENVER E-RIBBON BASIC™
720mm - 920mm - 1120mm
Decoame Technical Information
Features
• e-Ribbon™technology
• Safetysensors/Safetychamber
• FuelLevelIndicator/FlameLevelIndicator
• Remotecontrol
• Bluetooth/App
• 6amelevels(1-5+ECO-Wave)
• Nochimneyrequired-nosmoke,ashorsoot
720mm 920mm 1120mm
Flametray size 500mm 700mm 900mm
Capacity 4L 5,8L 7,2L
Fuel consumption 0,3-0,6l/h 0,4-0,8l/h 0,6-1l/h
Burning time 7-20h 7,5-20,8h 7,3-20h
Heat output 1,2-3,2kWh 1,6-4,3kWh 2,1-5,7kWh
Net weight 19,5kg 22kg 26kg
Minimum
room size
64m389m3115m3
Powersupply:220V-240V,50Hz
technical inFormation
Denvere-RibbonBasic,isanautomaticburneravailableinthreestan-
darddimensions.
Featuringthee-RibbonFire™burningsystem,Denvere-RibbonBasicis
suitableforvariousreplaceapplications,eitherasadrop-downburner
invariousnonamablematerialsorintegratedinbuilt-inmodelssuchas
theMontrealandOrlando.
Itiseasytooperatewitheiterremotecontroloronthecontrolpaneland
viatheDecoameApp,aswell.
Bioethanol
For use and information about bioethanol, please visit our webiste decoame.com.
(Please be aware that bioethanol is essential to a proper use and gurantee of your product).
A
F
C D
E
B
Decoamestronglyrecommendsinstallingoneormoreglassshields
inordertoprotecttheamefromdraught,whilekeepingitvivid.
ThemodelcomesstandardwithglassasinversionA.
ItispossibletoordermoreglassesforversionB-F.
InversionCandF,itisonlypossibletoorderthesmallendglass-if
thetopplateisminimum300mmindepth.
toP Finish
• Standard:Blackpowdercoatedtop-plate
• Optional:StainlesssteelandanyRALcolour
• Request:Othernishes/materials
Glass
• Standard:One80mmhighdiamondclearglassscreen.
• Optional:Additionalglassscreen.

L720mm/920mm/1120mm
L682mm/882mm/1082mm 177mm
ControlPanel
On/Off
Adjusttheameleveldown
215mm
125mm
123456
min.300mm
min.1000mm min.1000mm
min.50mm
HeatZone-Upto50C
UseAppropiateMaterial
dimensions:
Flamelevelindicator1-5+
ECO-Wave
Fuellevelindicator
START/STOPthereplace
Adjusttheamelevelup
ServiceUSB
attention:
www.decoflame.com

1. Download and install the Decoame App
correspondingto yoursmart device’s operat-
ingsystem.Formoreinformationgoto:
decoame.com.
4.Onceyouhaveselectedyourreplace,you
canturnitonbypressing‘START’.Ifthere-
place has already been turned on using the
control panel, you can now monitor the fuel
levelandtheconsumption.
5.Forthe‘TurnO󰀨Timer’presstheclockicon
inthelowerrightcorner.Toadjusttheremain-
ingtime,slidethedottotheleftandrightand
select ‘SET TIMER’. The remainig burning
timecanbechangedbyrepeatingtheabove
mentioned steps. To cancel the timer select
‘CLEARTIMER’.
6. For adjusting the ame intesity, select the
desired level on the left side of the screen.
(1-lowest,6-highest)
Shouldtherenotbeenoughfuelfortheselect-
edburningtime-thereplacewillshutdown
automatically.
Select‘STOP’toturno󰀨thereplace.
2. In order to pair your replace with your
smart device, start the replace by pressing
the‘ON’button.
StarttheAppandchooseyourreplace.
Insert the code from YOUR rating plate, like
theonehighlightedabove.
3. Once your device is paired, the replace
should be visible on the app.  You are now
abletochangethenameofthereplace.
Note:Youareabletopairmorethanonere-
placelikedescribedinthestepnr.2andgive
themdi󰀨erentnames.
Installation of Decoame App to the Denver e-Ribbon Basic burner
ControlPanel Flamelevelindicator
1-5+ECO-Wave
Fuellevelindicator
START/STOPthereplace
Adjusttheamelevelup
ServiceUSB
Step1 TurnontheelectronicsofyourDenvere-RibbonBasic™bypressingthebutton.
Step2 Fillintherightamountofbioethanolinthefueltankbyverifyingthelevelonthefuellevelindicator.
Step3 Toignitionthereplace.Pressthe buttononthecontrolpanel.
Afterabout3minutes,therstameswillappeararoundthecentreoftheametray.
Step4 Whenthelamentisnolongerred(approx.10min)itispossibletoadjusttheames.
Step5 Toswitcho󰀨thereatanytime–alsoduringthewarming-upphase–pressthebuttononthe
controlpanel.Theameswilldisappearwithinafewminutes.
On/Off
Adjusttheameleveldown
Fueltank
Usethesuppliedremote
controlor download the
Decoame App to your
mobile device for con-
trollingthebioreplace.
Filament
Operating:
Subject to typing errors, typos and technical faults, production- and product tolerances. Decoame ApS reserves the right to make changes without notice. We refer to Decoames Ordinary Terms and Conditions.
www.decoflame.com