Decon wheel MEM6153 User manual

2019-05-24
Assembly instructions for Etac Cross5
MEM6153 and MEM6154
1. Remove wheels and brakes.
2. Check the correct placement for the eMove, and that it is axle Ø12,0 x 51 with
Part Number: XOE-2530E-BO and Spacer with Part Number: XOE-25383-00.
12
13

2019-05-24
3. Assembly the plate (right side) according to picture.
Placement Options:
It can be mounted in all rows vertically and horizontally, but only the center located in
the respective holes in the frame.
Note! The bracket can be placed in the front column, if you use the left bracket on the
right side and the right bracket on the left side, see the right picture above.

2019-05-24
Parts for right side mounting:
Item No. Part Number Qty Description
1 XSM8X40 1 Screw Round M8 x 40
2 XSM8ML 1 Nut Self-Locking M8
3 405239 1 Nordlock Washer
4 MED3100-02 1 Plate Cross5
5 HW063 1 Hub sleeve
6 XOE-22294-BO 1 Right Bracket
7 MED3100-01 1 Plate Cross5
8 100 400 084 1 Spacer Cross5
9 100 400 083 1 Spacer Cross5
10 MED3100-03 2 Spacer Plate
11 MED3100-04 2 Spacer Plate
12 XOE-25383-00 1 Spacer
13 93440-120520 1 Circlip
Note! If you only order the mounting set, the axle, axle spacer and the circlip are not
included, for replacement see the service manual.

2019-05-24
4. Now you can assemble the backrest battery bag on the back or as an alternate
assembly as the pictures bellow.
Note!
Read the User manual before that you use the product. Do this and you get all
information about the products warnings and notes for the operation.