Decon wheel MED3171 User manual

2018-05-31
Assembly instructions for Findus 2018 -
MED3171
1. Remove wheels on both sides.
2. Check the correct placement for the stop pin.

2018-05-31
3. Assembly the plate (right side) according to picture.
Parts pair mountingset:
Item No. Part Number Qty Description
1 100 400 036 2 Spacer
2 100 400 037 2 Spacer
3 MED2000 1 Bracket
4 HW069 1 Hubsleever M16x1/12,7
5 100 400 017 1 Spacer
6 405239 1 Nordlock Washer M16
7 XSM16FJ 1 Single Coil Washer M16
8 XSM16M 1 Nut M16X1 Low
9 XSM8BR 2 Plain Washer M8
10 XSM8X35 1 Screw M8 x 35
11 XSM8LM 1 Locknut M8
12 100 400 001 1 Spacer
13 100 400 004 1 Spacer
4. Assemble the back placed battery bag.

2018-05-31
Joysticks Assembly Alt. 1
MED1539
Item No. Part Number Qty Description
1 XSM6ML 2 Nut Self-Locking M6
2 XSM6X16 2 Screw Round M6 x 16
3 X0F-48160-D00 1 Swing Away Bracket
4 XSM6X12 4 Screw Round M6 x 12
5 MED1535 1 Main plate
6 MED1536 1 Support Lid
Joysticks Assembly Alt. 2
MED1540
Item No. Part Number Qty Description
1 XSM6ML 2 Nut Self-Locking M6
2 XSM6X16 2 Screw Round M6 x 16
3 XSM6X12 4 Screw Round M6 x 12
4 MED1535 1 Main plate
5 XOC-48160-C0 1 Upper holder assembly 2
6 MED1536 1 Support Lid

2018-05-31
Assembly of Assistant Controller
MED1218
Item No. Part Number Qty Description
1 XOC-2612K-01 Drilled 6,2 1 Clamp with drilled hole 6,2 mm
2 XOC-2612E-01 1 Clamp with hole
3 XSM6X50 1 Screw M6 x 50
4 XSM6BR 1 Plain Washer 6,4
5 XSM6TG 1 Turn Washer 6,4
6 MED1200 1 Assist controller