Decon wheel MED3056 User manual

2020-11-16
Assembly instructions for BasiX²/ RubiX / RubiX²,
HeliX/HeliX2with one arm drive or drumbrakes.
MED3056
1. Remove wheels and sleeves on both sides.
2. Check the correct placement for the stop pin and check that the battery box and antitip
devices are removed. The wheelchair shall be equipped with original antitip devices
and the side cover must be placed into the front holes.
3. The handle will be placed on the inside, next to the tire. (See picture above to the left.)

2020-11-16
4. Assembly the plate (right side) according to picture, there are some adjustment options
for the plate.
1. Parts pair mountingset (one side):
Item No. Part Number Qty Description
1 100 400 004 1 Spacer
2 100 400 007 2 Spacer
3 100 400 017 1 Spacer 18x16x3
4 405239 1 Nordlock washer
5 HW069 1 Hubsleever M16x1/12,7
6 XSM8X40 1 Screw M8 x 40
7 MED 2004 1 Bracket
8 XSM8BR 1 Plain Washer 8,4
9 XSM16M 1 Nut M16
10 XSM8ML 1 Lock nut M8
Back rested battery bag 1 Battery Bag
2. Assemble the back rested battery bag on the wheelchair.

2020-11-16
MED1596
Item No. Part Number Qty Description
1 XSM6ML 2 Nut Self-Locking M6
2 XSM6X16 2 Screw Round M6 x 16
3 X0F-48160-D00 1 Parallel Bracket
4 MED1565R 1 Bracket Rightside
3. Assemble the joystick with the parallel bracket.
MED1597
Item No. Part Number Qty Description
1 MED1565R 1 Bracket Rightside
2 XSM6ML 2 Nut Self-Locking M6
3 XSM6X16 2 Screw Round M6 x 16
4 XOC-48160-C0 1 SwingAway Bracket
4. Assemble the joystick with the swing away bracket.

2020-11-16
MED1201
Assembler instructions for Attendant control unit MED1200
1. Before you start, check what type of clamp you need.
2. Assemble the attendant control unit according to picture.
3. Connect the cable.
Parts pair mountingset:
Item No. Part Number Qty Description
1 XSM6BR 2 Washer Plain M6
2 XSM6X35 or XSM6X20 1 Screw Round M6
3 X-klamma1 or X-klamma2 1 Clamp

2020-11-16
Åtdragningsmoment / Tightening torque
Metriska grovgängor, stål.
Metric coarse threads, steel.
Gänga / Thread
Åtdragningsmoment / Tightening torque
M3
1,2 Nm
M4
3 Nm
M5
6 Nm
M6
10 Nm
M8
25 Nm
M10
50 Nm
M12
85 Nm
Navhylsor.
Sleeves.
Gänga / Thread
Åtdragningsmoment / Tightening torque
M16x1
30 Nm
M18x1
40 Nm