DeFelsko PosiTector SHD Standard User manual

Introduction
This Reference is a compilation of the On-Gage Help that is available on your
PosiTector gage. To view these help items on the gage, enter the gage menu and touch
the icon or press the button with the desired menu item selected.
For an overview of the use and operation of your instrument, refer to its included
Instruction Manual or download a digital PDF at www.defelsko.com/manuals.
Update your gage to ensure your PosiTector includes these latest help references.
Instructions are available at www.defelsko.com/updates.

Page 1
Contents
Memory ........................................................................................................................
View .......................................................................................................................
Off ..........................................................................................................................
On ..........................................................................................................................
Clear ......................................................................................................................
Statistics ......................................................................................................................
Statistics ................................................................................................................
Clear ......................................................................................................................
HiLo Alarm .............................................................................................................
Calibration Settings ......................................................................................................
1 Pt Adjust .............................................................................................................
Cal Reset ...............................................................................................................
Setup ...........................................................................................................................
Set Clock ...............................................................................................................
Reset .....................................................................................................................
Battery Type ..........................................................................................................
Sound ....................................................................................................................
Continuous Reading ..............................................................................................
Touch .....................................................................................................................
Backlight ................................................................................................................
Flip Lock ................................................................................................................
Language ...............................................................................................................
Gage Info ...............................................................................................................
Hi Res ....................................................................................................................
Auto Ignore 20/90 ..................................................................................................
Test Time ...............................................................................................................
Connect .......................................................................................................................
USB .......................................................................................................................
Sync.net Now ...................................................................................................
USB Drive ........................................................................................................
JSON Files .................................................................................................
HTML Report .............................................................................................
Auto Sync .net .................................................................................................
Updates .................................................................................................................
Help .............................................................................................................................
Power Off .....................................................................................................................
2
2
2
2
2
3
3
3
3
4
4
5
6
6
6
7
7
7
7
7
8
8
8
8
8
8
9
9
9
9
10
10
10
10
11
12

Page 2
Memory
The PosiTector SHD Standard has internal memory storage for recording measurement
data. Stored measurements can be reviewed on-screen or downloaded to a computer.
Measurements are date and time-stamped. Store up to 1000 readings (per probe) into a
single batch.
The memory icon appears and basic statistics are displayed when the Gage is set to
store measurement data.
NOTE:
Remove the last reading by pressing (-).
View
Use the Up or Down buttons to scroll through information, statistical summary, and a list
of each reading in the currently opened batch. Press the center navigation button to
exit.
Off
Turns memory off and stops recording (stored readings remain in memory)
On
Turns memory on and begins recording measurements.
Clear
Removes all stored readings from memory.

Page 3
Statistics
Menu option for configuring Statistics and HiLo Alarm modes.
Statistics
A statistical summary will appear on the display. Remove the last reading by pressing
the (-) button. Press (+) to clear statistics.
Clear
Clears all on-screen Statistics and HiLo tabulations.
HiLo Alarm
Allows Gage to visibly and audibly alert the user when readings exceed user-specified
limits.

Page 4
Calibration Settings
Two steps ensure best accuracy:
1.Calibration - typically performed by the manufacturer. All probes include a Certificate
of Calibration.
2.Verification of Accuracy - typically performed by the user on known reference
standards such as the included test block.
Calibration
Calibration is the high-level, controlled and documented process of measuring traceable
calibration standards over the full operating range of the probe, and verifying that the
results are within the stated accuracy of the probe. Calibrations are performed by the
manufacturer, their authorized agent, or by an accredited calibration laboratory in a
controlled environment using a documented process.
Verification
Verification is an accuracy check performed by the user on known reference standards.
A successful verification requires the Gage to read within the combined accuracy of the
probe and the test block. Instrument operation may be verified with the included test
block. Place the test block on a flat, hard surface and take three to five readings. The
measurement points should be at least 6 mm (0.24”) apart. If the average of those
readings is outside the combined accuracy of the test block and gage, the gage may
require service.
Some causes for the gage to not read properly are the indentor being damaged,
incorrect pressure being applied to the test block or temperatures beyond normal
conditions.
Verify accuracy at the beginning and the end of each work shift. During the work shift, if
the Gage is dropped or suspected of giving erroneous readings, its accuracy should be
re-verified.
1 Pt Adjust
Adjusts the Gage to a known material hardness.
Press the (+) button to select the number of readings to be used to obtain an average,
typically 3 to 10 readings. The greater the variation between readings, the more
readings should be taken to obtain an average.
Repeatedly measure the known hardness sample using the on-screen green arrows as
a guide. After the final reading, the Gage will calculate and display an average
measurement value of all readings taken on the sample. If the expected hardness value
is not obtained (within tolerance), adjust the displayed value up (+) or down (-) to the

Page 5
known hardness value and press the center navigation button to enter the value.
Cal Reset
Restores the Gage back to factory calibration. The factory calibration icon will appear on
the display.

Page 6
Setup
Set configuration options for the Gage.
Set Clock
All measurements are date and time stamped (24 hour format) when stored into
memory. It is therefore important to keep both the date and time current using this menu
option. Use the Up and Down buttons to scroll, and the (-) and (+) buttons to adjust
value. The Gage’s date and time can also be viewed in Gage Info and on top of the
main menu.
Reset
Restores factory settings and returns the Gage to a known condition. The following
occurs:
All batches, stored datasets, batch names and screen captures are erased.
Calibration adjustments are returned to the Gage’s factory settings. The factory
calibration icon will appear on the display.
Menu settings are returned to the following:
Memory = OFF
Auto Sub-Batch = OFF
Statistics Mode = OFF
HiLo Alarm = OFF
Hi Res = OFF
Bluetooth & Stream = OFF
BLE Keyboard = OFF
WiFi & Access Point = OFF
USB Keyboard & Stream = OFF
Auto Ignore 20/90 = OFF
Auto Dim = ON
Perform a more thorough Hard Reset by powering down the Gage, waiting several
seconds, then simultaneously holding both the center navigation and (+) buttons until
the Reset symbol appears. This returns the instrument to a known, out-of-the-box
condition. It performs the same function as a menu Reset with the addition of:
Bluetooth Pairing info is cleared. Menu settings are returned to the following status:

Page 7
Bluetooth Smart = OFF
Test Time = 1 second
Sound = Medium
Backlight = Normal
Flip Lock = OFF
Touch = ON
Auto Sync .net = ON
USB Drive = ON
Language = English
Battery Type = Alkaline
NOTE:
Date, Time and WiFi are not affected by either Reset.
Battery Type
Selects the type of batteries used in the Gage from a choice of Alkaline, Lithium or
NiMH (nickel-metal hydride rechargeable). The battery state indicator symbol is
calibrated for the selected battery type. No damage will occur if the battery type used in
the Gage does not match the selected battery type.
Sound
Adjusts the volume of built-in speaker (Off, Low, Medium, High).
Continuous Reading
When enabled, the Gage will continuously display probe readings. Ideal when a test
timer is not required or when performing a calibration verification. Continuous Reading
mode is not available when Memory, Statistics or HiLo Alarm modes are enabled.
Touch
Allows the touch screen functionality to be disabled. All gage functions can also be
controlled using the navigation buttons.
Backlight
Selects display brightness (Sun, Normal or Night). If Auto Dim is enabled (default), the
display dim slightly after a period of no activity to conserve battery life. Press the Down
button to brighten the display.

Page 8
Flip Lock
Disables the Auto Rotate feature by locking the display in its current orientation.
Language
Converts displayed and printed words to the selected language.
Gage Info
Displays the model number and serial number, probe type and serial number,
PosiSoft.net registration key, the amount of remaining memory for storage of readings,
date and time, and software packages.
For security purposes, the registration key is required to add the Gage to your free
PosiSoft.net account.
Hi Res
Increases the displayed Gage resolution to 0.1.
NOTE:
Gage accuracy is not affected.
Auto Ignore 20/90
According to most international standards, readings below 20 and above 90 are not
considered reliable. When enabled, measurement results outside 20/90 will emit a low
tone and will not be included in Memory or Statistics.
NOTE:If values above 90 Shore A are measured, the PosiTector SHD D probe should
be used. If values below 20 Shore D are measured, use the PosiTector SHD A probe.
Test Time
The PosiTector SHD has an on-screen timer to measure the hardness of a material
after a given period of time as defined by international standards, typically 1, 3 or 15
seconds.
Use the (-) and (+) buttons to adjust the test duration. When taking a reading, the timer
starts automatically once the presser foot is on the surface and the ▼ symbol appears
on the display.

Page 9
Connect
Configure communication and connection options for the Gage.
USB
Connect the Gage to a PC/Mac using the supplied USB-C cable. View and print
readings and graphs with universal web browsers/file explorers or using PosiSoft
Desktop.
NOTE:
While connected, power is supplied through the included USB-C cable. The batteries
are not used and the body will not automatically power down.
Sync.net Now
When selected, the Gage immediately synchronizes stored measurement data to
PosiSoft.net (USB connection required to a computer running PosiSoft Desktop).
Alternatively, select Auto Sync.net from within the USB connect menu to automatically
synchronize upon connection to a PC. Additional measurements added to memory
while connected are synchronized only when the USB cable is disconnected and
reconnected, or when the Sync.net Now option is selected.
NOTE:
PosiSoft Desktop is required when using USB connections to synchronize
measurements with PosiSoft.net.
USB Drive
When USB Drive is enabled, the PosiTector is recognized as a USB mass storage
device which provides a simple interface to retrieve stored data in a manner similar to
USB flash drives and digital cameras. USB Drive is also required to import stored
measurements into PosiSoft Desktop. Once connected, any computer can view
measurements stored in memory by navigating a virtual drive labeled PosiTector using
the supplied USB-C cable.
NOTE:
While connected, power is supplied through the included USB-C cable. The batteries
are not used and the body will not automatically power down.

Page 10
JSON Files
When enabled (default), JSON schema files will be available in PosiSoft USB drive.
Files can be parsed in to databases and custom software applications.
NOTE:
Disabling this option may reduce the time required for the computer to recognize the
PosiTector when first connected via USB.
HTML Report
When enabled (default), a formatted HTML report is viewed by selecting the index.html
or START_HERE.html file found in the root directory. Optionally, text (.txt) files located
in each batch folder provide access to measurement values. Stored readings and
graphs can be viewed or copied using universal web browsers or file explorers.
NOTE:
Disabling this option may reduce the time required for the computer to recognize the
PosiTector when first connected via USB.
Auto Sync .net
When enabled, measurements will automatically synchronize with PosiSoft.net when
connected to a computer running PosiSoft Desktop. Additional measurements added to
memory while connected are synchronized only when the USB cable is disconnected
and reconnected, or when the Sync.net Now option is selected.
NOTE:
PosiSoft Desktop is required when using USB connections to synchronize
measurements with PosiSoft.net.
Updates
Determines if a software update is available for your Gage.
To perform an update the Gage must be connected to an internet connected computer
running PosiSoft Desktop.
See www.defelsko.com/update
WARNING:
The Gage will perform a Hard Reset after an update. All stored measurements will be
erased from memory.

Page 11
Help
When a Menu option is highlighted, the (i) icon indicates on-gage help is available.
Press (+) or touch the (i) icon to display the help. Update your gage to ensure that you
have the latest on-gage help information.
A formatted PDF containing all on-gage help items is available at
www.defelsko.com/help.
Menu Operation
To access the Menu, power-up the gage, then press the center navigation button. Either
the keypad or touch screen can be used to navigate the menu. If desired, touch screen
functionality can be disabled within the Setup > Touch menu.
Select a menu option by touching it, or use the Up and Down buttons to highlight the
desired option and press the center navigation button to select it.
On menus longer than one page, the current page number is displayed below the menu
name. Navigate between pages using the Up button when the first menu item is
selected, or Down button when the last menu item is selected. If using touch, navigate
between pages by touching the left or right arrow, or by swiping up or down.
Press the (-) button or swipe right to return to a previous screen. Select Exit to close the
Menu.
A menu option with a > indicates that a sub-menu exists for the Menu option. Select
the option to display its sub menu.
Screen Capture
Press both (-) and (+) buttons simultaneously to save an image of the current display.
The last 100 screen captures are stored in memory and can be accessed when
connected to a computer via PosiSoft USB Drive.

Page 12
Power Off
To conserve battery life, the gage will automatically go to sleep after 5 minutes of
inactivity and enter Sleep Mode. While in Sleep Mode the gage powers up significantly
faster— convenient when moving between parts or locations. The gage will completely
power off after 4 hours of inactivity. Alternatively, select Power Off from the main menu.
All settings are retained.