DeFelsko PosiTest DFT User manual

Combo:measures on all metals.
he letter “F” (ferrous, e.g. steel)
or “N” (non-ferrous, e.g.
aluminum) is displayed with
each reading depending on the
substrate. Gage automatically
recognizes the substrate.
Fe ous:measures on steel only.
he letter “F” is always displayed.
Operation: Press either button to power-up.
Place flat on surface. Hold steady. When
measurement is obtained, new reading flashes.
Lift gage or leave on the surface for repeated
measurements.
Menu: Press both buttons simultaneously
to access the gage menu. Navigate the menu
using the buttons. Press both buttons to
select:
Exit menu and return to main screen
Switch Measu ement Units
Ze o Calib ation Adjustment:Measure the
uncoated part. Zeroing provides the best
coating thickness accuracy.
1 Point Calib ation Adjustment: Also
known as ‘Offset’ or ‘Correction Value.’
Measure a known thickness. Adjust the reading
up or down using the gage buttons until
expected thickness is displayed. Press
to accept.
Coating Thickness Gage
Instruction Manual v. 4.0
mils
µm
0
1
-+
-+
-+
-
+
Reset:Restore factory calibration, units,
and screen rotation settings. Handy when
an uncoated part is not available for zeroing.
Indicates that the gage is in factory
calibration
B ightness:Use or buttons to adjust
screen brightness.
Auto Rotate Lock
Powe -down the gage
Ave age:Select to display a running
average of up to 99 readings. he
following icons will be displayed in gage menu:
Delete Last Reading: select to delete the last
reading from average. Shortcut: Press
Clea :select to clear running average.
Shortcut: Press
Off:urn off Average
Shims: Included plastic shims provide a quick
operational check. Also used for protection on
tacky, rough or hot surfaces.
Battery Indicator: Replace AAA Alkaline
batteries when indicator turns RED.
Range: 0-40 mils 0-1000 µm
Accuracy: +/- (0.1 mils + 3%) +/- (2µm + 3%)
DeFelsko’s sole warranty, remedy and liability
are the express limited warranty, remedy, and
limited liability that are set forth on its website:
www.defelsko.com/terms
X
X
X
F
X
-+
-
+