Dell EMC 6WDJR Manual

Dell EMC PowerEdge R340
Installation and Service Manual
Regulatory Model: E58S Series
Regulatory Type: E58S001
Questo manuale d’istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per Dell PowerEdge
R340 6WDJR o cerca il tuo prodotto tra le migliori offerte di Server

Notes, cautions, and warnings
NOTE: A NOTE indicates important information that helps you make better use of your product.
CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.
WARNING: A WARNING indicates a potential for property damage, personal injury, or death.
© 2018 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks
may be trademarks of their respective owners.
2018 - 12
Rev. A00

Contents
1 About this document...................................................................................................................................... 7
2 Dell EMC PowerEdge R340 system overview................................................................................................ 8
Front view of the system.................................................................................................................................................. 8
Control panels...............................................................................................................................................................9
Rear view of the system..................................................................................................................................................10
Inside the system...............................................................................................................................................................11
Locating the information tag of your system.................................................................................................................11
System Information label..................................................................................................................................................12
PowerEdge R340 – System Information Label.......................................................................................................12
3 Initial system setup and conguration.......................................................................................................... 16
Setting up your system....................................................................................................................................................16
iDRAC conguration.........................................................................................................................................................16
Options to set up iDRAC IP address.........................................................................................................................16
Log in to iDRAC...........................................................................................................................................................17
Options to install the operating system..........................................................................................................................17
Methods to download rmware and drivers............................................................................................................17
Downloading drivers and rmware........................................................................................................................... 18
4 Pre-operating system management applications.......................................................................................... 19
Options to manage the pre-operating system applications.........................................................................................19
System Setup....................................................................................................................................................................19
Viewing System Setup...............................................................................................................................................19
System Setup details.................................................................................................................................................20
System BIOS.............................................................................................................................................................. 20
iDRAC Settings utility................................................................................................................................................ 38
Device Settings.......................................................................................................................................................... 38
Dell Lifecycle Controller...................................................................................................................................................38
Embedded system management..............................................................................................................................38
Boot Manager...................................................................................................................................................................39
Viewing Boot Manager..............................................................................................................................................39
Boot Manager main menu........................................................................................................................................ 39
One-shot UEFI boot menu........................................................................................................................................39
System Utilities...........................................................................................................................................................39
PXE boot...........................................................................................................................................................................39
5 Installing and removing system components.................................................................................................41
Safety instructions............................................................................................................................................................41
Before working inside your system.................................................................................................................................41
After working inside your system....................................................................................................................................41
Recommended tools........................................................................................................................................................42
Contents 3

Front bezel........................................................................................................................................................................ 42
Removing the optional front bezel...........................................................................................................................42
Installing the optional front bezel............................................................................................................................. 43
System cover....................................................................................................................................................................43
Removing the system cover.....................................................................................................................................43
Installing the system cover....................................................................................................................................... 44
Air shroud..........................................................................................................................................................................45
Removing the air shroud...........................................................................................................................................45
Installing the air shroud............................................................................................................................................. 46
Cooling fans...................................................................................................................................................................... 47
Removing the cooling fan blank............................................................................................................................... 47
Installing the cooling fan blank..................................................................................................................................47
Removing a cooling fan............................................................................................................................................. 48
Installing a cooling fan............................................................................................................................................... 49
Drives................................................................................................................................................................................ 50
Removing a drive blank............................................................................................................................................. 50
Installing the drive blank.............................................................................................................................................51
Removing the drive carrier........................................................................................................................................ 51
Installing the drive carrier..........................................................................................................................................52
Removing the drive from the drive carrier..............................................................................................................53
Installing the drive into the drive carrier..................................................................................................................54
Removing a 2.5 inch drive from the 3.5 inch drive adapter..................................................................................55
Installing a 2.5 inch drive into the 3.5 inch drive adapter......................................................................................56
Intrusion switch................................................................................................................................................................ 57
Removing the intrusion switch.................................................................................................................................57
Installing the intrusion switch................................................................................................................................... 58
System memory............................................................................................................................................................... 59
System memory guidelines....................................................................................................................................... 59
General memory module installation guidelines......................................................................................................60
Removing a memory module.....................................................................................................................................61
Installing a memory module...................................................................................................................................... 62
Expansion cards and expansion card risers.................................................................................................................. 63
Expansion card installation guidelines......................................................................................................................63
Removing the expansion card riser......................................................................................................................... 65
Installing the expansion card riser............................................................................................................................66
Removing an expansion card from the expansion card riser................................................................................68
Installing an expansion card into the expansion card riser....................................................................................69
Storage controller card.....................................................................................................................................................71
Removing the PERC card..........................................................................................................................................71
Installing the PERC card............................................................................................................................................ 71
System battery ................................................................................................................................................................72
Replacing the system battery...................................................................................................................................72
Optional internal USB memory key................................................................................................................................ 74
Replacing the optional internal USB memory key..................................................................................................75
Optional optical drive.......................................................................................................................................................75
4Contents

Removing the optical drive....................................................................................................................................... 75
Installing the optional optical drive...........................................................................................................................76
Processor and heat sink.................................................................................................................................................. 77
Removing the heat sink............................................................................................................................................. 77
Removing the processor........................................................................................................................................... 78
Installing the processor..............................................................................................................................................79
Installing the heat sink...............................................................................................................................................80
Optional IDSDM or vFlash module..................................................................................................................................81
Removing the optional IDSDM or vFlash card........................................................................................................ 81
Installing optional IDSDM or vFlash card.................................................................................................................82
Removing the MicroSD card.................................................................................................................................... 82
Installing the MicroSD card.......................................................................................................................................83
M.2 SSD module.............................................................................................................................................................. 84
Removing the M.2 SSD module...............................................................................................................................84
Installing the M.2 SSD module................................................................................................................................. 85
Drive backplane................................................................................................................................................................86
Drive backplane..........................................................................................................................................................86
Removing the drive backplane................................................................................................................................. 87
Installing the drive backplane................................................................................................................................... 88
Cable routing.................................................................................................................................................................... 90
Power supply unit............................................................................................................................................................. 91
Hot spare feature........................................................................................................................................................91
Removing a power supply unit blank........................................................................................................................91
Installing a power supply unit blank......................................................................................................................... 92
Removing a power supply unit................................................................................................................................. 92
Installing a power supply unit....................................................................................................................................93
Power distribution board.................................................................................................................................................94
Removing the power distribution board..................................................................................................................94
Installing the power distribution board....................................................................................................................95
System board................................................................................................................................................................... 96
Removing the system board.....................................................................................................................................96
Installing the system board.......................................................................................................................................98
Trusted Platform Module...............................................................................................................................................100
Upgrading the Trusted Platform Module...............................................................................................................100
Initializing TPM for BitLocker users........................................................................................................................ 101
Initializing the TPM 1.2 for TXT users.................................................................................................................... 102
Initializing the TPM 2.0 for TXT users................................................................................................................... 102
Control panel...................................................................................................................................................................102
Removing the left control panel............................................................................................................................. 102
Installing the left control panel................................................................................................................................103
Removing the right control panel...........................................................................................................................104
Installing the right control panel............................................................................................................................. 105
6 Jumpers and connectors ........................................................................................................................... 107
System board connectors............................................................................................................................................. 108
System board jumper settings...................................................................................................................................... 109
Contents 5

Disabling forgotten password........................................................................................................................................ 110
7 Technical specications............................................................................................................................... 111
Chassis dimensions......................................................................................................................................................... 112
System weight.................................................................................................................................................................113
Processor specications.................................................................................................................................................113
PSU specications.......................................................................................................................................................... 113
Cooling fans specications.............................................................................................................................................113
System battery specications........................................................................................................................................114
Expansion card riser specications............................................................................................................................... 114
Memory specications....................................................................................................................................................114
Storage controller specications................................................................................................................................... 114
Drive specications.........................................................................................................................................................115
Drives..........................................................................................................................................................................115
Optical drives.............................................................................................................................................................115
Ports and connectors specications.............................................................................................................................115
USB ports specications..........................................................................................................................................115
NIC ports specications........................................................................................................................................... 116
Serial connector specications................................................................................................................................116
VGA ports specications..........................................................................................................................................116
IDSDM module...........................................................................................................................................................116
Video specications........................................................................................................................................................ 116
Environmental specications..........................................................................................................................................117
Standard operating temperature.............................................................................................................................118
Expanded operating temperature............................................................................................................................118
Particulate and gaseous contamination specications.........................................................................................119
8 System diagnostics and indicator codes .....................................................................................................121
System health and system ID indicator codes.............................................................................................................121
iDRAC Direct LED indicator codes............................................................................................................................... 122
NIC indicator codes........................................................................................................................................................122
Power supply unit indicator codes................................................................................................................................123
Drive indicator codes......................................................................................................................................................124
Using system diagnostics.............................................................................................................................................. 125
Dell Embedded System Diagnostics.......................................................................................................................125
9 Getting help............................................................................................................................................... 126
Recycling or End-of-Life service information..............................................................................................................126
Contacting Dell............................................................................................................................................................... 126
Accessing system information by using QRL..............................................................................................................126
Quick Resource Locator for Dell EMC PowerEdge R340 system...................................................................... 127
Receiving automated support with SupportAssist ....................................................................................................127
10 Documentation resources......................................................................................................................... 128
6Contents

About this document
This document provides an overview about the system, information about installing and replacing components, technical specications,
diagnostic tools, and guidelines to be followed while installing certain components.
1
About this document 7

Dell EMC PowerEdge R340 system overview
The Dell EMC PowerEdge R340 system is a 1U server that supports:
• One Intel Xeon Scalable processor
• Four DIMM slots
• Two AC power supply units
• Up to eight 2.5-inch or four 3.5-inch SAS, SATA drives
For more information about supported drives, see the Drive specications section.
NOTE: All instances of SAS, SATA drives, and SSDs are referred to as drives in this document, unless specied otherwise.
Topics:
• Front view of the system
• Rear view of the system
• Inside the system
• Locating the information tag of your system
• System Information label
Front view of the system
NOTE: The 8 x 2.5-inch conguration is shorter than the 4 x 3.5-inch conguration.
Figure 1. Front view of the 8 x 2.5-inch drive system
1Left control panel 2 Optical drive (optional)
3 Right control panel 4 Information tag
5 Drives (8)
2
8 Dell EMC PowerEdge R340 system overview

Figure 2. Front view of the 4 x 3.5-inch drive system
1 Left control panel 2 Optical drive (optional)
3 Right control panel 4 Information tag
5 Drives (4)
For more information about the ports, see the Technical Specications section.
Control panels
Left control panel
Figure 3. Left control panel view
1System health and system ID indicator
Dell EMC PowerEdge R340 system overview 9

Right control panel
Figure 4. Right control panel view
1 Power button 2 USB 2.0-compliant port
3 iDRAC direct Micro USB port
NOTE: For more information on the ports, see the Ports and connectors specications section.
Rear view of the system
Figure 5. Rear view of the system
1Serial port 2 NIC port (GB 1)
3 NIC port (GB 2) 4 Half-height PCIe expansion card slot
5 Full-height PCIe expansion card slot 6 Power supply unit 1
7 Power supply unit 2 8 System identication button
9 System status indicator cable port (CMA) 10 USB 3.0 port (2)
11 iDRAC9 dedicated network port 12 VGA port
NOTE: For more information about the ports and connectors, see the Ports and connectors specications section.
10 Dell EMC PowerEdge R340 system overview

Inside the system
Figure 6. Inside the system
1Intrusion switch 2 Optical drive
3 Power distribution board 4 PERC card
5 Expansion card riser 6 Heat sink
7 Memory module sockets 8 System board
9 Fan (4) 10 Drive backplane
Locating the information tag of your system
Your system is identied by a unique Express Service Code and Service Tag number. You can view the Express Service Code and Service
Tag by pulling out the information tag located on the front of the system. Alternatively, the information may be on the Mini Enterprise
Service Tag (MEST) label on the chassis, on the rear of the system. This information is used by Dell to route support calls to the
appropriate personnel.
Dell EMC PowerEdge R340 system overview 11

Figure 7. Locating Service Tag of your system
1 Information tag (front view) 2 Information tag (back view)
3 OpenManage Mobile (OMM) label 4 iDRAC MAC address and iDRAC secure password label
5 Service Tag, Express Service Code, QRL label
System Information label
PowerEdge R340 – System Information Label
Figure 8. Front and rear view conguration
12 Dell EMC PowerEdge R340 system overview

Figure 9. Jumper settings
Figure 10. Memory information
Dell EMC PowerEdge R340 system overview 13

Figure 11. System information
14 Dell EMC PowerEdge R340 system overview

Figure 12. Electrical overview
Dell EMC PowerEdge R340 system overview 15

Initial system setup and conguration
Setting up your system
Perform the following steps to set up your system:
1 Unpack the system.
2 Install the system into the rack. For more information about installing the system into the rack, see the Rail Installation Guide at
Dell.com/poweredgemanuals.
3 Connect the peripherals to the system.
4 Connect the system to its electrical outlet.
5 Power on the system by pressing the power button or by using iDRAC.
6 Power on the attached peripherals.
For more information about setting up your system, see the Getting Started Guide that shipped with your system.
iDRAC conguration
The Integrated Dell Remote Access Controller (iDRAC) is designed to make system administrators more productive and improve the overall
availability of Dell systems. iDRAC alerts administrators about system issues and enables them to perform remote system management.
This reduces the need for physical access to the system.
Options to set up iDRAC IP address
To enable communication between your system and iDRAC, you must rst congure the network settings based on your network
infrastructure.
NOTE: For static IP conguration, you must request for it at the time of purchase.
This option is set to DHCP by Default. You can set up the IP address by using one of the following interfaces:
Interfaces Document/Section
iDRAC Settings
utility
Dell Integrated Dell Remote Access Controller User's Guide at Dell.com/poweredgemanuals
Dell Deployment
Toolkit
Dell Deployment Toolkit User’s Guide at Dell.com/openmanagemanuals > OpenManage Deployment Toolkit
Dell Lifecycle
Controller
Dell Lifecycle Controller User’s Guide at Dell.com/poweredgemanuals
NOTE: To access iDRAC, ensure that you connect the ethernet cable to the iDRAC9 dedicated network port. You can also access
iDRAC through the shared LOM mode, if you have opted for a system that has the shared LOM mode enabled.
3
16 Initial system setup and conguration

Log in to iDRAC
You can log in to iDRAC as:
• iDRAC user
• Microsoft Active Directory user
• Lightweight Directory Access Protocol (LDAP) user
If you have opted for secure default access to iDRAC, you must use the iDRAC secure default password available on the system
Information tag. If you have not opted for secure default access to iDRAC, then use the default user name and password –root and
calvin. You can also log in by using your Single Sign-On or Smart Card.
NOTE: You must have the iDRAC credentials to log in to iDRAC.
NOTE: Ensure that you change the default user name and password after setting up the iDRAC IP address.
NOTE: The Intel Quick Assist Technology (QAT) on the Dell EMC PowerEdge R340 is supported with chipset integration and is
enabled through an optional license. The license les are enabled on the sleds through iDRAC.
For more information about drivers, documentation, and white papers on the Intel QAT, see https://01.org/intel-quickassist-technology.
For more information about logging in to the iDRAC and iDRAC licenses, see the latest Integrated Dell Remote Access Controller User's
Guide at Dell.com/poweredgemanuals.
You can also access iDRAC by using RACADM. For more information, see the RACADM Command Line Interface Reference Guide at
Dell.com/poweredgemanuals.
Options to install the operating system
If the system is shipped without an operating system, install a supported operating system by using one of the following resources:
Table 1. Resources to install the operating system
Resources Location
iDRAC Dell.com/idracmanuals
Lifecycle Controller Dell.com/idracmanuals > Lifecycle Controller
OpenManage Deployment Toolkit Dell.com/openmanagemanuals > OpenManage Deployment Toolkit
Dell certied VMware ESXi Dell.com/virtualizationsolutions
Installation and How-to videos for supported operating systems on
PowerEdge systems
Supported Operating Systems for Dell EMC PowerEdge systems
Methods to download rmware and drivers
You can download the rmware and drivers by using any of the following methods:
Initial system setup and conguration 17

Table 2. Firmware and drivers
Methods Location
From the Dell EMC support site Dell.com/support/home
Using Dell Remote Access Controller Lifecycle Controller (iDRAC
with LC)
Dell.com/idracmanuals
Using Dell Repository Manager (DRM) Dell.com/openmanagemanuals > Repository Manager
Using Dell OpenManage Essentials (OME) Dell.com/openmanagemanuals > OpenManage Essentials
Using Dell Server Update Utility (SUU) Dell.com/openmanagemanuals > Server Update Utility
Using Dell OpenManage Deployment Toolkit (DTK) Dell.com/openmanagemanuals > OpenManage Deployment Toolkit
Using iDRAC virtual media Dell.com/idracmanuals
Downloading drivers and rmware
Dell EMC recommends that you download and install the latest BIOS, drivers, and systems management rmware on your system.
Prerequisite
Ensure that you clear the web browser cache before downloading the drivers and rmware.
Steps
1 Go to Dell.com/support/home.
2 In the Drivers & Downloads section, type the Service Tag of your system in the Enter a Service Tag or product ID box, and then click
Submit.
NOTE: If you do not have the Service Tag, select Detect Product to allow the system to automatically detect the Service
Tag, or click View products, and navigate to your product.
3 Click Drivers & Downloads.
The drivers that are applicable to your system are displayed.
4 Download the drivers to a USB drive, CD, or DVD.
18 Initial system setup and conguration

Pre-operating system management applications
You can manage basic settings and features of a system without booting to the operating system by using the system rmware.
Topics:
• Options to manage the pre-operating system applications
• System Setup
• Dell Lifecycle Controller
• Boot Manager
• PXE boot
Options to manage the pre-operating system
applications
Your system has the following options to manage the pre-operating system applications:
• System Setup
• Dell Lifecycle Controller
• Boot Manager
• Preboot Execution Environment (PXE)
System Setup
By using the System Setup screen, you can congure the BIOS settings, iDRAC settings, and device settings of your system.
NOTE: Help text for the selected eld is displayed in the graphical browser by default. To view the help text in the text browser,
press F1.
You can access system setup by one of the following:
• Standard graphical browser—The browser is enabled by default.
• Text browser—The browser is enabled by using Console Redirection.
Viewing System Setup
To view the System Setup screen, perform the following steps:
1 Power on, or restart your system.
2 Press F2 immediately after you see the following message:
F2 = System Setup
NOTE: If your operating system begins to load before you press F2, wait for the system to nish booting, and then restart
your system and try again.
4
Pre-operating system management applications 19

System Setup details
The System Setup Main Menu screen details are explained as follows:
Option Description
System BIOS Enables you to congure BIOS settings.
iDRAC Settings Enables you to congure the iDRAC settings.
The iDRAC settings utility is an interface to set up and congure the iDRAC parameters by using UEFI (Unied
Extensible Firmware Interface). You can enable or disable various iDRAC parameters by using the iDRAC settings
utility. For more information about this utility, see Integrated Dell Remote Access Controller User’s Guide at
Dell.com/poweredgemanuals.
Device Settings Enables you to congure device settings.
System BIOS
You can use the System BIOS screen to edit specic functions such as boot order, system password, setup password, set the SATA mode,
and enable or disable USB ports.
Viewing System BIOS
To view the System BIOS screen, perform the following steps:
1 Power on, or restart your system.
2 Press F2 immediately after you see the following message:
F2 = System Setup
NOTE: If the operating system begins to load before you press F2, wait for the system to nish booting, and then restart
the system and try again.
3 On the System Setup Main Menu screen, click System BIOS.
System BIOS Settings details
The System BIOS Settings screen details are explained as follows:
Option Description
System Information Species information about the system such as the system model name, BIOS version, and Service Tag.
Memory Settings Species information and options related to the installed memory.
Processor Settings Species information and options related to the processor such as speed and cache size.
SATA Settings Species options to enable or disable the integrated SATA controller and ports.
Boot Settings Species options to specify the Boot mode (BIOS or UEFI). Enables you to modify UEFI and BIOS boot settings.
Network Settings Species options to manage the UEFI network settings and boot protocols.
20 Pre-operating system management applications