Dell Precision Compact User manual

Precision Compact
Accessories Installation Guide
Regulatory Model: D16U
Regulatory Type: D16U001
March 2022
Rev. A00

Notes, cautions, and warnings
NOTE: A NOTE indicates important information that helps you make better use of your product.
CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid
the problem.
WARNING: A WARNING indicates a potential for property damage, personal injury, or death.
© 2022 Dell Inc. or its subsidiaries. All rights reserved. Dell Technologies, Dell, and other trademarks are trademarks of Dell Inc. or its
subsidiaries. Other trademarks may be trademarks of their respective owners.

Chapter 1: Before you begin ......................................................................................................... 4
Chapter 2: Precision Compact Wall Mount ................................................................................... 5
Chapter 3: Precision Compact Desk Mount ..................................................................................11
Chapter 4: Precision Compact All-in-One Stand - CFS22............................................................. 17
Chapter 5: Getting help...............................................................................................................24
Contacting Dell...................................................................................................................................................................24
Contents
Contents 3

Before you begin
Steps
1. Save and close all open files and exit all open applications.
2. Shut down your system: Click Start > Power > Shut down.
NOTE: If you are using a Linux operating system, see the documentation of your operating system for shut-down
instructions.
3. Disconnect your system and all attached devices from their electrical outlets.
4. Disconnect all attached network devices and peripherals, such as keyboard, mouse, and monitor from your system.
CAUTION: To disconnect a network cable, first unplug the cable from your system and then unplug the cable
from the network device.
5. If the system unit or the adapter is being installed on the monitor:
a. Disconnect the power and all the display cables from the monitor.
b. Remove the stand from the monitor and place the monitor on a clean and soft surface.
1
4 Before you begin

Precision Compact Wall Mount
Steps
1. Follow the instructions in Before working inside your computer.
2. Place the VESA mount on the wall.
3. Install the four self-tapping screws (M4x13) to secure the VESA mount to the wall.
4. Install the two screws (M3x6) to secure the AC adapter sleeve to the VESA mount.
2
Precision Compact Wall Mount 5

5. Install the four step screws (M4x4) on the chassis.
6Precision Compact Wall Mount

6. Align the step screw (M4x4) with the notches on the wall mount and mount the computer on the wall mount.
Precision Compact Wall Mount 7

7. Place the AC adapter on the AC adapter sleeve.
8Precision Compact Wall Mount

8. Wrap the sleeve around the AC adapter and insert the retaining tabs into the holes on the AC adapter sleeve at an
appropriate level.
Precision Compact Wall Mount 9

10 Precision Compact Wall Mount

Precision Compact Desk Mount
Steps
1. Follow the instructions in Before working inside your computer.
2. Place the VESA mount under the desk.
3. Install the four self-tapping screws (M4x13) to secure the VESA mount under the desk.
4. Install the four step screws (M4x4) on the chassis.
3
Precision Compact Desk Mount 11

5. Align the step screws (M4x4) with the notches on the desk mount and mount the computer on the desk mount.
12 Precision Compact Desk Mount

6. Install the two screws (M3x6) to secure the AC adapter sleeve under the desk.
Precision Compact Desk Mount 13

7. Place the AC adapter on the AC adapter sleeve.
14 Precision Compact Desk Mount

8. Wrap the sleeve around the AC adapter and insert the retaining tabs into the holes on the AC adapter sleeve at an
appropriate level.
Precision Compact Desk Mount 15

16 Precision Compact Desk Mount

Precision Compact All-in-One Stand - CFS22
About this task
Steps
1. Install the two screws (M3x6) to secure the AC adapter sleeve (upsell) to the all-in-one stand.
NOTE: The AC adapter sleeve is an optional component that needs to be purchased separately.
2. Install the four step (M4x4) screws on the chassis.
4
Precision Compact All-in-One Stand - CFS22 17

3. Align the step screws (M4x4) with the notches on the all-in-one stand and mount the computer on the all-in-one stand.
18 Precision Compact All-in-One Stand - CFS22

4. Align the tabs on the cable cover with the slots on the computer and slide the cable cover to lock it in place.
Precision Compact All-in-One Stand - CFS22 19

5. Place the AC adapter on the AC adapter sleeve .
20 Precision Compact All-in-One Stand - CFS22