Dell Ultra Violet Touch Mouse User manual

Dell™ Ultra Violet Touch Mouse
(online user’s manual)

Features: Dell™ Ultra Violet Touch Mouse
• Dell™ Ultra Violet Touch Mouse Front View
• Dell™ Ultra Violet Touch Mouse Rear View
Dell™ Ultra Violet Touch Mouse Front View
No. Description
1 Left Mouse Click
2 Touch Scroll
3 Right Mouse Click
4
Battery Indicator
-Amber (blinks): Low Battery
-Amber (solid): Battery Charging
-White (solid): Charging Complete

Dell™ Ultra Violet Touch Mouse Rear View
No. Description
1 USB port cover
2 Optical Sensor
3
Power Button and Indicator
- White (solid): Power on
- Blue (blinks): In Pairing mode

Setup: Dell™ Ultra Violet Touch Mouse
• Charging Dell™ Ultra Violet Touch Mouse
• Installing Dell™ WM713 Wireless Touch Mouse Software
• Pairing Dell™ Ultra Violet Touch Mouse
• Configuring Dell™ Ultra Violet Touch Mouse Settings
Charging Dell™ Ultra Violet Touch Mouse
Before using this touch mouse for the first time, you need to charge using the USB cable.
Normal charge is approximately 4 hours.
1. Open the USB port cover.
2. Connect one end of the USB cable to the mini USB port of the mouse.
3. Connect the other end of the USB cable to the notebook or computer.
The Amber LED lights up while the battery is charging.
The White LED lights up when the battery is fully charged. Once the USB cable
is unplugged, the White LED is turned off.

Installing Dell™ WM713 Wireless Touch Mouse
Software
To customize the touch mouse settings, you need to install the Wireless Touch Mouse
software into your notebook or computer.
1. Insert the supplied software CD into your CD-ROM drive. The software installation
file should load automatically.
If it does not, click Start > Run, enter the path of your CD-ROM drive (D: for
example) and browse for the setup.exe file. Double-click the file to load the
installation file.
2. Click Next to continue.
3. Specify the location to install the software and click Next.

4. Click Install to begin installation.
5. The software installation may take a while to complete.

6. Click Finish to complete the installation.
7. Click Yes to reboot your computer system.

Pairing Dell™ Ultra Violet Touch Mouse
The touch mouse needs to be paired and connected to your notebook or computer before it
can be used.
1. Click Start > Dell WM713 Wireless Touch Mouse to launch the software.
<Windows 7>
<Windows 8>

2. Click General Settings.
3. Press and hold the Power button for three seconds.
The Blue LED (on the Power button) blinks, indicating the touch mouse is in
pairing mode.

4. Click Bluetooth Pairing.
The detected devices appear on the screen.
5. Click Dell Bluetooth Mouse and click Next to continue.