Dell WM126 User manual

Dell WM126
Wireless Mouse
User’s Guide

Copyright © 2015 Dell Inc. All rights reserved. This product is protected by U.S. and international
copyright and intellectual property laws.
Dell™ and the Dell logo are trademarks of Dell Inc. in the United States and/or other jurisdictions.
All other marks and names mentioned herein may be trademarks of their respective companies.
2015 – 11 Rev. A00
Notes, Cautions, and Warnings
NOTE: A NOTE indicates important information that helps you make
better use of your Dell Wireless mouse.
CAUTION: A CAUTION indicates potential damage to hardware or loss
of data if instructions are not followed.
WARNING: A WARNING indicates a potential for property damage,
personal injury, or death.

│3
Contents
What’s in the box ................................4
Features ........................................5
Top View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Bottom View . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Setting up your wireless mouse ...................7
Dell Universal Receiver feature for Windows .....10
Dell Universal Receiver Control Panel . . . . . . . . . . . 10
Installing Dell Universal Receiver Control Panel . . . . . 10
Using Dell Universal Receiver Control Panel. . . . . . . . 10
Troubleshooting ............................... 11
Specifications ..................................15
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Electrical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Physical Characteristics . . . . . . . . . . . . . . . . . . . . 15
Environmental. . . . . . . . . . . . . . . . . . . . . . . . . . 15
2.4 GHz wireless. . . . . . . . . . . . . . . . . . . . . . . . . 15
Statutory information...........................16
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Limited Warranty and Return Policies . . . . . . . . . . . . . . . . . 16
For U.S. customers: . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
For European, Middle Eastern and African customers: . . . . . . . 16
For non-U.S. customers: . . . . . . . . . . . . . . . . . . . . . . . . . 16

4 │What’s in the box
What’s in the box
AA
Dell Wireless Mouse
WM126
1
3
4
2
1 wireless mouse 2 USB receiver
3 manuals 4 AA-type battery

Features │5
Features
Top View
1
2
3
4
1 left button 2 battery status light
3 scroll / middle button 4 right button
NOTE: When the mouse is powered on, the battery status light will be
flashing amber 10 times if the battery power is low.

6 │Features
Bottom View
ON OFF
1
2
1 power button 2 optical sensor

Setting up your wireless mouse │7
Setting up your wireless mouse
1. Remove the mouse cover.
A A
2. Install the AA battery into the battery compartment.
A A
AA

8 │Setting up your wireless mouse
3. Remove the USB receiver.
A A
4. Replace the mouse cover.
A A
5. Insert the USB receiver into the USB port on your computer.

Setting up your wireless mouse │9
6. Turn on your mouse.
A A
ON OFF
NOTE: Make sure the distance between your computer and mouse is
within 10 meters.

10 │Dell Universal Receiver feature for Windows
Dell Universal Receiver feature for
Windows
Dell Universal Receiver
The Dell Universal Receiver allows up to six Dell Universal compatible
wireless devices to be added to the receiver.
Dell Universal Receiver Control Panel
You can add Dell Universal compatible wireless devices to the receiver using
Dell Universal Receiver Control Panel.
Installing Dell Universal Receiver Control Panel
To install Dell Universal Control Panel:
1. Turn on the computer.
2. Open the web browser and navigate to www.dell.com/support.
3. Type in the Search bar “dell universal receiver”. Then click Search.
4. Download and install the Dell Universal Receiver software in your
system.
Using Dell Universal Receiver Control Panel
The receiver and mouse shipped with your system are paired at the factory.
Use the Dell Universal Receiver Control Panel to view the connection status
of your wireless mouse or pair the mouse with another receiver.
Follow the instructions on the screen to add a device or to remove pairing.