Dell PowerEdge R900 User manual

Rack Installation Guide Information Update
This document updates information included in your system Rack
Installation Guide.
Installing the Cable Tray and Cable Management Arm
Figure 1 updates Figure 1-8 in the Rack Installation Guide. Your system’s
cable tray connects to the system back panel as shown in Figure 1.
Figure 1. Installing the Cable-Management Arm
1 cable tray 2 mounting tabs (2)
back of system
back of rack
1
2
October 2007

Securing Cables to the Cable-Management Arm
When routing cables through the cable-management arm, be sure and use
the separate Velcro strap provided in the rack kit to tightly secure the cable
bundle to the cable basket elbow on the CMA. See Figure 2.
Figure 2. Routing Cables on the Cable-Management Arm
1 cable management arm (CMA) 2 CMA Velcro strap
2
1

____________________
Information in this document is subject to change without notice.
© 2007 Dell Inc. All rights reserved. Printed in the U.S.A.
Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly
forbidden.
Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Inc.
Other trademarks and trade names may be used in this document to refer to either the entities claiming
the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and
trade names other than its own.