Delta Children SIMMONS KIDS By The Bed Deluxe Bassinet User manual

BY THE BED DELUXE
BASSINET
ASSEMBLY INSTRUCTIONS
Styles and colors may vary
25501
INSTRUCTION MANUAL
WARNING:
Adult assembly required because of
small parts. Keep assembly parts
out
of reach of children under 3 years.
CHOKING HAZARD
Customer Experience Center
phone: [phone]
email: [email protected] DCP-IM-04012020-F8
IMPORTANT: Read all instructions before assembly and use of the product.
Keep the instructions for future reference.
www.DeltaChildren.com

Consumer Information
WARNING
• To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their backs to sleep, unless otherwise advised
by your physician.
• Always attach all provided fasteners tightly according to the instructions. Check frequently. Do not use if there are any loose or
missing parts or signs of damage. Do not substitute parts. Contact the manufacturer for replacement parts.
•Always pull out legs to full extension when in use.
• Use bassinet with only one child at a time.
• Strings can cause strangulation! DO NOT place items with a string around a child’s neck, such as hood strings or pacifier cords.
DO NOT suspend strings over a product or attach strings to toys.
• Toys are not to be “mouthed” by the baby and should be positioned clearly out of reach of the baby’s face and mouth.
• Do not place medication, small toys, small items, cords, straps or similar items that could become wound around the child’s neck in
or near this product and do not place product near a window, patio door, heater, or power outlet.
• If a sheet is used with the pad use only the one provided by Delta Children or one specifically the dimension of the bassinet mattress.
• Always check that the bassinet is securely locked on the base/stand by pulling upwards on the bassinet bed.
SUFFOCATION HAZARD
Infants have suffocated:
• In gaps between an extra padding, a mattress (too small or too thick) and
product sides.
• On soft bedding.
• NEVER add a pillow, comforter or another mattress for padding.
• Use only the pad provided by the manufacturer that is no thicker than 25 mm (1 In)
and is of such a size that, when pushed against any side of the product, it does not
leave a gap of more than 25 mm (1 in) between the mattress and sides.
FALL HAZARD: For use from birth to 5 months or until your baby begins to push up on their hands and knees,
whichever comes first.
WARNING: Do not use this bassinet if you cannot exactly follow the accompanying instructions. Failure to follow these
warnings and instructions could result in serious injury or death.
• Remove any tools or excess parts including plastic packaging from bassinet vicinity after assembly.
•Always make sure both sides of the bassinet are adjusted at the same height position making the bassinet equally leveled.
• Do not use the body of the bassinet without its frame.
• Read all instructions before assembling unit.
KEEP INSTRUCTIONS FOR FUTURE USE.
DO NOT USE THIS UNIT IF THE INSTRUCTIONS CANNOT BE STRICTLY FOLLOWED.
• Before each usage or assembly, inspect unit for damaged hardware, loose joints, missing parts or sharp edges. NEVER use this
product if there are any loose or missing fasteners, loose joints, broken parts, or torn mesh/fabric. Check before assembly and
periodically during use. Contact Simmons Customer Service Department at 646-435-8726 for
replacement parts, repair or instructions.

Before returning this product to the store!
Let’s see if we can assist you!
• Not sure how to assemble our product?
Visit our site for easy to follow instructions along with some Tricks and Tips assembly
videos https://www.deltachildren.com/pages/instructions
• If you are missing a piece or have a damaged part
Please contact our Consumer Experience Center for assistance at 646-435-8726 or email
[email protected]. To better assist you please have your Style# or Model# and
Lot# available. This can be found on a white rectangular sticker on your product, on the
registration card, and on the product’s box.
• In the event we do not have a replacement part available
You may need to return your product to the retailer for an exchange or refund.
• Warranty
In order to protect your investment, don’t forget to register your product.
You may also wish to consider purchasing our extended warranty.
Visit https://www.deltachildren.com/pages/extended-warranty for more details.
• Please note:
“All Final”, “As Is” or Third Party/Liquidator sales are not covered under our Limited
Manufacturer Warranty.

4
Customer Service Tel. [phone] www.DeltaChildren.com
This Delta product is warranted to be free from defects for a period of 90 days from the date of purchase
under normal use. If a product is defective during this period, we will at our option repair or replace the
defective part or product. This limited warranty extends only to the original retail purchaser and is valid only
when supplied with proof of purchase, or if received as a gift, when the registration is on file with Delta.
This limited warranty does not cover the following:
• Products purchased as floor models or samples.
• Items purchased on an “as-is” basis, as a second hand product, or as a resale product.
• Items purchased at a Final sale, a “Going out of Business” sale, or a Liquidation sale. This limited warranty
gives you specific legal rights and you may also have other rights which vary from state to state.
This limited warranty gives you specific legal rights and you may also have other rights which vary from
state to state.
TO REGISTER YOUR PRODUCT for important safety alerts and updates to your product please visit www.
deltachildren.com
TO REPORT A PROBLEM, please log on to www.deltachildren.com and click the Consumer Care Tab, or
contact us by phone at [phone]
Date of Purchase: _____________ (you should also keep your receipt)
EXTENDED WARRANTY
DON’T MISS YOUR CHANCE TO BE COVERED FOR ALL OF LIFE’S MISHAPS!
With Delta’s Extended Warranty, you’re covered for mechanical failure from normal use or if
your item stops working due to normal wear and tear, plus all those unexpected surprises.
2 YEARS OF PROTECTION
For Additional Information:
Simply visit our Website, register your product, and add the Extended Warranty
https://www.deltachildren.com/pages/product-registration
Extended Warranty only available in the following States: Arkansas, Colorado, Delaware, District of Columbia, Georgia, Idaho,
Illinois, Indiana, Iowa, Kansas, Kentucky, Louisiana, Maryland, Michigan, Mississippi, Missouri, Nebraska, Nevada, New Hampshire,
New York, North Carolina, North Dakota, Pennsylvania, Rhode Island, South Dakota, Tennessee, Utah, West Virginia
LIMITED MANUFACTURER WARRANTY

5
Customer Service Tel. [phone] www.DeltaChildren.com
Right Side Frame
Stand with Wheel
Left Side Frame
Stand with Wheel
Bassinet Fabric
Bottom Cross Support Bar
Top Support Tube
Parts
Mattress Support Pad
Sheet
FRONT
BACK
Hex Wrench
M6 Hex Screw (X4)
Nut & Bolt
*Screws are actual size to scale
Hardware

6
Customer Service Tel. [phone] www.DeltaChildren.com
Fig. 1
Fig. 1A
Fig. 1C
Fig. 1B
• Insert support bar to the left side frame stand (Fig.1). Secure with the
two screws (Fig. 1A). Use the wrench to tighten screws in clockwise
direction (Fig. 1B). Repeat for the right side frame stand. Make sure
frame is in a fully locked position (Fig. 1C) pull outward on left and
right side frames.
Bassinet Frame Assembly
Assembly
1
Secure side frame
stand and support
tube with screw
Tighten screws with
wrench clockwise
Bassinet frame
Fully locked position
Insert support bar into
side frame stand
Left Side
Frame Stand Right Side Frame Stand
Bottom Cross
Support Bar
Leg Extension
2
• Fully extend both sides of the bassinet legs by pressing the button
located on top of the bassinet legs and pull outward to fully
extended position (Fig. 2)
Fig. 2
2
1
1 2

7
Customer Service Tel. [phone] www.DeltaChildren.com
BACK
FRONT
left pocket
right pocket
Fig. 3A
Fig. 3C
Place the back bassinet fabric
to the back top support tube
Insert both sides of the top support
tube into the bassinet frame
STEP 1: Align top back support tube to the side frames.
Insert both sides of the top support tube into the bassinet
frame (Fig. 3A). Secure by inserting bolt through holes and
screwing nut clockwise (Fig. 3B).
STEP 2: Place the back bassinet fabric over the back rail tube.
Align and fasten zipper to top rail (Fig. 3C).
NOTE: Zipper pull tab slider located on left side.
Side Buttons
Fabric Assembly
Support Tube
Front Zipper
Back Zipper
Start BACK zipper
pull tap is located
on left side
Start FRONT zipper
pull tap is located
on right side
Fully Locked Position
Fig. 3B
STEP 2
STEP 1
END
TOP SUPPORT
TUBE
zipper pull
tap slider
START
3
BACK
FRONT
BACK
Nut
Bolt

8
Customer Service Tel. [phone] www.DeltaChildren.com
Fabric Assembly
3
STEP 3: Place the front bassinet fabric over the front rail tube.
Align and fasten zipper to top rail (Fig. 3D) until fully
zipped (Fig. 3E)
STEP 4: Place sheet over mattress support pad.
Insert mattress support pad to sleeper.
NOTE: The mattress support pad should fully cover the bassinet bottom.
No excess fabric should show on the edges.
STEP 4
STEP 3
Fig. 3E
Fabric Bassinet Fully Zipped
Mattress Pad With Sheet
TOP SUPPORT
TUBE
zipper pull
tap slider
Fig. 3D
Place the front bassinet fabric
to the front top support tube
END
START
FRONT

9
Customer Service Tel. [phone] www.DeltaChildren.com
Height Adjustment
4
NOTE: To adjust up or down you must unlock
EACH SIDE separately.
WARNING: NEVER adjust height
with baby inside.
STEP 4
STEP 1
STEP 2 & 3
Mattress Pad With Sheet
Mattress Pad With Sheet
1 2 3 Lever
Locking Housing
4
ABC
D
Support Bar
1
2
3
4
5
BACK
FRONT
5 POSITIONS
STEP 1: Remove mattress support pad
STEP 2: Locate left side locking housing (A), push and hold up from
underneath locking housing (B). Then press the lever inward
(C) and move top rail up or down into desired position.
There are 5 positions total (D).
STEP 3: Repeat STEP 2 on the right side.
NOTE: Make sure the bassinet is equally level.
STEP 4: Insert mattress pad
NOTE: The mattress support pad should fully cover the bassinet bottom.
No excess fabric should show on the edges.

10
Customer Service Tel. [phone] www.DeltaChildren.com
Bassinet Frame DisassemblyRemoving Fabric
Fig. 1A
Unzip both sides of the
bassinet fabric
from the top support tube
Fig. 2A
Undo nut and bolt, then press front and back side buttons on the
support tube and lift upward to remove.Repeat on opposite side.
Front and Back
Side Buttons
Fig. 1B
Bassinet Fabric
Fully Removed
Disassembly
Left Side
Frame Stand Right Side Frame Stand
Bottom Cross
Support Bar
Fig. 1
BACK
FRONT
Fig. 2B
Front and Back
Side Buttons
Mattress Pad With Sheet
1
• Remove mattress support pad (Fig. 1)
• Unzip both sides of the bassinet fabric from the top rail
(Fig. 1A and Fig. 1B).
• Undo nut & bolt by unscrewing counter-clockwise, then press front and
back side buttons together and pull upward on tube to remove (Fig.2A).
• Press both side buttons on the support tube and lift upward to remove.
Repeat on opposite side (Fig.2B). Repeat on the other side.
• Unscrew screws left and right side frame (Fig. 2C).
2
Fig. 2C
Nut
Bolt