Denon AVR-X500 User manual

AVR-X500
AV SURROUND RECEIVER
Getting Started
Erste Schritte/ Mise en route/ Guida introduttiva/ Antes de empezar/ Aan de slag/ Att komma igång/ Начало работы/ Skrócona instrukcja obsługi/ Başlarken
English
DEutsch
Français
italiano
EsPaÑol
nEDErlanDs
sVEnsKa
РУССКИЙ
PolsKi
tÜrKçE

1
Thank you for choosing a Denon AV receiver.
This guide explains all the steps necessary for installing this
unit and playing back a Blu-ray Disc.
If you have setup problems:
If you need additional help in solving problems, contact
Denon customer service in your area.
Welcome

2
What’s In the Box
Getting Started Owner’s
Manual
Safety Instructions
Receiver Power cord FM indoor
antenna
AM loop
antenna
Remote
control unit
R03/AAA
batteries
Cable label
Required for setup
TV HDMI cable
Speaker systems
Speaker cable Subwoofer cable
Blu-ray Disc player
%
•These drawings are for illustrative purposes only and may
not represent the actual product(s).
Before You Begin

3
There are seven steps to the setup process.
1Connecting the speakers
2Connecting this unit to the TV
3Connecting a Blu-ray Disc player
4Turn the Blu-ray Disc player and subwoofer power on
5Connect the power
6Installing batteries in the remote control unit
7Turn on power to the unit
Setup

4
nStandard speaker installation.
Surround speaker
60 – 90 cm
GViewed from the sideH
Front speaker
%
•Use the illustration as a guide for how high each speaker
should be installed. The height does not need to be exactly the
same.
FL FR
SW
C
SL
SR
z1
z2
z1 22˚ – 30˚
z2 120˚
GSpeaker abbreviationsH
FL Front speaker (L) SW Subwoofer
FR Front speaker (R) SL Surround speaker (L)
CCenter speaker SR Surround speaker (R)
1
Connecting the speakers

5
nAbout the speaker cable label
(supplied) for channel identification.
The channel display section for speaker terminals on
the rear panel is color-coded for each channel to be
identifiable.
Attach the speaker cable label for each channel to its
speaker cable as shown in the diagram.
Then, make connection so that the color of the speaker
terminal matches that of the speaker cable label.
Speaker This unit
nConnecting the speaker cables.
Approx. 10 mm

6
nStandard speaker connection.
FLFR C SR SL
SW
nSet up speakers.
When using 5.1-channel surround playback, you can
use this unit with the default settings. However, to
obtain the optimum surround playback, we recommend
adjusting the installation distance and volume etc., of
each speaker.
For details, see the included Owner’s Manual.

7
nConnect the receiver to your TV with
an HDMI cable.
HDMI IN
HDMI OUT
MONITOR
HDMI cable
Receiver (Rear panel)
2
Connecting this unit to the TV
nPlace the receiver near your TV.
TV
Receiver

8
nTurn on the TV.
TV remote control unit
nSelect the appropriate HDMI input
on your TV.
HDMI
INPUT
TV remote control unit

9
4Turn the Blu-ray Disc
player and subwoofer
power on
Blu-ray Disc player
Subwoofer
HDMI IN
Blu-ray
HDMI OUT
Blu-ray Disc player
3Connecting a Blu-ray
Disc player
HDMI cable