Denon DP-200USB User manual

FULLY AUTOMATIC TURNTABLE SYSTEM
DP-200USB
Owner’s Manual
Bedienungsanleitung
Manuel de l’Utilisateur
Manuale delle istruzioni
Manual del usuario
Gebruiksaanwijzing
Bruksanvisning

ITALIANO ESPAÑOL NEDERLANDS SVENSKADEUTSCH FRANCAISENGLISH
I
• Location of Caution Labels: Bottom
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISQUE DE CHOC ELECTRIQUE NE PAS
OUVRIR.
CAUTION:TO REDUCE THE RISK OF ELECTRIC
SHOCK. DO NOT REMOVE COVER (ORBACK).
NO USER-SERVICEABLE PARTS INSIDE REFER
SERVICING TO QUALIFIED SERVICE PRESONNEL
WARNING : TO PREVENT FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.
DISCONNECT THE MAINS PLUG FROM THE
SUPPLY SOCKET WHEN NOT IN USE.
AVIS :
CAUTION:
To completely disconnect this product from the mains, disconnect
the plug from the wall socket outlet.
The mains plug is used to completely interrupt the power supply to
the unit and must be within easy access by the user.
VORSICHT:
Um dieses Gerät vollständig von der Stromversorgung abzutrennen,
ziehen Sie bitte den Stecker aus der Wandsteckdose.
Der Netzstecker wird verwendet, um die Stromversorgung zum
Gerät völlig zu unterbrechen; er muss für den Benutzer gut und
einfach zu erreichen sein.
PRECAUTION:
Pour déconnecter complètement ce produit du courant secteur,
débranchez la prise de la prise murale.
La prise secteur est utilisée pour couper complètement
l’alimentation de l’appareil et l’utilisateur doit pouvoir y accéder
facilement.
ATTENZIONE:
Per scollegare completamente questo prodotto dalla rete di
alimentazione elettrica, scollegare la spina dalla relativa presa a muro.
La spina di rete viene utilizzata per interrompere completamente
l’alimentazione all’unità e deve essere facilmente accessibile
all’utente.
WAARSCHUWING:
Om de voeding van dit product volledig te onderbreken moet de
stekker uit het stopcontact worden getrokken.
De netstekker wordt gebruikt om de stroomtoevoer naar het toestel
volledig te onderbreken en moet voor de gebruiker gemakkelijk
bereikbaar zijn.
FÖRSIKTIHETSMÅTT:
Koppla loss stickproppen från eluttaget för att helt skilja produkten
från nätet.
Stickproppen används för att helt bryta strömförsörjningen till
apparaten, och den måste vara lättillgänglig för användaren.
PRECAUCIÓN:
Para desconectar completamente este producto de la alimentación
eléctrica, desconecte el enchufe del enchufe de la pared.
El enchufe de la alimentación eléctrica se utiliza para interrumpir por
completo el suministro de alimentación eléctrica a la unidad y debe
de encontrarse en un lugar al que el usuario tenga fácil acceso.
• DECLARATION OF CONFORMITY
We declare under our sole responsibility that this product, to which this
declaration relates, is in conformity with the following standards:
EN60065, EN55013, EN55020, EN61000-3-2 and EN61000-3-3.
Following the provisions of 2006/95/EC and 2004/108/EC Directive.
• ÜBEREINSTIMMUNGSERKLÄRUNG
Wir erklären unter unserer Verantwortung, daß dieses Produkt, auf das
sich diese Erklärung bezieht, den folgenden Standards entspricht:
EN60065, EN55013, EN55020, EN61000-3-2 und EN61000-3-3.
Entspricht den Verordnungen der Direktive 2006/95/EC und 2004/108/EC.
• DECLARATION DE CONFORMITE
Nous déclarons sous notre seule responsabilité que l’appareil, auquel se
réfère cette déclaration, est conforme aux standards suivants:
EN60065, EN55013, EN55020, EN61000-3-2 et EN61000-3-3.
D’après les dispositions de la Directive 2006/95/EC et 2004/108/EC.
• DICHIARAZIONE DI CONFORMITÀ
Dichiariamo con piena responsabilità che questo prodotto, al quale la
nostra dichiarazione si riferisce, è conforme alle seguenti normative:
EN60065, EN55013, EN55020, EN61000-3-2 e EN61000-3-3.
In conformità con le condizioni delle direttive 2006/95/EC e 2004/108/EC.
QUESTO PRODOTTO E’ CONFORME
AL D.M. 28/08/95 N. 548
• DECLARACIÓN DE CONFORMIDAD
Declaramos bajo nuestra exclusiva responsabilidad que este producto al
que hace referencia esta declaración, está conforme con los siguientes
estándares:
EN60065, EN55013, EN55020, EN61000-3-2 y EN61000-3-3.
Siguiendo las provisiones de las Directivas 2006/95/EC y 2004/108/EC.
• EENVORMIGHEIDSVERKLARING
Wij verklaren uitsluitend op onze verantwoordelijkheid dat dit produkt,
waarop deze verklaring betrekking heeft, in overeenstemming is met de
volgende normen:
EN60065, EN55013, EN55020, EN61000-3-2 en EN61000-3-3.
Volgens de bepalingen van de Richtlijnen 2006/95/EC en 2004/108/EC.
• ÖVERENSSTÄMMELSESINTYG
Härmed intygas helt på eget ansvar att denna produkt, vilken detta intyg
avser, uppfyller följande standarder:
EN60065, EN55013, EN55020, EN61000-3-2 och EN61000-3-3.
Enligt stadgarna i direktiv 2006/95/EC och 2004/108/EC.
nSAFETY PRECAUTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCETHE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICINGTO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of
uninsulated “dangerous voltage” within the product’s enclosure
that may be of sufficient magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating
and maintenance (servicing) instructions in the literature
accompanying the appliance.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSETHIS APPLIANCETO RAIN OR MOISTURE.
DENON EUROPE
Division of D&M Germany GmbH
An der Landwehr 19, Nettetal,
D-41334 Germany

DEUTSCHFRANCAISITALIANOESPAÑOLNEDERLANDSSVENSKA ENGLISH
II
CAUTION:
• The ventilation should not be impeded by covering the ventilation openings with items,
such as newspapers, tablecloths, curtains, etc.
• No naked flame sources, such as lighted candles, should be placed on the unit.
• Do not expose the unit to dripping or splashing fluids.
• Do not place objects filled with liquids, such as vases, on the unit.
ACHTUNG:
• Die Belüftung sollte auf keinen Fall durch das Abdecken der Belüftungsöffnungen durch
Gegenstände wie beispielsweise Zeitungen, Tischtücher, Vorhänge o. Ä. behindert
werden.
• Auf dem Gerät sollten keinerlei direkte Feuerquellen wie beispielsweise angezündete
Kerzen aufgestellt werden.
• Das Gerät sollte keiner tropfenden oder spritzenden Flüssigkeit ausgesetzt werden.
• Auf dem Gerät sollten keine mit Flüssigkeit gefüllten Behälter wie beispielsweise Vasen
aufgestellt werden.
ATTENTION:
• La ventilation ne doit pas être gênée en recouvrant les ouvertures de la ventilation avec des
objets tels que journaux, rideaux, tissus, etc.
• Aucune flamme nue, par exemple une bougie, ne doit être placée sur l’appareil.
• L’appareil ne doit pas être exposé à l’eau ou à l’humidité.
• Ne pas poser d’objet contenant du liquide, par exemple un vase, sur l’appareil.
ATTENZIONE:
• Le aperture di ventilazione non devono essere ostruite coprendole con oggetti, quali
giornali, tovaglie, tende e così via.
• Non posizionate sull’unità fiamme libere, come ad esempio candele accese.
• L’apparecchiatura non deve essere esposta a gocciolii o spruzzi.
• Non posizionate sull’unità alcun oggetto contenente liquidi, come ad esempio i vasi.
PRECAUCIÓN:
• La ventilación no debe quedar obstruida por haberse cubierto las aperturas con objetos
como periódicos, manteles, cortinas, etc.
• No debe colocarse sobre el aparato ninguna fuente inflamable sin protección, como velas
encendidas.
• No exponer el aparato al goteo o salpicaduras cuando se utilice.
• No colocar sobre el aparato objetos llenos de líquido, como jarros.
WAARSCHUWING:
• De ventilatie mag niet worden belemmerd door de ventilatieopeningen af te dekken met
bijvoorbeeld kranten, een tafelkleed, gordijnen, enz.
• Plaats geen open vlammen, bijvoorbeeld een brandende kaars, op het apparaat.
• Stel het apparaat niet bloot aan druppels of spatten.
• Plaats geen voorwerpen gevuld met water, bijvoorbeeld een vaas, op het apparaat.
OBSERVERA:
• Ventilationen bör inte förhindras genom att täcka för ventilationsöppningarna med föremål
såsom tidningar, bordsdukar, gardiner osv.
• Inga blottade brandkällor, såsom tända ljus, får placeras på apparaten.
• Apparaten får inte utsättas för vätska.
• Placera inte föremål fyllda med vätska, t.ex. vaser, på apparaten.
• Avoid high temperatures.
Allow for sufficient heat dispersion when installed in a rack.
• Vermeiden Sie hohe Temperaturen.
Beachten Sie, dass eine ausreichende Belüftung gewährleistet
wird, wenn das Gerät auf ein Regal gestellt wird.
• Eviter des températures élevées.
Tenir compte d’une dispersion de chaleur suffisante lors de
l’installation sur une étagère.
• Evitate di esporre l’unità a temperature elevate.
Assicuratevi che vi sia un’adeguata dispersione del calore
quando installate l’unità in un mobile per componenti audio.
• Evite altas temperaturas.
Permite la suficiente dispersión del calor cuando está
instalado en la consola.
• Vermijd hoge temperaturen.
Zorg er bij installatie in een audiorack voor, dat de door
het toestel geproduceerde warmte goed kan worden
afgevoerd.
• Undvik höga temperaturer.
Se till att det finns möjlighet till god värmeavledning vid
montering i ett rack.
• Handle the power cord carefully.
Hold the plug when unplugging the cord.
• Gehen Sie vorsichtig mit dem Netzkabel um.
Halten Sie das Kabel am Stecker, wenn Sie den Stecker
herausziehen.
• Manipuler le cordon d’alimentation avec précaution.
Tenir la prise lors du débranchement du cordon.
• Manneggiate il cavo di alimentazione con attenzione.
Tenete ferma la spina quando scollegate il cavo dalla presa.
• Maneje el cordón de energía con cuidado.
Sostenga el enchufe cuando desconecte el cordón de
energía.
• Hanteer het netsnoer voorzichtig.
Houd het snoer bij de stekker vast wanneer deze moet
worden aan- of losgekoppeld.
• Hantera nätkabeln varsamt.
Håll i kabeln när den kopplas från el-uttaget.
• Keep the unit free from moisture, water, and dust.
• Halten Sie das Gerät von Feuchtigkeit, Wasser und Staub
fern.
• Protéger l’appareil contre l’humidité, l’eau et la poussière.
• Tenete l’unità lontana dall’umidità, dall’acqua e dalla
polvere.
• Mantenga el equipo libre de humedad, agua y polvo.
• Laat geen vochtigheid, water of stof in het apparaat
binnendringen.
• Utsätt inte apparaten för fukt, vatten och damm.
• Unplug the power cord when not using the unit for long
periods of time.
• Wenn das Gerät längere Zeit nicht verwendet werden soll,
trennen Sie das Netzkabel vom Netzstecker.
• Débrancher le cordon d’alimentation lorsque l’appareil n’est
pas utilisé pendant de longues périodes.
• Scollegate il cavo di alimentazione quando prevedete di non
utilizzare l’unità per un lungo periodo di tempo.
• Desconecte el cordón de energía cuando no utilice el equipo
por mucho tiempo.
•
Neem altijd het netsnoer uit het stopkontakt wanneer het
apparaat gedurende een lange periode niet wordt gebruikt.
• Koppla loss nätkabeln om apparaten inte kommer att
användas i lång tid.
* (For apparatuses with ventilation holes)
• Do not obstruct the ventilation holes.
• Decken Sie den Lüftungsbereich nicht ab.
• Ne pas obstruer les trous d’aération.
• Non coprite i fori di ventilazione.
• No obstruya los orificios de ventilación.
• De ventilatieopeningen mogen niet worden beblokkeerd.
• Täpp inte till ventilationsöppningarna.
• Do not let foreign objects into the unit.
•
Lassen Sie keine fremden Gegenstände in das Gerät kommen.
• Ne pas laisser des objets étrangers dans l’appareil.
• Non inserite corpi estranei all’interno dell’unità.
• No deje objetos extraños dentro del equipo.
• Laat geen vreemde voorwerpen in dit apparaat vallen.
• Se till att främmande föremål inte tränger in i apparaten.
• Do not let insecticides, benzene, and thinner come in
contact with the unit.
• Lassen Sie das Gerät nicht mit Insektiziden, Benzin oder
Verdünnungsmitteln in Berührung kommen.
• Ne pas mettre en contact des insecticides, du benzène et
un diluant avec l’appareil.
• Assicuratevi che l’unità non entri in contatto con insetticidi,
benzolo o solventi.
• No permita el contacto de insecticidas, gasolina y diluyentes
con el equipo.
• Voorkom dat insecticiden, benzeen of verfverdunner met dit
toestel in contact komen.
• Se till att inte insektsmedel på spraybruk, bensen och
thinner kommer i kontakt med apparatens hölje.
• Never disassemble or modify the unit in any way.
• Versuchen Sie niemals das Gerät auseinander zu nehmen
oder zu verändern.
• Ne jamais démonter ou modifier l’appareil d’une manière ou
d’une autre.
• Non smontate né modificate l’unità in alcun modo.
• Nunca desarme o modifique el equipo de ninguna manera.
• Dit toestel mag niet gedemonteerd of aangepast worden.
• Ta inte isär apparaten och försök inte bygga om den.
nNOTE ON USE / HINWEISE ZUM GEBRAUCH / OBSERVATIONS RELATIVES A L’UTILISATION / NOTE SULL’USO /
NOTAS SOBRE EL USO / ALVORENSTE GEBRUIKEN / OBSERVERA ANGÅENDE ANVÄNDNINGEN

III
ITALIANO ESPAÑOL NEDERLANDS SVENSKADEUTSCH FRANCAISENGLISH
A NOTE ABOUT RECYCLING:
This product’s packaging materials are recyclable and can be reused. Please dispose of any materials
in accordance with the local recycling regulations.
When discarding the unit, comply with local rules or regulations.
Batteries should never be thrown away or incinerated but disposed of in accordance with the local
regulations concerning battery disposal.
This product and the supplied accessories, excluding the batteries, constitute the applicable product
according to the WEEE directive.
HINWEIS ZUM RECYCLING:
Das Verpackungsmaterial dieses Produktes ist zum Recyceln geeignet und kann wieder verwendet
werden. Bitte entsorgen Sie alle Materialien entsprechend der örtlichen Recycling-Vorschriften.
Beachten Sie bei der Entsorgung des Gerätes die örtlichen Vorschriften und Bestimmungen.
Die Batterien dürfen nicht in den Hausmüll geworfen oder verbrannt werden; bitte entsorgen Sie die
Batterien gemäß der örtlichen Vorschriften.
Dieses Produkt und das im Lieferumfang enthaltene Zubehör (mit Ausnahme der Batterien!)
entsprechen der WEEE-Direktive.
UNE REMARQUE CONCERNANT LE RECYCLAGE:
Les matériaux d’emballage de ce produit sont recyclables et peuvent être réutilisés. Veuillez disposer
des matériaux conformément aux lois sur le recyclage en vigueur.
Lorsque vous mettez cet appareil au rebut, respectez les lois ou réglementations en vigueur.
Les piles ne doivent jamais être jetées ou incinérées, mais mises au rebut conformément aux lois en
vigueur sur la mise au rebut des piles.
Ce produit et les accessoires inclus, à l’exception des piles, sont des produits conformes à la directive
DEEE.
NOTA RELATIVA AL RICICLAGGIO:
I materiali di imballaggio di questo prodotto sono riutilizzabili e riciclabili. Smaltire i materiali conformemente alle
normative locali sul riciclaggio.
Per lo smaltimento dell’unità, osservare le normative o le leggi locali in vigore.
Non gettare le batterie, né incenerirle, ma smaltirle conformemente alla normativa locale sui rifiuti chimici.
Questo prodotto e gli accessori inclusi nell’imballaggio sono applicabili alla direttiva RAEE, ad eccezione delle batterie.
ACERCA DEL RECICLAJE:
Los materiales de embalaje de este producto son reciclables y se pueden volver a utilizar. Disponga de estos materiales
siguiendo los reglamentos de reciclaje de su localidad.
Cuando se deshaga de la unidad, cumpla con las reglas o reglamentos locales.
Las pilas nunca deberán tirarse ni incinerarse. Deberá disponer de ellas siguiendo los reglamentos de su localidad
relacionados con los desperdicios químicos.
Este producto junto con los accesorios empaquetados es el producto aplicable a la directiva RAEE excepto pilas.
EEN AANTEKENING MET BETREKKING TOT DE RECYCLING:
Het inpakmateriaal van dit product is recycleerbaar en kan opnieuw gebruikt worden. Er wordt verzocht om zich van elk
afvalmateriaal te ontdoen volgens de plaatselijke voorschriften.
Volg voor het wegdoen van de speler de voorschriften voor de verwijdering van wit- en bruingoed op.
Batterijen mogen nooit worden weggegooid of verbrand, maar moeten volgens de plaatselijke voorschriften betreffende
chemisch afval worden verwijderd.
Op dit product en de meegeleverde accessoires, m.u.v. de batterijen is de richtlijn voor afgedankte elektrische en
elektronische apparaten (WEEE) van toepassing.
OBSERVERA ANGÅENDE ÅTERVINNING:
Produktens emballage är återvinningsbart och kan återanvändas. Kassera det enligt lokala återvinningsbestämmelser.
När du kasserar enheten ska du göra det i överensstämmelse med lokala regler och bestämmelser.
Batterier får absolut inte kastas i soporna eller brännas. Kassera dem enligt lokala bestämmelser för kemiskt avfall.
Denna apparat och de tillbehör som levereras med den uppfyller gällande WEEE-direktiv, med undantag av
batterierna.


ENGLISH
Connections Playback Recording and Editing Troubleshooting Specifications
Accessories ·····················································································1
Special Features of This Device ····················································1
Cautions on Handlings···································································1
Cleaning ·························································································1
Assembly·························································································2
Changing the Stylus·······································································2
Removing the Replaceable Stylus··················································2
Mounting the Replaceable Stylus ··················································2
Part Names and Functions·····························································3
Getting Started
qOwner’s manual ...................................................................... 1
wService station list ................................................................... 1
ePlatter ...................................................................................... 1
rRubber mat.............................................................................. 1
tEP adapter ............................................................................... 1
yTrans Music Manager (for DENON) disk (CD-ROM)................1
Check that the following parts are supplied with the product.
Note that the illustrations in this instructions may differ from the actual
set for explanation purposes.
1. Record analog records to a USB flash drive
• You can play back the tracks recorded on the USB flash drive on
any audio device with USB playback.
• The “Trans Music Manager” software supplied with the DP-
200USB enables you to edit music files and titles on your PC.
2. Easy-to-operate, fully automatic player
Simply press START button to start playing an analog record. When
the record is finished the tone arm automatically returns to its
original position and the turntable stops.
3. Equalizer switch provided
The equalizer switch enables you to connect to a variety of audio
devices such as pre-main amplifiers and radio cassette players.
4. Lightweight, compact design
The lightweight, compact design makes it easy to use anywhere.
Connections ····················································································4
Connecting the Power Cord···························································4
Connections
Preparations····················································································5
Preparing to Play a Record ·····························································5
Playing an Analog Record······························································5
Auto Start·······················································································5
Manual Start···················································································5
Stopping a Record During Playback ···············································5
Playback
Recording an Analog Record and Editing the Recording············6
Cautions to Observe When Recording or Editing ··························7
Recording ························································································8
Recording to a USB Flash Drive ·····················································8
Editing ·····························································································8
Shall be Enabled byTrans Music Manager for DENON··················8
Recommended System Requirements for Using Trans Music
Manager·························································································8
Installing “Trans Music Manager”··················································8
Editing with Trans Music Manager·················································8
Recording and Editing
Troubleshooting ·································································9
Specifications····································································10
e r t y
Accessories
Cautions on Handling
Cleaning
• Use a wiping cloth and wipe lightly to remove dirt from the cabinet
and operation panel.
When using chemically treated cloths, follow the precautions that
have been written for them.
• Do not use benzene, thinners, or other organic solvents or insecticides
on the unit since they may cause a change in quality or color.
• Moving the unit
To prevent short-circuits or damaged wires in the connection cables,
always unplug the power supply cord and disconnect the connection
cables between all other audio components when moving the unit.
nContents
Thank you for purchasing this DENON product. To ensure proper
operation, please read this owner’s manual carefully before using the
product.
After reading them, be sure to keep them for future reference.
Getting Started Special Features of This Device
Getting Started


ENGLISH
Connections Playback Recording and Editing Troubleshooting Specifications
Before assembly, remove all packaging material except for the plastic
tie securing the tone arm and open the dust cover. Leave the plastic
tie securing the tone arm until assembly is complete.
1Set the equalizer switch to the appropriate position
for the type of input terminal on the device connected
to the DP-200USB.
ON : When connecting to an AUX input terminal or an input
terminal other than “PHONO” (default setting at time of
purchase).
OFF : When connecting to a PHONO input terminal.
2Mount the platter on the center spindle.
Turn the platter so that the drive roller is visible through the
opening in the platter.
3Take hold of the ribbon tape attached to the drive belt
on the underside of the platter and hook the drive belt
onto the driving roller.
• Remove the ribbon tape after hooking the belt onto the roller.
• Turn the platter by hand until the drive belt is positioned at the
center of the driving roller.
4Place the rubber mat on the platter.
NOTE
If the equalizer switch is not set correctly, the sound will be extremely
weak or distorted.
nBefore replacing the stylus
Unplug the player at the wall socket.
Rubber mat
Platter
OFFON
Center spindle
Equalizer switch
Platter
Ribbon tape
Driving roller
Drive belt
1
1
2
2
1
2
3
Cartridge
Stylus
Stylus
Cartridge
4Assembly Changing the Stylus
The stylus supplied with the DP-200USB has a life of approximately
400 hours. Be sure to replace it in good time to avoid damaging your
precious records.
nCleaning the tip of the stylus
The tip of the stylus is extremely delicate and should be handled with
great care. Use a soft brush to gently remove any dust from the tip.
Hold the cartridge steady with one hand, grasp the stylus
with the other hand, push down in the direction of arrow
qand then gently pull the stylus off in the direction of
arrow w.
Removing the Replaceable Stylus
Hold the cartridge steady with one hand, grasp the stylus
with the other hand, point the catch on the stylus in the
direction of arrow qand insert it fully into the long
opening in the cartridge, then push up in the direction of
arrow wuntil it clicks.
Mounting the Replaceable Stylus
Getting Started
Stylus cover
Stylus cover


ENGLISH
Connections Playback Recording and Editing Troubleshooting Specifications
q er ty u i o Q0w Q1
Q2 Q3Q4 Q5 Q6 Q7 Q8 Q9
For buttons not explained here, see the page indicated in parentheses
( ).
qSpeed button (SPEED 33 j /45 h )············································ (5)
wPower operation button (POWER h ON/ j OFF)···················· (5)
eUSB indicator············································································· (8)
rUSB port····················································································· (8)
tRecording indicator··································································· (8)
yREC ON/OFF button·································································· (8)
uRubber mat ················································································ (2)
iPlatter························································································· (2)
oSTART button ············································································ (5)
Q 0 STOP button ·············································································· (5)
Q1 Record size lever (SIZE 30/17)·················································· (5)
Q2 Dust cover ·················································································· (5)
Q3 EP adapter holder······································································ (5)
Keep your EP adapter here when not in use.
Q4 Dust cover hinge
Q5 Equalizer amplifier switch ························································ (2)
Q6 Spindle ······················································································· (2)
Q7 Cartridge (record stylus) ··························································· (5)
Q8 Tone arm rest
Q9 Finger lift···················································································· (5)
W0 Audio cable (Cord length: Approx. 1 m) ····································· (4)
W1 Power cord (Cord length: Approx. 1.8 m)··································· (4)
W0 W1
<Front>
<Rear>
Part Names and Functions
Getting Started


ENGLISH
Getting Started Playback Recording and Editing Troubleshooting Specifications
アンプ
1)0/0
- 3
Wait until all connections have been completed before connecting
the power cord.
NOTE
Insert the AC plugs securely. Incomplete connections could cause
noise.
NOTE
• Do not plug in the power cord until all connections have been completed.
• When making connections, also refer to the operating instructions of the other components.
• Be sure to connect the left and right channels properly (left with left, right with right).
• Do not bundle power cords together with connection cables. Doing so can result in humming or noise.
"69
- 3
nWhen connecting to an AUX input terminal or an
input terminal other than “PHONO”
nWhen connecting to a PHONO input terminal
Amplifier Radio cassette
player / Mini
stereo system
NOTE
Set the equalizer switch to the correct setting for the type of input terminal on the device to which the DP-200USB is being
connected.
For details, refer to “Assembly” (vpage 2).
OFF
ON
Equalizer switch: OFF
OFF
ON
Equalizer switch: ON
To household power outlet
(AC 230 V, 50 Hz)
Connections
Connections
Connecting the Power Cord
Connections


ENGLISH
Getting Started Connections Recording and Editing Troubleshooting Specifications
1Press POWER (hON).
bTo turn power off, press POWER again.
2Open the dust cover and place an analog record on the rubber mat.
bUse the EP adapter when playing an EP record.
3Set the record’s playing speed using SPEED.
[Settable Items] j33 : 33-1/3 rpm
h 45 : 45 rpm
4Set the record’s size using SIZE.
[Settable Items] 30 : 30 cm
17 : 17 cm
5Raise the stylus cover.
POWER REC START STOP
SIZE
SPEED
NOTE
The DP-200USB cannot play music recorded on a USB flash drive
connected to the player.
The DP-200USB can play analog records.
It also enables you to record your records onto a USB flash drive. For
details on how to record to a USB flash drive, see “Recording and
Editing” (vpage 6).
Press STOP.
Playback stops and the tone arm returns to its original position.
Using the nger lift, move the tone arm to the position at
which you want to start playing and lower it carefully.
bWhen the record is finished, the tone arm returns to its original
position and the turntable stops automatically. (Auto return
function)
NOTE
•Be careful not to scratch the record when moving the tone arm.
•Do not touch the tone arm or turntable or turn off the power while
a record is playing. Doing so can disrupt the sound or damage the
record.
•The auto start function cannot be used for 25 cm records. Records
of this size should be started manually.
•The auto return function is activated when the tone arm reaches a
specific point near the center of the record. In the case of a non-
standard record with grooves extending beyond this point, the auto
return function may be activated before the record has stopped
playing.
Press START.
The record starts playing automatically.
bWhen the record is finished, the tone arm returns to its original
position and the turntable stops automatically. (Auto return
function)
bTo stop playing a record, turn the POWER “jOFF”.
Preparations
Playback
Preparing to Play a Record
Playing an Analog Record
Auto Start
Manual Start
Stopping a Record During Playback
Playback


ENGLISH
Getting Started Connections Playback Troubleshooting Specifications
Track 1 / Track 2 / Track 3 / Track 4
Track 1 Track 2 Track 3 Track 4
Add
information
such as the
title of the
track or album
or the name
of the artist
There are two ways to do this.
q Download from “MusicIDz”.
zA system for retrieving
information on music tracks
from Gracenote’s CD database.
wEnter the information using
your personal computer’s
keyboard.
Edited files can be saved on your personal computer.
(You can also save them onto a USB flash drive.)
You will need the following items:
USB flash drive
• Create a new file for each recording operation.
• Create MP3 music files.
• With a 1 GB USB flash drive, you can store up to
approximately 30 LP analog records.
Personal computer
USB flash drive containing edited (or recorded) files
Audio device with USB input
Editing
DP-200USB
A personal computer connected to the Internet
Trans Music Manager (CD-ROM)
A USB flash drive containing your recording
Recording Playback
Analog record
Split
or
Record
USB flash drive
Split files
Delete files Delete Track 2
Track 1 Track 2 Track 3 Track 4
Track 1 Track 3 Track 4
Playing on
an audio
device
Play on an audio device with a
USB port.
(When the file has been edited
on a personal computer, transfer
the data to a USB flash drive.)
Playing on
a personal
computer
Play using theTrans Music
Manager software or the
audio player software
installed on your personal
computer.
Recording an Analog Record and Editing the Recording
Recording and Editing
You will need the following items: You will need the following items:
Recording and Editing


ENGLISH
Getting Started Connections Playback Troubleshooting Specifications
About USB Flash drive
• Only use a USB flash drive. Do not connect any other USB device.
• When a USB flash drive is connected to DP-200USB, DENON
accepts no liability in the event of the USB flash drive’s data loss or
damage. Be sure to back up important data.
• The USB flash drive does not operate via a USB hub.
• Operation and power supply are not guaranteed for all USB flash
drives.
• The main unit’s USB port cannot be connected to a PC using a USB
cable.
• Insert the USB flash drive straight and fully into the USB port. Avoid
inserting at an angle as this can cause damage.
• You cannot use USB flash drives that are copyright protected.
• You cannot record on an external hard disk drive.
• You cannot record via a USB cable (including extension cable).
About Compatible OS and Personal Computers
• The following OS are compatible. Windows 2000 / Windows XP /
Windows Vista (The display screen may differ in part depending on
the personal computer.)
• You cannot output information to a personal computer by connecting
the main unit to a personal computer.
• Operations such as system suspend, sleep (standby mode),
hibernation, etc., cannot be guaranteed for all PCs.
Cautions to Observe When Recording or
Editing
Cautions When Recording
• Do not remove the USB flash drive during recording.
Doing so will prevent recording from taking place. Make sure that
recording has finished before removing the USB flash drive.
• If the USB flash drive becomes full during recording, the recording
operation will stop and the USB indicator will turn off.
• Although the tone arm will return to its original position at the end of
the record, the USB flash drive does not stop recording automatically.
To stop recording, press the REC button.
• The recording level of the USB flash drive is fixed. To adjust the
volume when playing the music, use the volume controls on the
audio device being used.
• If the REC button is turned on and then off again in less than one
second, no recording will take place.
• If you record both sides of an analog record without stopping, the
recording will contain a long period of silence while changing from
side A to side B. To prevent this, you should stop recording after side
A and start again to record side B.
Notes on Downloading Track Information
You can use the “Trans Music Manager” software included with the
DP-200USB to download information on the recorded track (the title of
the track or album or the name of the artist, etc.) from the Gracenote
website.
• Downloading with Trans Music Manager.
qRead out the opening few seconds of the recorded track’s audio
waveform.
wSearch for a matching waveform in Gracenote®’s CD database.
∙ If a match is found, the title of the track is displayed in the
download list.
eDownload the information.
• Track information cannot be downloaded in the following cases. In
such cases, you should enter the information yourself.
∙ When the recorded record has not been released as a CD.
∙ When the recording contains excessive noise due to use of a
worn stylus or a similar problem with recording quality.
∙ When the sound quality of the CD version of the record has been
enhanced by remastering, etc.
Recording and Editing


ENGLISH
Getting Started Connections Playback Troubleshooting Specifications
3Press REC.
• The Recording indicator lights red (preparing to record).
• The Recording indicator blinks red and recording starts.
bThe time from pressing REC (the recording indicator lights red) to
when recording starts (the red light blinks) varies with the USB
flash drive capacity and type. Check the time to start of recording
beforehand.
4Press START.
bIf you are starting the record manually, use the finger lift to move
the tone arm to the position at which you want to start playing
and lower it carefully.
You can use Trans Music Manager to perform the following
functions.
nFile Splitter
• Auto MP3 Splitter
• Manual MP3 Splitter
nMusicID (Addition of track information)
• Track name, Artist name, Album name, etc.
• Access Gracenote®on the internet
• Character Entry
nFile deletion
About Gracenote MusicIDSM Music Recognition
Service
“Gracenote MusicIDSM music recognition service” is a service offered
by Gracenote®that is commonly known as CDDB®.
The service lets you automatically obtain CD titles, artist names, track
names, etc., in text format by connecting to the Gracenote®server
on the Internet.
• A personal computer running Windows 2000/Windows XP/
Windows Vista
• An HDD with a minimum of 30 MB free space
• A USB 2.0 port
NOTE
• When removing the USB flash drive, gently hold the DP-200USB
with your other hand to keep it steady.
• Do not remove the USB flash drive during recording.
Trans Music Manager is a trademark and registered trademark of
Trans Technology, Inc.
Information concerning music identification technology is offered
by Gracenote, Inc.
Gracenote®and CDDB®are registered trademarks of Gracenote.
Installing “Trans Music Manager”
1Insert the included CD-ROM (Trans Music Manager)
in your PC.
The top menu screen is displayed.
bIf the top menu screen is not displayed, open the CD-ROM drive
under “My Computer” and start “TMMLaunch.exe”.
2Click on “Trans Music Manager installation”.
The InstallShield Wizard screen is displayed.
3Operate while reading the screen explanations.
Installation starts.
4Click on “Finish”.
Installation finishes.
Editing withTrans Music Manager
For details of the editing operation, refer to the “Simple User’s Guide”
which is included on the CD-ROM supplied with the DP-200USB.
Editing
Shall be Enabled byTrans Music Manager
for DENON
Recommended System Requirements
for UsingTrans Music Manager
REC START
USB port
1Prepare the analog record you want to record for playing (vpage 5 “Preparing to Play a Record”).
qPlace the record on the rubber mat.
wSet the record’s playing speed.
eSet the record’s size.
rTurn the power on.
2Insert a USB ash drive into the USB port.
The USB indicator lights green.
bIf the USB flash drive has a write protection switch, make sure
that it is in the unlocked position.
Recording
Recording to a USB Flash Drive
Recording and Editing
nTo Stop Recording
Press REC.
• The Recording indicator turns off.
The included “Trans Music Manager” can be used to delete silent
sections recorded before and after a track.
qCreate a single track from the section to be deleted.
“Manual MP3 Splitter” (vBrief manual (CD-ROM) page 11)
wDelete the track created in step q.
“Deleting tracks” (vBrief manual (CD-ROM) page 28)


ENGLISH
Getting Started Connections Playback Recording and Editing Specifications
If a problem should arise, first check the following:
1. Are the connections correct?
2. Is the set being operated as described in the owner’s manual?
If this unit does not operate properly, check the items listed in the table below. Should the problem persist,
there may be a malfunction.
In this case, disconnect the power immediately and contact your store of purchase.
Status Check Page
Power does not
turn on.
• Is the DP-200USB’s power cord plugged into the wall socket
properly?
• Is the power button “ h ON”?
4
5
The turntable
does not turn.
• Is the DP-200USB’s power cord plugged into the
wall socket properly?
• Is the drive belt attached properly to both the
platter and the driving roller? If the drive belt has
become detached, reattach it to the platter first
and then hook it onto the driving roller.
For details, refer to “Assembly” (vpage 2).
4
2
No sound is
produced
• Is the audio cable connected properly?
• Has the amplifier been set correctly for use with the DP-200USB
audio cable?
• Is the replaceable stylus mounted in the cartridge properly?
4
4
2
The sound is
scratchy, the
stylus skips or
the sound is
distorted.
• Is the stylus or the record dirty?
• Is the stylus worn or the record scratched?
2
2
The tone arm
does not move
even when the
START button is
pressed.
• Is the DP-200USB’s power cord plugged into the wall socket
properly?
• Is the power button “hON”?
• Is the tone arm secured to the armrest?
4
5
3
Status Check Page
The USB flash
drive is not
recognized.
• Is the USB flash drive inserted fully into the port?
• Is the USB flash drive full?
8
8
Nothing is
recorded on the
USB flash drive.
• Is the USB flash drive inserted fully into the port?
• Is the USB flash drive full?
• The USB flash drive is incompatible with the personal computer.
• Was the USB flash drive removed during recording (without stopping
recording)?
8
8
8
8
The USB flash
drive cannot be
formatted.
• You cannot format a USB flash drive with the DP-200USB. To format
the flash drive, use your personal computer.
–
GUSB flash driveH
Status Check Page
Files cannot be
edited
• Have you installed the CD-ROM supplied with the DP-200USB on
your personal computer?
• Has the file been recorded on the USB flash drive properly? (Has the
file of the track been created in the folder properly?)
• Is your personal computer connected to the Internet?
(Track information cannot be downloaded if you are not connected to
the internet.)
8
–
6
Files cannot be
batch split
• Change the batch split setting menu and try the batch splitting
operation again.
• Batch splitting of files is not possible under certain recording
conditions. In such cases, the files can be split manually.
8
8
Track information
does not
download
• Is your personal computer connected to the Internet?
• Track information cannot be downloaded in the following cases.
∙ When the record concerned has not been released as a CD (it is not
in the CD database).
∙ When the sound has not been recorded properly due to a worn
stylus.
∙ When the sound quality of the CD version of the record concerned
has been enhanced by remastering, etc.
6
7
Track information
is acquired only
for some of the
files of a recorded
album
• Select “Identify tracks as albums” when searching MusicID.
• Even if the search finds only one matching track in the album, you can
obtain the track information from the album list manually.
8
8
GEditingH
GPlaying recordsH
Troubleshooting
Platter
(Underside)
Belt
Troubleshooting

0
ENGLISH
Getting Started Connections Playback Recording and Editing Troubleshooting
nTurntable
Drive system: Belt drive
Motor: DC servo motor
Speed: 33-1/3, 45 rpm
Wow & flutter: 0.15 % WRMS
Tone arm: Dynamic balanced type
Effective arm length: 195 mm
Cartridge: MM type
Output voltage: Equalizer OFF: 2.5 mV
Equalizer ON : 150 mV
Optimal stylus pressure: 3.5 g
Replaceable stylus number: DSN-84
USB port : USB recording, compatible with USB A and USB 1.1
nGeneral
Power supply: AC 230 V, 50 Hz
Power consumption: 12 W
Maximum external dimensions: With dust cover closed: 360 (W) × 98 (H) × 358 (D) mm
With dust cover open: 360 (W) × 415 (H) × 363 (D) mm
Weight: 3.2 kg
zFor purposes of improvement, specifications and design are subject to change without notice.
Specifications
Specifications

D&M Holdings Inc.
Printed in China 5411 10165 107D
www.denon.com