Denon DP-300F User manual

DP-300F
Turntable
Main Features
■Refined External Design
The DP-300F's 4mm-thick cabinet wall that offers both strength and high density has
been beautifully finished with a gloss coating. The straight tone arm and aluminum
diecast turntable have been formed in a slim, textually attractive design. With a body
width of 434mm, it combines very elegantly with full-size system components.
■ Fully Automatic Player
When the 30cm or 17cm record size is selected, with a simple operation the tone arm
automatically moves and plays the record and then returns when playback ends.
Different cartridges can be used as desired, and since fine adjustments can also be
made for anti-skating and zero balance, ideal conditions for playing a record can be
achieved.
■ Straight Tone Arm
The DP-300F's straight tone arm brings out the maximum performance of cartridges
with superior tracing capabilities. The supplied cartridge can be replaced with a variety
of commercially available cartridges. (Compatible cartridge weight: 5.0 - 10.0 g)
■ Includes High-grade MM Cartridge
■ Diecast Aluminum Turntable
The DP-300F's turntable has been constructed of diecast aluminum to achieve high
inertial mass for stable rotation. The vibration-resistant turntable sheet is about 5mm
thick and uses hologram vibration analysis to improve its ability to hold a record.
■ Built-in PHONO Equalizer
Since the DP-300F includes a built-in PHONO equalizer, it can be connected directly to
a mini component or integrated amp that does not have a PHONO terminal.
(ON/OFF switchable)
■ Manual Arm Lifter
The DP-300F is also equipped with an arm lifter mechanism to facilitate manual
operation. The arm lifter makes it easy to place or remove the needle from any location
on the record.
Specifications
Motor Section
Drive system Belt drive
Speed 33 1/3, 45 rpm
Wow & flutter 0,10% (WRMS)
Turntable Diecast aluminum
Tone arm
Type Straight
Effective length 221.5 mm, 8.72 inch
Overhang 19 mm, 0.75 inch
Tracking error Within 3°
Stylus pressure range 0 – 4.0g (0.1g increments)
Compatible cartridge weight 5.0 – 10.0g (excluding headshell)
Cartridge
Type MM
Appropriate needle pressure 2.0g
Cartridge weight 5g
Replacement needle DSN-85
Supplied headshell weight 10g
(Can be replaced with dedicated shell:
PCL-310SP [Premium Silver] or PCL-310K [Black])
General
Power supply AC 120V, 60 Hz
Power consumption 2W
Dimensions 434 (W) x 122 (H) x 381 (D) mm
17.1 (W) x 4.8 (H) x 15.0 (D) inch
(including feet)
Weight 5.5 kg, 12.13 lbs
16510406 A
*Design and specifications are subject to change without notice.
Denon Brand Company
D&M Building, 2-1 Nissin-cho, Kawasaki-ku, Kawasaki-shi, Kanagawa, 210-8569 Japan
www.denon.com
Denon Electronics (USA), LLC.
19C Chapin Road, Suite 205 Pine Brook, N.J. 07058-9385 USA
TEL: [phone] usa.denon.com
Denon Canada Inc.
505 Apple Creek Blvd, Unit 5, Markham, Ontario, Canada L3R 5B1
TEL: [phone] ca.denon.com
DP300F_E3_usletter.qxd 06.3.17 2:12 PM Page 1