NEW MODEL INFORMATION
DP-500M
Analog Turntable
■Direct Drive with Encoder and High-Torque Motor
The DP-500M uses a quartz lock servo that controls platter rotation via
intervals of optical pulses passing through a slit. This control system
ensures accurate rotation with no deviation from the center. The devel-
opment of a high-torque motor (4.5 kg•cm) has boosted start-up speed
to 0.3 second, providing quick operation and stable rotation.
■Large 13 inch Turntable with Minimized Howling
Silicon rubber, a deadening material, has been applied over the entire
reverse side of the large diecast aluminum platter to minimize howl-
ing. Hologram vibration analysis was used to improve the ability of the
supplied platter sheet to "hold" the record. A slight cone-shaped taper
has even been applied to the sheet.
■RCA Pin-type Output
RCA pin-type output has been used for the DP-500M, providing greater
flexibility when changing RCA cables to match sound quality or car-
tridge impedance.
■Strong, Compact Cabinet Made of MDF (Medium Density Fiberbord)
The cabinet has been constructed in a compact size despite the large
plattter size to improve rigidity and minimize howling. The MDF material
offers performance close to natural wood, while also imparting a soft finish
and elegant appearance.
■Sensitive Tonearm of High-end Quality
The DP-500M's tonearm has been designed for optimum sound quality
through the use of diecast parts throughout to boost rigidity and careful-
ly placed deadening material to minimize vibration. This universal-type
tonearm accommodates a wide variety of cartridges.
■Large insulator eliminates external vibration.
■Includes aluminum diecast headshell. (Cartridge not included.)
* Cartridge not included
DENON ELECTRONICS (USA), INC.
19 CHAPIN ROAD, P.O. BOX 867, PINE BROOK, NJ 07058-9777 USA
TEL: 973-396-0810 www.usa.denon.com
DENON CANADA INC.
505 APPLE CREEK BLVD. UNIT 5 MARKHAM, ONTARIO L3R 5B1 CANADA
TEL: 905-475-4085 www.denon.ca
DENON, LTD.
3-16-11 YUSHIMA, BUNKYO-KU, TOKYO 113-0034 JAPAN
13220703 A
Specifications
■ Phono Motor Section
Drive system: Quarts lock servo control direct drive system
Speed: 33-1/3, 45 rpm
Speed deviation: 0.002% or less
Wow & flutter: 0.1% or less (wrms)
Rotation stability time: 0.3 sec. or less to reach normal speed
Turntable platter: Aluminum Diecast, 331 mm
(treated with silicon rubber on reverse side to absorb vibration)
Load characteristics: 0% (under stylus pressure 80 g)
■ Tonearm Section
Type: Static balance type, light weight S-shaped tonearm
Effective length: 230 mm, 9.06 inch
Overhang: 15 mm, 0.6 inch
Tracking error: Within 3°
Stylus pressure range: 0 - 4.0 g (0.25 g increments)
Acceptable weight of cartridge: 5.0 - 11.0 g (incl. screws and nuts)
(* The weight of accessorius headshell is 9.0 g.)
■ General
Power Supply: AC120V, 60 Hz
Power Consumption: 10W
Dimensions: 450 (W) x 170 (H) x 370 (D) mm (incl. feet),
17.7 (W) x 6.7 (H) x 14.6 (D) inch
Weight: 10.1 kg, 22.2 lbs.
Accessories: Headshell, Counter Weight, Hinges, RCA cable, EP adapter
