Dentsply Sirona SINIUS Technical specifications

SINIUS
Brief operating instructions
6322858 KGBA SINIUS EN.book Seite 1 Montag, 10. April 2017 4:25 16

2Dentsply Sirona
Dear Customer,
You can use these brief operating instructions, valid for software
version 2.2 and higher, to quickly find the most important
control procedures and functions of your dental treatment
center.
However, they do not describe all of its functions. Therefore,
they cannot replace the complete operating instructions of your
dental treatment center, which contain many important descrip-
tions and warnings. The care and cleaning of your treatment
center are described thoroughly in the complete operating
instructions. A quick overview of the required measures is
provided in a document entitled "Care and Cleaning Plans for
the Treatment Center and the Instruments".
Your SINIUS ® team *
Table of contents
SINIUS overview .................................................................... 3
SINIUS CS overview ............................................................. 4
SINIUS TS overview ............................................................. 5
Power switch ........................................................................... 6
Main switch .............................................................................. 6
EasyTouch user interface .................................................. 7
Touchscreen ............................................................................ 8
Start program ......................................................................... 9
Instrument program .......................................................... 12
SIVISION program .............................................................. 16
Fixed keys of dentist element ....................................... 19
Setup Programs .................................................................. 23
Cursor control ...................................................................... 26
Programming chair programs ..................................... 28
Assistant element .............................................................. 29
Foot control .......................................................................... 30
4-way foot control ............................................................ 32
Headrest switches ............................................................. 33
SiroCam AF/AF+ intraoral camera ........................... 34
SPRAYVIT M ......................................................................... 39
SIROSONIC TL ...................................................................... 41
Mini L.E.D. ............................................................................... 43
Implantology and endodontic treatments ............. 44
ApexLocator ......................................................................... 49
*SINIUS
® is a registered trademark of Sirona Dental Systems GmbH.
6322858 KGBA SINIUS EN.book Seite 2 Montag, 10. April 2017 4:25 16

Dentsply Sirona 3
SINIUS overview
* Maximum load from patient and accessories: 165kg
Dentist element instruments
* BL motor, BL ISO E motor, BL ISO C motor, or BL Implant motor
Assistant element instru-
ments
A Patient chair* E Assistant element
B Headrest F Water unit
C Foot control G Power switch and external
device connection
D Dentist element
Position 1 Positions
2, 3
Position 4 Position 5 Extra
holder
SPRAYVIT M Motor* Motor* SIROSONIC TL SiroCam
AF/AF+
High-
speed
handpiece
High-speed
handpiece
SiroCam AF/AF+
SIROSONIC TL
Position 1 Position 2 Position 3 Position 4
Mini L.E.D. SPRAYVIT M Spray aspirator Saliva ejector
Second spray
aspirator or saliva
ejector
6322858 KGBA SINIUS EN.book Seite 3 Montag, 10. April 2017 4:25 16

4Dentsply Sirona
SINIUS CS overview
* Maximum load from patient and accessories:: 165kg
Dentist element instruments
* BL motor, BL ISO E motor, BL ISO C motor, or BL Implant motor
Assistant element instru-
ments
A Patient chair* E Assistant element
B Headrest F Water unit
C Foot control G Power switch and external
device connection
D Dentist element
Position 1 Positions 2, 3 Position 4 Position 5
SPRAYVIT M Motor* Motor* SIROSONIC TL
High-speed
handpiece
High-speed
handpiece
SiroCam AF/AF+
SIROSONIC TL
Position 1 Position 2 Position 3 Position 4
Mini L.E.D. SPRAYVIT M Spray aspirator Saliva ejector
SiroCam AF/AF+
Second spray
aspirator or saliva
ejector
6322858 KGBA SINIUS EN.book Seite 4 Montag, 10. April 2017 4:25 16

Dentsply Sirona 5
SINIUS TS overview
* Maximum load from patient and accessories:: 165kg
Dentist element instruments
* BL motor, BL ISO E motor, BL ISO C motor, or BL Implant motor
Assistant element instru-
ments
A Patient chair* E Assistant element
B Headrest F Water unit
C Foot control G Power switch and external
device connection
D Dentist element
Position 1 Positions
2, 3
Position 4 Position 5 Extra
holder
SPRAYVIT M Motor* Motor* SIROSONIC TL SiroCam
AF/AF+
High-speed
handpiece
High-speed
handpiece
SiroCam AF/AF+
SIROSONIC TL
Position 1 Position 2 Position 3 Position 4
Mini L.E.D. SPRAYVIT M Spray aspirator Saliva ejector
SiroCam AF/AF+
Second spray
aspirator or saliva
ejector
6322858 KGBA SINIUS EN.book Seite 5 Montag, 10. April 2017 4:25 16

6Dentsply Sirona
Power switch
The power switch connects the treatment
center to the power supply. During longer
periods of disuse, the treatment center
should be disconnected from the power
supply. It then no longer consumes any
energy.
Main switch
Switching on the treatment center
The main switch switches the treatment
center from standby mode to operational
readiness.
Following switch-on, the operating system
is booted and an automatic self-test is
performed.
Switching the treatment center to
standby mode
Press and hold the main switch on the
dentist element until an acoustic signal
sounds. Then release the key.
The treatment center then shuts down
and switches itself to the standby mode.
The LED of the main switch goes out on
the dentist element.
6322858 KGBA SINIUS EN.book Seite 6 Montag, 10. April 2017 4:25 16

Dentsply Sirona 7
EasyTouch user interface
SINIUS and SINIUS TS
SINIUS CS
* The illustration shows the Standard Start program operating mode
A Fixed keys (membrane keyboard)
B Touchscreen (pressure-sensitive user interface)*
C Fixed keys (membrane keyboard)
DMainswitch
6322858 KGBA SINIUS EN.book Seite 7 Montag, 10. April 2017 4:25 16

8Dentsply Sirona
Touchscreen
Operating concept
The touchscreen displays virtual function
keys according to the program selected.
Required functions can be activated either
by touching the function keys with your
finger or via the cursor with the foot
control.
Function keys for functions not included
with the treatment center are not displayed
on the touchscreen.
Status bar
The status line is located at the bottom
edge of the screen. If multiple user profiles
are preselected, active user profiles A to F
are displayed with the current time
including seconds next to them. In addition,
status messages are displayed to indicate,
for example, the need to change the
amalgam separator, add water sanitizing
agent, charge the battery of the wireless
foot control, refill the cleaning agent for
chemical treatment of the suction hoses, as
well as the number of days left until the
next maintenance call or sanitization run
and error messages.
Sub-screens
Some programs are divided into a main
program and sub-screens. The function
keys for the basic functions are displayed in
the main programs. The sub-screen key
(two rectangles) leads to additional setting
options.
Settings screens
In many cases, functions can not only be
switched on or off, but also can be set. If a
function key is pressed and held (> 2 s), the
corresponding settings screen appears.
This screen is superimposed on the current
screen. The screen located in the back-
10:45:03 B
6322858 KGBA SINIUS EN.book Seite 8 Montag, 10. April 2017 4:25 16

Dentsply Sirona 9
ground is semitransparent and is tempo-
rarily disabled for input.
Settings screens and sub-screens are auto-
matically hidden after a certain period has
elapsed. The Back key (return arrow)
closes the opened screen immediately.
Background colors of keys
General functions are represented by gray
keys. If the corresponding function is
switched on or active, the key is displayed
orange.
Keys that initiate a dialog change or lead to
sub-screens and settings dialogs are
displayed blue.
As long as a key remains activated, its
active state is marked by a bold black
border.
Start program
Standard Start program
In the Standard Start program, the chair
program function keys and, in the case of a
motor-driven headrest, the Move headrest
in/out function keys are displayed on the
screen.
All other chair functions are listed sepa-
rately on the Manual chair adjustment
screen. This screen is accessed by pressing
the Manual chair adjustment key.
6322858 KGBA SINIUS EN.book Seite 9 Montag, 10. April 2017 4:25 16

10 Dentsply Sirona
EasyMode Start program
The EasyMode Start program operating
mode displays the function keys for the
patient chair programs and manual chair
adjustment, as well as the quick setting
keys for adjusting the intensity of the
instruments together on the same screen.
The main keys for the treatment are there-
fore always displayed on the touchscreen.
It is not necessary to switch between the
Start and Instrument programs. This makes
the operation of the dental treatment
center similar to other Dentsply Sirona
dental treatment centers that are operated
without a touchscreen.
You can set the operating mode you would
like to work with in the Setup screen:
Chair program S
Mouth rinsing position with memory func-
tion (freely assignable)
Chair program 0
Entry/exit position (freely assignable)
Chair programs 1 and 2
(freely assignable)
Move headrest in/out
(if a motor-driven headrest is installed)
Tilt headrest
(if a motor-driven headrest is installed)
Tilt patient couch
Compensated motion of the seat and back-
rest without compressing or stretching the
patient
Adjusting the chair height


6322858 KGBA SINIUS EN.book Seite 10 Montag, 10. April 2017 4:25 16

Dentsply Sirona 11
Select user profile
A stored user profile can be selected for up
to six different users (A to F).
X-ray viewer
Also white screen on SIVISION monitor for
SIVISION digital
Open manual chair setting program
Only in the Standard Start operating mode
Treatment function
Activation of the implantology/endodon-
tics functions
Open sub-screen
Access to additional subordinate functions;
see the following function keys:
Purge water lines
Manual process for purging instruments
Autopurge – Purge water lines automati-
cally
Automatic process for purging water-
conducting instruments
Sanitization
Starts the treatment center sanitization
program
Self-sufficient water supply
Operation of the treatment center with
self-sufficient water supply
Extract residual water
Extraction of residual water by standard
wet suction before cleaning the filter
External HF surgery unit
Activation of the protection against inter-
ference caused by an external HF unit
Apex measurement with file clamp
Activation of the ApexLocator for manual
measurement with the file clamp, showing
the distance display
6322858 KGBA SINIUS EN.book Seite 11 Montag, 10. April 2017 4:25 16

12 Dentsply Sirona
SPRAYVIT instrument light
Activates the instrument light on the
SPRAYVIT when it is removed from the
holder
Active lumbar function
Adjustment of active lumbar support
Instrument program
In the Standard Start program operating
mode, the instrument settings can be made
with static quick setting keys, program-
mable quick setting keys, or function levels.
Static quick setting keys
The values shown on the quick setting keys
can be selected by touching them briefly
(< 1 s).
Speed quick setting keys
For setting specified speeds or increments
BL, BL ISO C, and BL Implant motors:
min. 90 rpm, max. 40,000 rpm
BL ISO E motor:
min. 2000 rpm, max. 40,000 rpm
Intensity quick setting keys
For setting preset or intermediate intensity
values ranging from 1% to 100%
Setting speed and intermediate inten-
sity values with quick setting keys
Increase intensity: Press and hold (>1 s)
a quick setting key whose intensity
value is greater than or equal to the
value displayed in the first line.
Reduce intensity: Press and hold (>1 s) a
quick setting key whose intensity value
is less than the value displayed in the
first line.
Memory key (SaveMode)
After an instrument is deposited in its
holder, the settings made in the instrument
program are saved only if the Memory key
is first pressed and held >2 sec.
6322858 KGBA SINIUS EN.book Seite 12 Montag, 10. April 2017 4:25 16

Dentsply Sirona 13
In the Setup program, you can switch to
DropMode. The Memory key is then hidden
and when an instrument is deposited, the
settings made in the Instrument program
are automatically saved.
Programmable quick setting
keys
The key values can be changed individually
with the programmable quick setting keys.
The speed/intensity shown in the first line
can be increased or decreased by pressing
and holding (>1 s) the left or right - or +
quick setting key.
The programming mode is activated by
holding down the middle quick setting key
Set (> 2 s). The speed/intensity flashes on
the touchscreen and a flashing bar appears
behind the quick setting keys. Now press
the quick setting key to which the set value
is to be saved. A signal sounds as confirma-
tion. Further settings such as activation of
the coolant or Endo mode are also saved
on the quick setting key.
The settings can be recalled by touching
the respective quick setting key.
6322858 KGBA SINIUS EN.book Seite 13 Montag, 10. April 2017 4:25 16

14 Dentsply Sirona
Function levels
Briefly pressing the +/- keys (<1 s)
adjusts the speed in larger increments.
Pressing and holding the +/- keys (>1 s)
enables fine adjustment.
When using function levels, you have two
"storage locations" for each user profile
(E1/E2) that can be used to save settings
or call them up at the push of a button.
Functions of the instrument
program
Direction of rotation
Switches counterclockwise rotation ON/
OFF
The key is marked orange when CCW rota-
tion is activated.
Chip blower
Used to dry treatment areas or blow off
drilling chips by emitting air blasts from the
treatment instrument
This key is displayed only when cursor
control is activated
Boost function
Increases the intensity of the SIROSONIC
TL ultrasonic handpiece during treatment
in 20 steps in reference to the final value
Endo function
Activates the endodontics function of the
SIROSONIC TL ultrasonic handpiece
(power limit)
6322858 KGBA SINIUS EN.book Seite 14 Montag, 10. April 2017 4:25 16

Dentsply Sirona 15
Opening sub-screens
Used to access additional subordinate
functions; see the following function keys:
Coolant: cooling spray
Used to cool the treatment area with spray
Coolant: air
For cooling the treatment area with air
NaCl saline solution
For cooling the treatment area with sterile
saline solution
Setting the automatic motor stop of
the ApexLocator
When the Apex Stop key is pressed, the –
and + keys and the Auto-Reverse key are
displayed.
AutoReverse
Switches the ApexLocator auto-reverse
function on or off
Instrument light
Activates and sets the instrument light
Direct starter / speed foot control
Direct starter: Switches the instrument on
at the set speed or intensity
Speed foot control (highlighted orange):
Regulates the instrument up to the
maximum set speed or intensity depending
on the position of the foot control pedal.
Apex acoustic signals
Switches the apex acoustic signals on and
off
Apex distance acoustic signals
Switches the apex distance acoustic signals
on or off
6322858 KGBA SINIUS EN.book Seite 15 Montag, 10. April 2017 4:25 16

16 Dentsply Sirona
SIVISION program
The treatment center can be connected to
a PC via an Ethernet cable. The SIVISION
and/or SIUCOM plus PC application
enables communication between the treat-
ment center and the PC. SIUCOM plus is
required for PC control. The PC can be
operated directly on the touchscreen and
in conjunction with the SIROCAM AF/AF+
intraoral camera, with the foot control of
the treatment center as well.
For details, please refer to the "Installation
and Configuration of SIUCOM plus / SIVI-
SION connect" manual.
The treatment center can be operated with
the following PC versions:
•ExternalPC
The treatment center can be connected
to an external PC via an Ethernet cable.
PC applications such as Media Player,
Microsoft®PowerPoint®, SIDEXIS, or SI
Video can also be controlled from the
treatment center.
• Internal PC
The treatment center is operated as a
standalone unit without an external PC. A
mini PC is integrated in the base of the
chair instead. It is required to display the
camera images using the SI Video PC
application. It is not possible to control
additional PC applications with this
version.
• Operation without PC
The use of SIVISION is not possible.
The SI Video application is used in treat-
ment centers with external PC, on which
SIDEXIS is not installed, or with an internal
PC (standalone solution). In these cases, SI
Video serves as a video application for the
camera.
Starting PC communication
All PC applications which were started
from the treatment center have been
terminated.
SIUCOM plus has been started, e.g. via
Autostart.
6322858 KGBA SINIUS EN.book Seite 16 Montag, 10. April 2017 4:25 16

Dentsply Sirona 17
Touch the SIVISION program change
key next to the touchscreen on the left
side.
Or, if intraoral scans are desired:
Remove the camera from the holder.
The SIDEXIS or SI Video PC application
starts immediately.
The SIVISION dialog is displayed on the
touchscreen.
Select the PC application you would like
to communicate with.
For PC applications that access files on the
PC (e.g. Media Player, Microsoft Power-
Point), the File Selection screen opens.
Select the desired file by touching it.
A number of buttons which can be used to
control the selected PC application then
appear on the touchscreen.
The keys displayed on the touchscreen and
their arrangement are preconfigured at the
factory. The configuration can, however, be
individually customized - see "Installation
and configuration of SIUCOM plus /
SIVISION connect". You can also define
6322858 KGBA SINIUS EN.book Seite 17 Montag, 10. April 2017 4:25 16

18 Dentsply Sirona
there which file folder the File Selection
screen should access for each PC applica-
tion.
The following overview shows the keys
available for configuring the SIDEXIS and
Media Player PC applications.
Communication with
SIDEXIS
Media Player
Next image Contrast opti-
mization filter
Tiled layout Relief display
filter
Cascaded
layout
Smooth image
Status over-
view layout
Sharpen image
Full frame Undo
Zoom in/out Restore orig-
inal image
Rotate image
90° left/right
Close current
media window
Rotate image
180°
Close all media
windows
Previous/next
title
Mute
Stop playback Adjust volume
Start/interrupt
playback
6322858 KGBA SINIUS EN.book Seite 18 Montag, 10. April 2017 4:25 16

Dentsply Sirona 19
Fixed keys of dentist element
Program change keys
The program change keys allow the user to
switch between the main programs Start
program, Instrument program and SIVI-
SION program in the Standard Start
program operating mode.
In the EasyMode Start program operating
mode, the program change keys Chair and
Instrument can be used to switch to the
relevant sub-screens.
Fixed keys
Main switch
Switches the treatment center on/off [6].
Timer function
Triggers elapsed time, which is displayed in
the status bar of the touchscreen.
Presetting the timer
When the Timer key is pressed (>2 s), the
Timer function settings screen appears.
Select one of the four timers to change
its setting. Touch one of the selection
keys along the bottom edge of the
settings screen.
The selected timer is highlighted orange.
Use the – and + keys to set the desired
time.
Increments:
From 00:05 to 1:00 = 5-s increments
From 1:00 to 3:00 = 10-s increments
From 3:00 to 9:30 = 30-s increments
Select whether the time loop and the
acoustic signal should be activated/
deactivated for the selected timer.
Touch the Time loop and/or Acoustic
signal key.
If a function is switched on, the corre-
sponding key is highlighted orange.
6322858 KGBA SINIUS EN.book Seite 19 Montag, 10. April 2017 4:25 16

20 Dentsply Sirona
Select another timer for adjustment or
close the settings screen with the
Return key.
All settings are automatically saved
when the screen is closed.
Starting the timer
Press the Timer fixed key briefly.
The last timer used is started immedi-
ately. The set and elapsed time are
displayed in the status bar. The Timer
function screen remains visible.
If you wish to use a different timer,
touch one of the timers at the lower
edge of the screen.
Shock positioning
Immediately moves the patient chair to a
position for shock positioning of the
patient.
The position for shock positioning preset at
the factory can be reprogrammed.
Move the patient chair to the desired
position.
Press and hold the shock positioning
key >2 s.
Operating light
Switches the operating light on/off. If the
operating light key is pressed for >2 s, the
settings screen appears. For the LEDview,
the light as well as the distance from which
the no-touch sensor should react to move-
ments can be adjusted.
In the LEDview Plus, the color temperature
of the light can also be adjusted.
6322858 KGBA SINIUS EN.book Seite 20 Montag, 10. April 2017 4:25 16