Dentsply Sirona Nupro Freedom Installation guide

Maximizing
Performance
and Reliability
Special care instructions and tips
on how to care for your Nupro Freedom® System
Print the 8.5x11 Tip Card (page 2) to hang
in your operatory or reprocessing room.
© 2018 Dentsply Sirona
NUP08-0918-1
Nupro Freedom®
Cordless Prophy Package with SmartMode® Technology

Do not rinse inner
module under
the sink.
Running water may damage
internal components
Sheath and inner module
must be completely dry
after reprocessing and
before assembly.
Excess moisture may damage the unit.
Do not use spray products
or excessive liquids on
inner module.
Excessive liquids may penetrate the
inner module, causing failure.
Follow these top tips to help maximize the performance and lifespan of your Nupro Freedom® System.
Do not drop unit while
cleaning and during
prophy procedures.
Place the unit on a tray or the
cradle when not in use.
Use registered EPA
hospital disinfectants,
such as VoloWipes.
Unapproved chemicals may harm
the inner module.
Top opening on plastic
barrier must clear the
metal nose cone of the
inner module before
attaching the sheath.
Gently clean charging
contacts, the LED display
window and inner module.
Care should be taken in cleaning the
unit’s intricate workmanship.
Use pads of fingers to
operate power button.
Avoid using fingernails
and sharp objects.
Sharp objects may wear button down.
CARING FOR YOUR NUPRO FREEDOM® INNER MODULE
USING YOUR NUPRO FREEDOM® SYSTEM
!
!
!
!
!
!
!
!
!
© 2018 Dentsply Sirona
NUP08-0918-1

For Dentsply Sirona’s complete line
of hygiene handpieces and accessories,
disposable prophy angles and VoloWipes®
visit DentsplySirona.com
For Nupro Freedom® Service, contact
Customer Service at 1-800-989-8826.
USING YOUR NUPRO FREEDOM® SYSTEM
© 2018 Dentsply Sirona
NUP08-0918-1
A Lifetime of Oral Health.