Dentsply Sirona CEREC SpeedFire User manual

New as of: 01.2020
CEREC SpeedFire
Operating Instructions
English

Table of contents Dentsply Sirona
Operating Instructions CEREC SpeedFire
265 71 165 D3639
D3639.201.01.08.0201.2020
Table of contents
1General data ........................................................................................................... 5
1.1 Dear Customer,............................................................................................ 5
1.2 Contact data................................................................................................. 5
1.3 General information about this operating manual ........................................ 6
1.4 General conventions and structure of the document ................................... 7
1.4.1 Structure of the document.............................................................. 7
1.4.1.1 Identification of the danger levels................................. 7
1.4.1.2 Formats and symbols used .......................................... 8
1.4.2 Notes to the repository................................................................... 8
1.5 Scope of these Operating Instructions......................................................... 8
1.6 Warranty and liability.................................................................................... 9
1.7 Intended use ................................................................................................ 10
1.8 Legend ......................................................................................................... 11
2Safety instructions .................................................................................................. 13
2.1 Basic safety information............................................................................... 13
2.1.1 Prerequisites.................................................................................. 13
2.1.2 Maintenance and repair ................................................................. 13
2.1.3 Modifications to the product........................................................... 13
2.1.4 Accessories.................................................................................... 13
2.1.5 In case of damage ......................................................................... 14
2.2 Connecting the unit ...................................................................................... 14
2.3 Connection of external equipment ............................................................... 14
2.4 Patient environment ..................................................................................... 15
2.5 Ventilation slots............................................................................................ 16
2.6 Product-specific safety instructions.............................................................. 16
2.7 Insulation material of the furnace chamber.................................................. 17
3Product description ................................................................................................. 18
3.1 Main components of the product.................................................................. 18
3.2 Explanation of the symbols .......................................................................... 20
3.2.1 Main screen ................................................................................... 20
3.2.2 Information..................................................................................... 20
3.2.3 Job archive..................................................................................... 21
3.2.4 Settings.......................................................................................... 21
3.2.5 Back............................................................................................... 22
3.2.6 Multi-select..................................................................................... 22
3.2.7 Previous step ................................................................................. 22

Dentsply Sirona
Operating Instructions CEREC SpeedFire
Table of contents
65 71 165 D3639
D3639.201.01.08.0201.2020 3
3.2.8 Start of ........................................................................................... 22
3.2.9 Cancel............................................................................................ 23
3.2.10 Preheat .......................................................................................... 23
3.3 Standards/ approvals/ certifications ............................................................. 24
3.4 Technical data.............................................................................................. 25
3.5 Electromagnetic compatibility ...................................................................... 26
3.5.1 Electromagnetic emission.............................................................. 26
3.5.2 Interference immunity .................................................................... 27
3.5.3 Working clearances ....................................................................... 29
4Transport and commissioning................................................................................. 30
4.1 unpacking..................................................................................................... 30
4.2 Repacking .................................................................................................... 30
4.3 Disposal of packaging materials .................................................................. 30
4.4 Scope of delivery and accessories .............................................................. 31
4.5 Setup/connection ......................................................................................... 32
4.5.1 Transportation without packaging.................................................. 32
4.5.2 Installation site ............................................................................... 32
4.5.3 Connecting the unit to the power supply and existing network...... 33
4.5.4 WLAN configuration....................................................................... 34
4.6 Commissioning ............................................................................................ 34
4.6.1 Insert the storage tray baseplate ................................................... 34
4.6.2 Switching the unit ON and OFF ..................................................... 35
4.6.3 Positioning the door insulation....................................................... 35
4.6.4 Installing and configuring the unit .................................................. 37
4.6.4.1 Installing the unit........................................................... 38
4.6.4.2 Automatic unit search................................................... 38
4.6.4.3 Manual unit search ....................................................... 39
4.6.4.4 Remove the unit ........................................................... 39
4.6.5 Configuration following initial startup of the unit............................. 39
4.6.6 Main screen following startup of the unit........................................ 40
4.6.7 Job list and multi-select.................................................................. 41
4.6.8 Selecting the job and starting the process..................................... 42

Table of contents Dentsply Sirona
Operating Instructions CEREC SpeedFire
465 71 165 D3639
D3639.201.01.08.0201.2020
5Operation ................................................................................................................ 43
5.1 Loading the furnace for sintering ................................................................. 43
5.2 Starting the glazing process......................................................................... 45
5.2.1 Loading the furnace for glazing...................................................... 47
5.2.2 Using the glazing spray.................................................................. 48
5.2.2.1 Preparing the restoration.............................................. 48
5.2.2.2 Fixing the restoration to the restoration holder............. 48
5.2.2.3 Spraying the glaze onto the restoration surface........... 48
5.3 Crystallization / glazing process IPS e.max CAD ........................................ 49
5.3.1 Restoration preparation for crystallization/glazing: ........................ 50
5.4 VITA SUPRINITY® PC crystallization/glazing process................................ 52
5.5 Fireproof tray with integrated fan ................................................................. 53
6Care and maintenance ........................................................................................... 54
6.1 Insulation material of the furnace chamber.................................................. 54
6.2 Replacing the main fuses............................................................................. 55
6.3 Replacing the filter ....................................................................................... 56
6.4 Care, cleaning, and disinfecting agents ....................................................... 57
7Service options ....................................................................................................... 58
7.1 Temperature test.......................................................................................... 58
7.2 Calibration.................................................................................................... 58
8Disposal .................................................................................................................. 59
8.1 Disposal ....................................................................................................... 59
Index ....................................................................................................................... 60

Dentsply Sirona
Operating Instructions CEREC SpeedFire
1 General data
1.1 Dear Customer,
65 71 165 D3639
D3639.201.01.08.0201.2020 5
1General data
1.1 Dear Customer,
Thank you for purchasing your CEREC SpeedFire high-temperature
furnace from Dentsply Sirona.
It will support you with your work for many years, as it was developed
and built with state-of-the-art technology.
Nevertheless, improper use and handling can cause damage and
hazards. Please therefore read and follow these operating instructions
carefully. Always keep them within easy reach.
Also pay attention to the safety instructions to prevent personal injury
and material damage.
Your CEREC SpeedFire team
1.2 Contact data
Customer Service Center In the event of technical queries, please use our online contact form at
the following address:
http://srvcontact.sirona.com
Manufacturer's address Sirona Dental Systems GmbH
Fabrikstrasse 31
64625 Bensheim
Germany
Tel.: +49(0) 6251/16-0
Fax: +49(0) 6251/16-2591
e-Mail: [email protected]
www.dentsplysirona.com

1 General data
1.3 General information about this operating manual
Dentsply Sirona
Operating Instructions CEREC SpeedFire
665 71 165 D3639
D3639.201.01.08.0201.2020
1.3 General information about this operating manual
Observe the Operating Instructions Please familiarize yourself with the unit by reading through these
Operating Instructions before putting it into operation. It is essential that
you comply with the specified warning and safety information.
Keep documents safe Always keep the Operating Instructions handy in case you or another
user require(s) information at a later point in time. Save the Operating
Instructions on the PC or print them out.
If you sell the unit, make sure that the Operating Instructions are
included with it either as a hard copy or on an electronic storage device
so that the new owner can familiarize himself with its functions and the
specified warning and safety information.
Online portal for technical documents We have set up an online portal for the Technical Documents at
www.dentsplysirona.com/manuals. From here, you can download these
Operating Instructions along with other documents. Please complete the
online form if you would like a hard copy of a particular document. We
will then be happy to send you a printed copy free of charge.
Help If you have difficulties despite having thoroughly studied the Operating
Instructions, please contact your dental depot.

Dentsply Sirona
Operating Instructions CEREC SpeedFire
1 General data
1.4 General conventions and structure of the document
65 71 165 D3639
D3639.201.01.08.0201.2020 7
1.4 General conventions and structure of the
document
1.4.1 Structure of the document
1.4.1.1 Identification of the danger levels
To prevent personal injury and material damage, please observe the
warning and safety information provided in these instructions for use.
Such information is highlighted as follows:
DANGER
An imminent danger that could result in serious bodily injury or death.
WARNING
A possibly dangerous situation that could result in serious bodily
injury or death.
CAUTION
A possibly dangerous situation that could result in slight bodily injury.
NOTE
A possibly harmful situation which could lead to damage of the
product or an object in its environment.
IMPORTANT
Application instructions and other important information.
Tip: Information for simplifying work.

1 General data
1.5 Scope of these Operating Instructions
Dentsply Sirona
Operating Instructions CEREC SpeedFire
865 71 165 D3639
D3639.201.01.08.0201.2020
1.4.1.2 Formats and symbols used
The formats and symbols used in this document have the following
meaning:
Prerequisite
1. First action step
2. Second action step
or
➢ Alternative action
Result
➢ Individual action step
Requests you to do something.
See "Formats and symbols used
[→8]"
Identifies a reference to another
text passage and specifies its
page number.
● List Designates a list.
"Command / menu item" Indicates commands / menu
items or quotations.
1.4.2 Notes to the repository
It is mandatory to keep this operating manual in an easily accessible
place for the purpose of later reference. In the event of a sale or transfer
of the device to another user, make sure that the device is supplied
along with the operating manual, so that the new owner can get
acquainted with the operation and the appropriate precautions and
warnings
1.5 Scope of these Operating Instructions
Equipment options This document describes the full version of your system. It may
therefore cover components that are not included in the system you
purchased.

Dentsply Sirona
Operating Instructions CEREC SpeedFire
1 General data
1.6 Warranty and liability
65 71 165 D3639
D3639.201.01.08.0201.2020 9
1.6 Warranty and liability
Maintenance In the interest of the safety and health of patients, users or third parties,
it is necessary that maintenance work is carried out at fixed time
intervals to ensure the operational safety and reliability of your product.
The operator must ensure the implementation of the maintenance work.
As a manufacturer of electro-medical equipment, we can consider
ourselves responsible for the safety characteristics of the device only if
maintenance and repairs are carried out only by us or by companies
authorized explicitly by us for this purpose and if components are
replaced with original spare parts in case of failure.
Exclusion of liability If the operator does not meet the obligation to carry out such
maintenance or fault messages are ignored, Dentsply Sirona or its
authorized dealer does not assume any liability for damage caused.

1 General data
1.7 Intended use
Dentsply Sirona
Operating Instructions CEREC SpeedFire
10 65 71 165 D3639
D3639.201.01.08.0201.2020
1.7 Intended use
The unit may only be used in conjunction with the CAD/CAM system of
Dentsply Sirona for the purpose of producing ceramic restorations.
The CEREC SpeedFire is suitable for sintering, painting and glazing
ZrO2 ceramics and for painting and glazing glass ceramics. Only heat
treatment processes sent as a job to the unit from the Dentsply Sirona
CAD/CAM software may be performed. Heat treatments must be
applied exclusively to the restorations and materials assigned by the
software.
The heat treatment is specified automatically by the CAD/CAM software
and is based on the material and dimensions of the restoration. The
relevant material manufacturer is responsible for the temperature
control and the process times resulting from this. All programs are
validated by the material manufacturers and approved for use in the
CEREC SpeedFire.
This unit must not be used for any other purpose. If the unit is used for
any purpose other than the one mentioned above, it may be damaged.
Intended use also includes compliance with these Operating
Instructions and the relevant maintenance instructions.
CAUTION
Follow the instructions
If the instructions for operating the unit described in this document are
not observed, the intended protection of the user may be impaired.
NOTE
Use of acidic coloring liquids
If acidic coloring liquids are used, the acid may escape during the
sintering process and damage the heating element.
➢ Recommendation: Only use water-based coloring liquids from
Dentsply Sirona.

Dentsply Sirona
Operating Instructions CEREC SpeedFire
1 General data
1.8 Legend
65 71 165 D3639
D3639.201.01.08.0201.2020 11
1.8 Legend
20XX
Year of manufacture
"Hot surface" symbol
"Warning of hand injuries" symbol
Warning of hand injuries in the vicinity of devices with closing me-
chanical parts.
Product disposal symbol (see "Disposal [→59]").
Accompanying documents This symbol can be found on the rating plate on the unit.
Meaning: Observe the Operating Instructions when operating the unit.
This symbol can be found on the rating plate on the unit.
Meaning: The accompanying documents are available on the Dentsply
Sirona homepage.

1 General data
1.8 Legend
Dentsply Sirona
Operating Instructions CEREC SpeedFire
12 65 71 165 D3639
D3639.201.01.08.0201.2020
Symbols on the packaging
Take note of the following symbols on the packaging:
Top
Protect from moisture
Fragile; handle with care
Do not stack
Temperature during storage and transport
Relative humidity during storage and transport
Air pressure during storage and transport

Dentsply Sirona
Operating Instructions CEREC SpeedFire
2 Safety instructions
2.1 Basic safety information
65 71 165 D3639
D3639.201.01.08.0201.2020 13
2Safety instructions
2.1 Basic safety information
2.1.1 Prerequisites
NOTE
Important information on building installation
The building installation must be performed by a qualified expert in
compliance with the national regulations. DIN VDE 0100-710 applies
in Germany.
NOTE
Restrictions regarding installation site
The system is not intended for operation in areas subject to explosion
hazards.
NOTE
Do not damage the unit!
The unit can be damaged if opened improperly.
It is expressly prohibited to open the unit with tools!
2.1.2 Maintenance and repair
● The maintenance and repair of this unit may be performed only by
Dentsply Sirona or by agencies authorized by Dentsply Sirona.
● Components which have failed and influence the safety of the unit
must be replaced with original (OEM) spare parts.
● Only original cables may be used, so that EMC requirements are
met.
Please request a certificate whenever you have such work performed. It
should include:
● The type and scope of work.
● Any changes made in the rated parameters or working range.
● Date, name of company and signature.
2.1.3 Modifications to the product
Modifications to this product which might affect the safety of the system
owner, patients or other persons are prohibited by law!
2.1.4 Accessories
In order to ensure product safety, this device may be operated only with
original Dentsply Sirona accessories or third-party accessories
expressly approved by Dentsply Sirona. In particular, only the power
cable also supplied or the corresponding original spare part may be
used with the unit. The user is responsible for any damage resulting
from the use of non-approved accessories.

2 Safety instructions
2.2 Connecting the unit
Dentsply Sirona
Operating Instructions CEREC SpeedFire
14 65 71 165 D3639
D3639.201.01.08.0201.2020
2.1.5 In case of damage
In case of noticeable malfunctions or damage, stop using the instrument
immediately and notify your authorized dealer or the manufacturer.
2.2 Connecting the unit
Perform connection by following the directions given in the present
operating instructions.
2.3 Connection of external equipment
If any equipment not approved by Sirona is connected, it must comply
with the applicable standards:
● EN 60 950 for information technology equipment, and
● EN 61 010-1 for laboratory equipment.

Dentsply Sirona
Operating Instructions CEREC SpeedFire
2 Safety instructions
2.4 Patient environment
65 71 165 D3639
D3639.201.01.08.0201.2020 15
2.4 Patient environment
Patient environment
1500mm
59”
1500mm
59”
1500mm
59”
1500mm
59”
1500mm
59”
1500mm
59”
1500mm
59” 1500mm
59”
1500mm
59”
1500mm
59”
1500mm
59”
CEREC SpeedFire is a laboratory device and may not therefore be
used in the patient environment (A).
This applies to all possible patient positions (B) during the examination
or treatment.

2 Safety instructions
2.5 Ventilation slots
Dentsply Sirona
Operating Instructions CEREC SpeedFire
16 65 71 165 D3639
D3639.201.01.08.0201.2020
2.5 Ventilation slots
Under no circumstances may the ventilation slots on the rear of the unit
be covered, since otherwise the air circulation will be obstructed. This
can cause the unit to overheat.
Do not spray into the ventilation slots Do not spray liquids such as disinfectants into the ventilation slots. This
may lead to malfunctions. Use wipe disinfection only in the vicinity of the
ventilation slots.
2.6 Product-specific safety instructions
CAUTION
Risk due to improper operation
The unit may only be operated by employees who are familiar with
the content of these operating instructions. Signs and labels on the
unit must be kept in legible condition at all times. They may not be
removed.
CAUTION
Danger due to incorrect installation
The unit may only be set up in dry rooms and must never be in
contact with any liquids. Furniture items and other equipment in the
vicinity of the furnace must not contain any explosive, flammable or
easily ignitable materials. It is prohibited to keep or store ignitable or
flammable gases or liquids in the room where the furnace is set up.
WARNING
Risk of burns or damage / risk of the temperature measuring element
shifting
There is a risk of burns or of contact with insulating material if you
reach into the furnace chamber.
There is also a risk of the temperature measuring element being
damaged or shifting.
➢ Please wear safety gloves and use the tweezers when loading or
unloading the furnace.
➢ Never touch the temperature measuring element.

Dentsply Sirona
Operating Instructions CEREC SpeedFire
2 Safety instructions
2.7 Insulation material of the furnace chamber
65 71 165 D3639
D3639.201.01.08.0201.2020 17
WARNING
Risk of burns due to objects falling out
As there is a serious risk of burns in this case, it is essential to install
a fire-proof table and floor covering.
I. For safety reasons, the furnace must be operated when standing.
This is the only way that the user can quickly avoid any parts that fall
out.
II. You are advised to wear heat-proof protective clothing when
carrying out super speed sintering. In accordance with professional
association regulations, the operator of the site is responsible for
providing the user with appropriate protective clothing.
III. The operator of the site is responsible for providing the user with
appropriate safety instructions.
IV. If a fracture occurs during the sintering process as a result of a
failure to follow the recommended drying procedure, there is a risk
that hot objects will fall out as soon as the furnace door is opened.
V. The furnace should only be loaded and unloaded using the
tweezers. For safety reasons, a trained user must be present when
the furnace is being loaded or unloaded.
WARNING
Risk of burns due to hot surfaces
The unit may develop hot surfaces in some areas after extended use.
Use the necessary caution around the unit, especially when the
furnace is operated for extended periods.
➢ Never touch the hot surfaces.
2.7 Insulation material of the furnace chamber
CAUTION
Handling and disposing of the insulating material
Abrasion of insulating material in the furnace door area may occur,
which is visible as white dust. These deposits should:
- be wiped off with a moist cloth or
- be extracted with a vacuum cleaner with a fine particle filter (e.g.
HEPA / Dust category H),
- not be blown away with compressed air,
- not be blown away by the wind.
Direct skin contact may lead to skin irritation. Please therefore avoid
contact with the skin and eyes and wear gloves and safety goggles as
necessary. In the event of contact with the skin wash the dust of the
insulating material off with clear running water.
Always dispose of the insulating material in a closed container (see
also "Disposal [→59]").
Please also observe the information provided under “Positioning the
door insulation [→35]”.

3 Product description
3.1 Main components of the product
Dentsply Sirona
Operating Instructions CEREC SpeedFire
18 65 71 165 D3639
D3639.201.01.08.0201.2020
3Product description
3.1 Main components of the product
Basic unit
A Basic unit
CEREC SpeedFire
D Bottom door insulation
B Control panel E Top door insulation
C Start button
Rear of the basic unit
A Main switch ON/OFF C Main fuses F1 and F2
B Power connection D Communication interface for
the control panel

Dentsply Sirona
Operating Instructions CEREC SpeedFire
3 Product description
3.1 Main components of the product
65 71 165 D3639
D3639.201.01.08.0201.2020 19
Rear side of the control panel
A Connector plug for the
communication control
panel
C 2x USB
B "Ethernet" connection for
LAN

3 Product description
3.2 Explanation of the symbols
Dentsply Sirona
Operating Instructions CEREC SpeedFire
20 65 71 165 D3639
D3639.201.01.08.0201.2020
3.2 Explanation of the symbols
3.2.1 Main screen
A Temperature of the furnace chamber
B Settings
C Information
D Start
E Overview of received jobs (job list)
F Preheat
G Multi-select option: Selection of several jobs
H Status information field and information on next step
3.2.2 Information
The following data is available in the Information menu:
● "Machine name"
● "serial number"
● "furnace firmware"
● "user app"
● "MAC-address:"
● "Calibration date"