Depstech WF020X User manual

Multi-Language User Manual
FHD Inspection Camera
WF020X-025-028

English
01
Product Structure
1. Power Button ON / OFF
2. Camera LEDs dimmer:
Roll to control the brightness of the camera LEDs
3. WiFi signal indicator:
Blue LED flash: Ready to pair
Blue LED stay on: Connect successfully
4. Power indicator:
Red LED stay on: Power system work normally
Red LED flash: Low battery
Green LED stay on: Charging status
5. Reset Button:
Long press the reset button for 7S，the product will restore
to factory settings.
6. Micro-USB charging port
125
3
4 6

02
Step 1- APP Downloading
Register
After downloading the APP, it is necessary to register a personal
account before using.
Register and log in
Fill in email - fill in password - view agreement - click register.
Please log in after successful registration. (Note: Please keep your
mobile phone connected with network during registration)
For iOS user (iOS 9+), search and download
“DEPSTECH-View” app from APP Store.
For Android user (Android 7.0+), search and download
“DEPSTECH-View” from Google Play Store.
iOS & Android
Android iOS

03
Step 2- Power on
Push the power button to “ON” to open the endoscope.
Step 3- WiFi Connection
A. Turn to the WiFi setting on your smart devices (Android /
iOS phone), search for the factory setting WiFi SSID:
DEPSTECH_****** or Jetion_******
B. Then choose and fill the factory setting WiFi password:
12345678
Note: Before using the product for the first time, please fully charge it.
Note: “******” will be a series of random numbers& letters, and it
may take several seconds to wait for the WiFi signal and the wifi
connection. Please be patient for the process.
                  
                
DEPSTECH******
Jetion******

04
Step 4- Return to the APP
Note:
If the endoscope and your smart device connected successfully,
you can receive the real-time images of the endoscope via the
DEPSTECH-View APP, and the blue LED of the endoscope
Wi-Fi transmiter will stay on.

05
2
3
4
5
6
1
APP Introduction
Rotate Button: Click to rotate the image 90°
Photo Shoot Button: Click to take a photo
Record Button: Click to start / end a video record
Buttons Hidden Function:
Click the screen to hide / wake the buttons.
Zoom in / Zoom out Function:
Two fingers expand outwards to zoom in the real- time image.
Two fingers get close to zoom out the real- time image.
Gallery Button: Click to check the photos / videos
Setting Button: Click to enter the setting
Camera Switch Button: Click to switch main / side camera
2
3
4
5
1
6

06
APP Introduction (For WiFi SSID: DEPSTECH_******)
Resolution: Click to choose different resolution.
WiFi Setting: Click to modify the WiFi SSID and Password.
After setup please remember to click reset button.
Channel Switch: Click to switch 2.4G&5G WiFi signal.

07
Note:
We wouldn’t recommend our customers to modify the Wi-Fi
SSID/Password.
Which may do disadvantages for next usage. (Once you’ve
forgotten the modified Wi-Fi SSID / Password) So you’d better write
down the modified Wi-Fi SSID / Password if you have to do it.
APP Introduction (For WiFi SSID: Jetion_******)
You can reset the WiFi name / password once you have
got the smart device connected with the endoscope.
Modify WiFi name: Click it to enter WiFi name
Modify password: Click it to enter WiFi password
Modify Resolution: Click it to switch the resolution
Reboot device：Shut down the device
After setup, please remember to click “Modify WiFi name
/ password / resolution” button.

08
Charging Guide
DC 5V/2A
16.5FT (Without any obstacles)
IP67(For camera part only)
Maximum
Resolution
Sensor
Working Voltage
and Electric Current
WiFi Transmission
Distance
Model
Viewing Angle
Depth of View
Diameter
WiFi Frequency
Waterproof Grade
WF020X WF028 WF028 Dual Cam
2MP CMOS 5MP CMOS 2*2MP CMOS
1920*1080px 2592*1944px 1920*1080px
67°±3° 2*72°(144°)
1.18-3.15 in Main cam: 1.18-3.15 in
Side cam: 0.79-1.97 in
0.33 in 0.22 in 0.33 in 0.31 in
2.4G
WF025
2MP CMOS
1920*1080px
Specification
1. Connect the device to the DC 5V USB adapter for charging;
2. During the charging process, the green LED indicator light will be
steady on.
3. When the device is fully charged, the green LED indicator will go out.
Guide for Accessories Installation
Turn counterclockwise-remove
accessories
Turn clockwise-tighten
accessories

09
FAQ& Help
Q1: How to connect WiFi endoscope to "DEPSTECH-View"?
A1: 1. Make sure the device is fully charged, long press the power button
or press the switch to turn on the device. The WiFi module will
turn on about 15 seconds after turning on the device. You can
observe whether the WiFi signal light (blue light) of the device is
always on. If it is on, it indicates that the WiFi module is ready;
2. Enter the phone's "Settings" - "WiFi Connection" to find the WiFi
name printed on the device; select and connect, the default
password is "12345678". If the phone prompts "Internet may be
unavailable", please ignore the prompt and select "Keep
Connected";
3. Open this App and get real-time images of the endoscope. While
the App is acquiring the device image, the WiFi signal light will
flash. If the image cannot be obtained during the flashing process,
please contact the seller of the device.
Q2: The mobile phone cannot get the real-time image of the WiFi
endoscope or the screen went black?
A2: Please follow the steps below to solve the problems.
1. Please try to restart the device after fully charged.
2. There is a reset hole near the charging port of the device. Please
use reset pin to insert the reset hole. Please make sure that
you've reached the reset button with the reset pin, and the device
will turn on again.
3. Please turn off the "WiFi" function of other mobile phones that
have been connected to this WiFi endoscope at home.
4. Turn on the phone in airplane mode, search for the WiFi signal
identified on the device body, select and connect it, the default
password is "12345678";
5. It should be noted that during the installation of this App, you need
to authorize the "photo/media content" and "document storage"
permissions of this App, otherwise some functions such as taking

10
FAQ& Help
Q3: Can search for the Wi-Fi signal, but couldn’t get the connection?
A3:
Q4: When the product is in use, it flickers, freezes or disconnects?
A4:
1. The Wi-Fi connection may be failing, you’ve to forget the network
and reconnect it. Also, you can change to an some place without
Wi-Fi distribute and retry the connection.
2. For Android user, at the first time of connecting to the Wi-Fi signal,
the phone may tip "Internet may not be available", please click
"Keep Wi-Fi connection" option.
3. For iOS user, please make sure that you’ve turn on the "Cellular
data" and "Native network" option in the settings -
“DEPSTECH-View”.
4. For user who used to modified the Wi-Fi-SSID / password before,
please use a reset pin and plug it into the reset port of the
endoscope. You can refer to lable on the bottom to the default Wi-Fi
SSID / Password and reconnect it.
1. Please make sure that the Wi-Fi endoscope is within 5 meters of
your mobile phone and there is no obstacle between them.
2. When using this Wi-Fi endoscope, please stay away from other
hotspots with strong Wi-Fi signal, or turn off other hotspots.
3. Check whether the power of the device is normal and whether the
power indicator is flashing; if the power is insufficient, please fully
charge it before use;
Note:
If the malfunction cannot be solved after the above operations,
please contact us via email [email protected]
pictures/viewing albums may be hindered;
6. For iOS users (especially iOS 14), please enter the "Settings"
interface of the phone, find and click “DEPSTECH-View”, then turn
on the "Cellular Data" and "Native network"option, otherwise it may
not be able to establish communication with the device.