DEVOLA DVPH1200B User manual

Wi-Fi Patio Heater - User Manual
Models: UK - DVPH1200B/DVPH2000B/DVPH2400B
EU - DVPH12BEP/DVPH20BEP/DVPH24BEP
Please read the instructions carefully before use.

Thank you for your purchase.
Please kindly note that we are not responsible for any damages resulting from failure to comply
with the following instructions
Electrical appliances should always follow basic safety precautions to reduce the risk of fire,
electric shock, and personal injury, including the following:
WARNING: To avoid overheating, do not cover the heater!
The "no cover" symbol on the heater means that no objects should cover the appliance or
heating element. If any object (including ash, salt, chemical liquid etc.) is covered in the heater
housing or element, do not use and disconnect the power supply
If the heater is used in a humid environment (such as the seaside) or in areas with high salt
content in the air, please check whether there is any salt, alkali or other solid crystals on the
surface of the cover or heating element before opening each time. If you find any of the above,
do not use it, or stop using it immediately and disconnect the power
WARNING: Risk of fire hazard when installed near curtains and other combustible materials!
The distance between the heater and combustible materials should be at least 1.5 metres. The
sides and rear of the heater should not come into direct contact with all kinds of materials.
The heater must be installed at a height of at least 1.8m above the ground.
This heater is used for 220-240V AC power supply. Please select the qualified socket according to
the current of the product model, refer to the specification chart.
Note: Model DVPH2400B heater must be connected to a qualified outlet above 16A.
The heater should not be used by persons (including children) who have physical, sensory or
mental deficiencies or lack of experience or knowledge of use, unless there is a person
responsible for their safety who supervises or directs them in connection with the use of the
appliance.
•Children should be looked after to make sure they don't play with the heater.
•The fire protection cover of the heater is to prevent direct contact with the heating
element. W hen using the heater, the fire protection cover must be installed in place.
•The heater does not adequately protect young children or infirm people.
•This heater must be used on a properly grounded outlet.
•When using, make sure that the plug and socket are clean and free of dust.
•When disconnecting the heater from the power source, turn off the heater switch, then
unplug it from the power outlet and pull it out, not pulling the power cord.
•Do not touch the plug with wet hands.
•Do not extend the heater's power cord.
•Regularly check the power cord and plug for wear or damage, do not use damaged wires,
plugs or loose sockets, and never use a heater that has failed, been discarded or
damaged for any possible reason.
•If the power cord is damaged, it must be replaced by the manufacturer, the service
department, or a qualified professional to avoid danger.
•Do not use the heater if the heating element is broken or damaged.
•The heater cannot be placed directly under the power outlet or terminal box.
•When using the heater, do not place the power cord on the heater body, do not place it
in front of the heater, and do not hang it in front of the heater.

•Do not use the heater where gasoline, paint, flammable liquids, or flammable dust are
stored.
•If the heater is used in the bathroom, please be careful to ensure that the heater switch
or controller does encounter the user of the bathtub or shower at any time.
•Do not install the heater in a location where it may fall into a bathtub or other water
container.
•Care should be taken when leaving the heater running and unattended.
•Do not leave the heater running while sleeping.
•Do not insert anything into the heater.
•Do not touch the heater while in use.
•Before adjusting the heater, position or working on it, be sure to always disconnect the
heater from the power supply and allow it to cool.
Product specifications
Model
DVPH1200B /DVPH12BEP
DVPH2000B /DVPH20BEP
DVPH2400B/DVPH24BEP
Voltage
220-240VAC
220-240VAC
220-240VAC
Current
5.2A
8.7A
10.4A
Power
1200W
2000W
2400W
Product size
770 x 160 x 80 mm
870 x 160 x 80 mm
970 x 160 x 80 mm
Installation
Clearances:
During installation, please ensure that the heater is a minimum of 1.8 metres above the ground
so that it cannot be directly touched during operation.
Make sure that the heater is always at least 0.5m wide from the ceiling and adjacent walls.
•This heater must be installed by a qualified electrician.
•Before and during installation, always ensure that the heater is disconnected from the
power supply and is cool.
•The heater can be installed horizontally or vertically.
•When installing horizontally or to a ceiling, do not place the heater at an angle of more
than 90 degrees, or below 45 degrees.
•If the heater installation angle is vertical or close to vertical, make sure the power cord is
always under the heater.
•During the use of the heater, there is a certain increase in the temperature of the heater
body. Make sure that the power cord never touches the heater body and is away from
the heater housing
•Do not install heaters on the surface of any flammable materials.
•If you are using the heater outdoors be sure to use a weatherproof qualified outlet.
•Make sure that there are no wires or water pipes in the area where the heater is going to
be installed before you begin drilling.
•The heater must be installed on the mounting bracket provided by the manufacturer
(see Figure A below).

Figure A:
Remove the expansion rubber and screws from the accessory bag, drill four holes with a
diameter of 8mm on the wall. The hole depth is 70mm, the hole distance is 32mm,
(300mm≤L≤450mm) install the expansion rubber in the fitting in the hole, and then mount the
wall bracket from the accessories. Remove it and fix it to the wall with a 5*60 mm screw.
Figure B:
Place the wall bracket on the corresponding screw on the back of the heater, and then adjust the
wall bracket to the proper position with the nut from the accessory bag, then lock it to ensure it
will not loosen.

Figure C:
Lock the wall bracket mounted on the back of the heater and the wall, adjust the heater to a
suitable position, and lock the lock with the nut and screw from the accessory sleeve to ensure
that it will not loosen
Wall Hanging Diagram:

Operating Instructions
The following operations are suitable for the models listed:
DVPH1200B/DVPH2000B/DVPH2400B/DVPH12BEP/DVPH20BEP/DVPH24BEP
1. Human Body Sensor Icon
2. Power Icon
3. Child Lock Icon
4. Temperature Indicator
5. Heating Level Gear Indicator
6. Intelligent Heating Mode Indicator
7. Heating Operation Indicator
8. Open Window Detection Indicator
9. Active Timer Indicator
10. Wi-Fi Icon
11. Temperature Unit Indicator

1. On/Off button
2. Timer button
3. Up button
4. Power Selection button
5. Smart heating button
6. Child Lock button
7. Down button
8. Set button
9. Display button
10. Body Sensor button
Device Operation:
The following operations are suitable for:
DVPH1200B/DVPH2000B/DVPH2400B/DVPH12BEP/DVPH20BEP/DVPH24BEP
1. Plug the heater power cord into the socket that matches the voltage and current of the body
nameplate.
2. Press the On/Off button to switch the heater on, the display will illuminate.
3. Press the power select button to select the heating gear, there are a total of four gear powers.
The gear position indicator on the display indicates the current heating gear level.
4. Press the Up/Down buttons to select the temperature. The temperature setting range is
5-45 degrees.

5. Press the timer button to enter the timing setting state. Select a shutdown time by using the
Up/Down buttons. The shutdown timing range is 1-24 hours. The timing indicator is illuminated
when the timer is running.
6. Press the Display button once and the digital screen will only display the temperature. Press
the Display button twice to solely display the heating operation icon.
7. Press the Smart heating button and the heater will enter intelligent heating mode. In
intelligent mode the gear position will automatically adjust according to temperature change. The
"Smart" icon will illuminate on the heater's display when the intelligent heating mode is in
operation.
8. Press the Set button followed by the Child lock button to lock the heater. This prevents small
children from carrying out the various functions on the device. To unlock, press the Set button
and then the Child lock button.
9. Press the Body Sensor button for the heater to enter body sensing mode. When body sensing
mode is in operation the device heats up when a moving object is detected. The human body
sensing operation indicator illuminates when human body sensing mode is running. If a moving
object is not detected within two minutes the device will stop heating.
10. Press the Set button followed by the up button to switch between Fahrenheit and Celsius.
11. Press the Set button followed by the down button to reset the Wi-Fi.
12. Press the Set button followed by the power select button to activate the open window
detection function. When the widow detection function is active the 'WO' icon illuminates on the
display. In window detection mode the device stops heating if the ambient temperature drops by
3 degrees within two minutes. At this point the window detection operation icon will illuminate.
13. Press the On/Off button to cease heating if a shutdown timer has not been set.
14. Wi-Fi Operation
Scan the QR code with your mobile phone to download and install
the Smart Life app. Alternatively you can download the app in your
device's app store.
Register an account or log in with existing credentials.
Open the app and select” Add Device" or click on the “+” icon in the
top right- hand corner of the device.
Open the Small Home Appliances category and scroll down to and
select the "Heater" option.
Press "Confirm indicator rapidly blink".
Enter the Wi-Fi network and password, ensuring that is a 2.4GHz
network and not 5GHz.
Make sure the heater, device and router are in proximity whilst the device connects to the app.
The device should now be connected to the Smart Life app. If connection fails, reset the Wi-Fi on
the device.

Note: Due to continued updates, the images in this manual may vary slightly from the latest
procedure. All images in this manual are for reference purposes only
Cleaning and Maintenance
If the inside of the heater or the heating element is covered with dust or dirt, please have it
cleaned by a qualified service provider. Do not operate the heater in this situation.
Disconnect the heater from the power supply. Do not clean before cooling to avoid burns!
The only thing that needs to be cleaned is the exterior surface of the heater.
Do not use strong abrasives or solvent cleaners when cleaning the heater as they may damage
the plastic parts. Wipe the outside of the heater with a wrung and damp cloth.
When not in use, remove it from the mounting position and store the heater carefully in a safe,
dry place out of reach of children. If the heater will not be in use for a long period, especially in
humid or high salinity areas, please clean, dry and store it in safe packaging.
Do not touch the heating element with your fingers as the residue from your hands can affect the
lifetime of the heating element. If you accidentally touch it, remove the marks with a soft damp
cloth.
Do not attempt to repair or adjust any electrical or mechanical functions on this heater
The heater does not contain user-serviceable parts and must be returned to the retailer if
damaged or defective.

WASTE ELECTRICAL RECYCLING
This symbol indicates that this product is classed as Electrical or Electronic
Equipment and should not be disposed of with other household waste.
The Waste Electrical and Electronic Equipment (WEEE) Directive has been introduced
across the European Union for the following purposes:
1. To recycle waste electrical products using the best available recovery
and recycling techniques to minimize the impact on the environment.
2. To treat any hazardous substances.
3. To avoid increasing landfill.
WEEE products should be disposed of by handing it over at a designated collection point.
For more information about where you can drop off your waste product for recycling,
please contact your local authority.

Table for information requirements for electric local space heaters
P
Model identifier(s):
DVPH1200B/
DVPH12BEP
DVPH2000B/
DVPH20BEP
DVPH2400B/
DVPH24BEP
Item
Symbol
Value
Unit
Heat output
Nominal heat output
Pnom
1.2
2.0
2.4
kW
Minimum heat output (indicative)
Pmin
0.12
0.20
0.24
kW
Maximum continuous heat output
Pmax
1.15
1.97
2.36
kW
Auxiliary electricity consumption
At nominal heat output
elmax
1.150
1.978
2.368
kW
At minimum heat output
elmin
0.123
0.192
0.235
kW
In standby mode
elSB
0.0003
0.0003
0.0003
kW
Item
Type of heat input, for electric local space heaters only (select one)
[no]
Manual heat charge control with integrated thermostat
[no]
Manual heat charge control with room and/or outdoor temperature feedback
[no]
Electronic heat charge control with room and/or outdoor temperature feedback
[no]
Fan assisted heat output
[no]
Type of heat output/room temperature control (select one)
Single stage heat output and no room temperature control
[no]
Two or more manual stages, no room temperature control
[no]
With mechanic thermostat room temperature control
[no]
With electronic room temperature control
[no]
Electronic room temperature control plus day timer
[yes]
Electronic room temperature control plus week timer
[no]
Other control options (multiple selections possible)
Room temperature control, with presence detection
[no]
Room temperature control, with open window detection
[yes]
With distance control option
[yes]
With adaptive start control
[no]
With working time limitation
[no]
With black bulb sensor
[yes]
Contact details:
Remark:
For electric local space heaters, the measured seasonal space heating energy efficiency ηs cannot
be worse than the declared value at the nominal heat output of the unit.

Warranty
Guarantee and Service Policy
This product is covered by a standard parts or replacement warranty
for a period of 12 months from the date of purchase.
Extend your warranty for 12 months for free by visiting
www.devola.co.uk/warranty.
Incorrect installation and failure to follow correct operating
instructions are excluded. Consequential costs such as labour
charges or damage to surroundings are expressly excluded.
Contact Us
If you experience a problem with this product you should first contact
us on 0121 250 2180 before taking any further action.
CLAIM YOUR EXCLUSIVE 5% OFF YOUR NEXT ONLINE ORDER
DISCOUNT CODE: DEV5
OFFER VALID FOR 21 DAYS. DON'T MISS OUT!
YOUR DISCOUNT CODE ALSO APPLIES TO OUR SISTER WEBSITES
Our Websites:
www.devola.co.uk
www.energybulbs.co.uk
www.airconcentre.co.uk
www.ledbulbs.co.uk