Displays2go Easel DIGCOM43 User manual

Digital artDigital art
FrameFrame
easel - 43”easel - 43”
SKU: DIGCOM43
Aemy InructionsAemy Inructions

Letter represents the hardware. Number is equal to the quantity of each part.

1. Install the body of the easel and connect the horizonal
and vertical rods with screws.
2. Check the front and back side of the body of the easel
to ensure that it is properly installed. Compare against
the image above.
3. Connect the vertical bar to the train and install the
latch, as pictured.
4. Assemble the tray by attaching to the body of the
easel. Height of the easel can be adjusted by sliding the
latch.

5. Assemble the base frame and the wheels by screwing
together. Holes are pre-drilled.
6. Connect the body of the easel with the base with
screws. Then attach the support bars, which can be used
to adjust the tilt angle.
7. Install the fixing tray and lock it, as shown.
Scan QR code to visit product page.

How to Adjust Height and Tilt Angle of Easel
Adjust tilt angle by sliding the screws.
Adjust height of easel by sliding the latch.
If you have any questions regarding our products, please visit us at www.displays2go.com or contact D2G
customer service at 844-221-3388.