Diamond INN/VN-W5 User manual

Mod: INN/VN-W5
Production code: RD 800 FW
12/2017

SG03355
INSTRUCTIONS FOR INSTALLATION AND
USE COOLING DISPLAY
RD 600 - 800 F
Made in France
Decembre 2017

2
COOLING DISPLAY
RD 600 - 800 F
Congratulations for purchasing this top end professional equipment! You have chosen
equipment that combines optimum technical properties with extreme user comfort.
We want you to get the greatest possible satisfaction out of this equipment.
1. SAFETY INSTRUCTIONS
Please respect these instructions scrupulously to avoid any risk of fire,
electric shock, scald or other wounds and damage. During the use of this
appliance, fundamental circumspection of security must always be noticed,
such as :
- Take into account the instructions to be systematically kept with the
appliance.
- Install the appliance always in instructions respect. A 10 cm distance
minimum with the partition or the wall is necessary.
- Protect the appliance from direct light of the sun, frost and humidity.
- Never leave the appliance within the reach of children or disabled persons
without surveillance.
- The machine has to be used only by qualified person.
- Never move the appliance when it is working.
- Check that the appliance is definitely off before connecting it up or
disconnecting it.
- Do not touch the hot surfaces of the appliance. The temperature of the hot
surfaces can be very important when the appliance is working. Always use
handles and control knobs.
- Do not use the appliance for other functions than determined use.
- Do not leave the electrical cord in contact of hot surfaces.
- The appliance should not be used close to combustible materials.
- During use, look after not to obstruct hearings of aeration of the appliance
- To avoid any electric shock, never plunge the cord or plug in water or quite
other liquid.
- If the cord is harmed, it must be replaced by the producer, its after sale
service or persons of similar skills to avoid any risk.
- Entrust repairs only to a skilled person.
- Use only spare parts of origin.
- Before cleaning the appliance, do not forget to disconnect it.

3
2. CONTENTS OF CARDBOARD PACKAGING
Device : Cooling Display
Accessories :5 glass
Technical documentation of the thermostat
The present note
3. CONFORMITY OF USE
Use the equipment exclusively for keeping food at temperatures included between
2°C and 10°C (except for meat). You get a refrigerating panoramic display RD80
which enables you to highlight your products (desserts, cakes, pies, cocktails,
beverage, etc.).
Fresh products will be presented during working and service hours. Afterwards they
will be stored in a conventional cool chamber.
To take shelter from light is very important for hygiene and it lasts the storage of
foodstuff. The light generates a photochemical reaction on the food, which causes
discoloration, loss of flavour and alimentary characteristics.
In order to soften this phenomenon, avoid to exhibit the machine at the sun.
4. WAY OF FUNCTIONING
The cooling display keeps food at a constant temperature of 2°C pre-adjusted in the
factory.
Press on the switch (n°3 on picture), the machine is on. The preset electronic
thermostat (n°2 on picture) flashes and displays the temperature. Press on the
switch (n°1 on picture) to turn on light.
1
2
3
Switch Light+Turning plates
Switch On/Off
1
2
3
Electronic thermostat

4
5. FUNCTIONING / MANIPULATION
a) Installation / Assembly :
-Place the equipment on a stable surface.
-Position the accessories
-A distance of 10 cm from the partition or the wall is considered enough.
- Never place the device near a wall or near a partition made of combustible
materials even if it is very well isolated.
- Caution : the display cooling must not be exposed at the sun.
b)First starting :
First cleaning
Clean the device before the first use. (See 6 Cleaning)
Connection of the device
-Make sure that the voltage and frequency of the electrical system comply with
the values indicated on the nameplate.
-Always check that the electric power supply cable or plug are free of damage.
-Make sure that every control knob is positioned on 0.
-Remove the flange at the bottom left (when facing the display) to pay out the
entire length of the cord and feed it through the square hole then close it before
inserting the plug into the socket.
-Connect the electric power supply cable to a socket with a protection wire.
-The display is now connected.
NB: To connect the display to a socket without any protection wire, or to connect
directly to the electrical system, ask for a qualified electrician to make the
connection.
c) Use of device :
Elements of command and display
Command/Display
Function
Electronic thermostat (n°1 on picture)
Temperature setting
Switch 0/I (n°2 on picture)
Light On/Off
Switch 0/I (n°3 on picture)
On/Off

5
Starting
- Press on the on/off switch (n°3 on picture) to start the unit. The electronic
thermostat turns on.
- Wait for the unit to be at the right temperature (stop of the compressor).
- Press on the light switch (n°1 on picture) to start the light.
Temperature setting
The electronic thermostat is preset in factory. It can be adjusted if necessary.
To modify the temperature, refer to the technical documentation of the
thermostat.
Regulation of defrost
The defrost is an important operation for ventilated refrigerating displays like RD
600 - 800 F.
A homogeneous temperature is ensured thanks to the air circulation through the
evaporator. This evaporator has a negative temperature when the compressor is
working. In this way, its blades “trap” the humidity as frost, and the air of the
chamber dries. If there is too much frost, the air cannot circulate through the
evaporator and the internal temperature rises.
In order to avoid this phenomenon, the defrost programmed in the factory stops the
compressor 10min every 2 hours.
These valuescan be adjusted by your technician. It depends on the type of products
presented in the refrigerating display, on the use and the environment.
To stop the display during the night and the closing days enables a total defrost.
Stopping the appliance
Set each switch (n°1 and 3 on picture) on 0: the appliance is no longer
functioning.
Disconnect the power supply cable.
Clean the appliance. (See 6. Cleaning)
d) Breakdown / repair :
In case of breakdown or of damaged part, please call your after-sales service and
confide any technical operation to a qualified person.
When you contact the after-sales service of your distributor or your store, provide
him with the complete reference of your device (commercial name, type and serial
number). This information appears on the visible descriptive plate behind the device.

6
6. CLEANING AND MAINTENANCE
Disconnect the device
- Clean regularly the metallic parts after each use by using only use non-abrasive
products, warm water and wash liquid: avoid the abrasive toweling. Rinse your
device with a wet sponge and dry it with a soft cloth.
- Dry the device with a clean soft cloth.
- Never clean the device under a water jet, the infiltrations would risk to damage it in
an irreparable way.
- Never immerse the cord or the plug in the water or quite other liquid to avoid any
electric shock
- Every week the condenser must be removed from any dust with a vacuum-cleaner.
First, always disconnect the display before doing this operation. Then, to have an
access to the condenser, remove the front grid of the display. The container for the
evaporation of condensation particles must be cleaned with a wet sponge as well.
To have an access, remove the side grid of the display.
CAUTION : In places with a high rate of humidity (>60%), it is obligatory to
proceed to a total defrost every week.
7. TECHNICAL SPECIFICATIONS
Model
RD 600 F
RD 800 F
Effective Volume
360 l
480 l
Dimensions
650x600x1865
650x800x1865
Weight
150 Kg
180 Kg
Power
430 W
500 W
Gas
R 134 A
R 134 A
Temperature
+2° à +10° C
+2° à +10° C
Voltage
220-240 V ~
220-240 V ~
Frequency
50-60 Hz
50-60 Hz
Grids
465 x 455 (x5)
665 x 455 (x5)
Glasses
T3
T3
Wires colours correspondence:
Phase Brown or Black or Grey
Neutral Blue
Earth Yellow-Green

7
8. GUARANTEE
Conditions of guarantee
The guarantee applicable to any device is the commercial guarantee of the
distributor or the retailer. Please contact the store where you bought your device to
know the precise conditions.
The guarantee grants no right for damages.
The dispositions which follow are not exclusive of the profit of the legal guarantee
planned by articles 1641 and following ones of the Civil code relative to the defects
and the latent defects.
Exclusion clauses of the guarantee
Bad installation and bad maintenance, in particular if they do not respect
current regulations or instructions appearing in this user guide.
Guarantee cannot apply for bad manipulations during service, inapropriate usage,
negligences, device overload and electric power supply variations, overload or
defective installation.
Damages due to impacts or bad weather are not covered by the guarantee. Final
user is responsible for the transport. If delivred by a transporter, the recipient must
issue reserves before delivery.
Guarantee ends with interventions, reparations, modifications by non-qualified
persons, or inappropriate usage.
9.MAINTENANCE GUIDE
ANOMALIE
CAUSE
REMEDE
The display does not start
Switch on position « off »
Switch on position « on»
No information on the thermostat
Check the plug
The display does not stop
No refrigerating power
Clean the condenser
The display does not
regulate
Helicoïd ventilator is blocked
Remove foreign or
Eventually replace the ventilator
The temperature rises up
Presence of ice
Make a total defrost
Presence of water droplets
on the top
Appearance of ice
Adjust the parameters of defrost
Presence humidity marks on
the display
High level of humidity in the air
Presence of condensation
on the display
Display in defrost phase
Presence of water under the
display
Container for condensation
particles is full, total defrost too late
Empty and clean the container
and reposition the holds

8
10. NORMS AND LEGALS DISPOSALS
The device is conform to :
73/23 CEE: 19/02/1973
86/336 CEE: 03/05/1989
CEE: 92/31
CEE: 28/04/1992
CEE: 22/07/1993
EN 60335-1
EN 55104
EN 60555-2
EN 60555-3
In order to comply with the directive 2004/108/CE concerning the electromagnetic
compatibility, and according to the norm EN 61000-3-11, the maximal impedance of
the network accepted (Zmax) at the plug in point has to be under 0,42 Ω.The
technician has to check this value, with the distributor if necessary.
11.ELIMINATION OF THE ELECTRIC AND ELECTRONIC WASTE
The device respects the directives :
2002/96/CE (DEEE) N°34270064800021
2002/95/CE (ROHS)
Reach rule
Never put the device among household waste.
The device must be put down in a center of recycling for the electric equipments.
The materials of the device are indeed reusable. By eliminating correctly the electric
and electronic wastes, the recycling and quite other shape of re-use of worn
equipments, you participate in a significant way in the environmental protection.
For any information about the collection of electric and electronic waste, please
contact your distributor.

RD 600 F
VUE ECLATEE / EXPLODED VIEW
Vue éclatée
MONTANT (x2)
76105SE (x2)
A07025 (x2)
BANDEAU AV
76106SE (x2)
MONTANT AVG
SH01033 (x4)
BANDEAU (x2)
TRAVERSE (x3)
GRILLE (x3)
J.Godéré
SA03018
SA03019
CONTRE PORTE
SH03030
76283 (x2)
76266 (x2)
76282 (x2)
76259 (x2)
PORTE
GRILLE AV
SB06051
SA07026
A10018
76117
CORDON
76257 (x4)
SF08015 (x4)
SA03110
76156
76276
CADRE AV
SB04070
SB04066
CADRE (x3)
SA18037 (x4)
76263 (x5)
PROFIL
SA03113
76285
76288
76269
76270SE
76287
76256
76242SE
SH01137 (x5)
76264 (x5)
SI07001 (x2)
SA13017 (x2)
76256
SA03114
76234
SA03080
SH03015_2500
SA03093COM
MONTANT AVD
BANDEAU D
B08004
CADRAN
SA06057
15/12/2016 Indice
C
Dessiné par :
R.LApprouvé par :
RD 600 F
DT142 Date :
04/12/2017

RD 600 F
NOMENCLATURE / BILL OF MATERIALS
Nomenclature
J.Godéré
CODE QTE PIECE SPARE PART
76105SE 2 S/E MONTANT INT DROIT RD 60 B RIGHT INTERIOR UPRIGHT RD 60 B
76106SE 2 S/E MONTANT INT GAUCHE RD 60 B LEFT INTERIOR UPRIGHT RD 60 B
76117 1 SOCLE RDS 60 BASE RDS 60
76156 1 PLATEAU RD 60 +LED TRAY RD 60
76234 1 SUPPORT BAC PLASTIQUE RD 60 PLASTIC TRAY HOLDER RD 60
76242SE 1 S/E BAC EVAPORATEUR RD 60 B EVAPORATOR TRAY RD 60 B
76256 2 CACHE MONTANT RD 600/800 UPRIGHT COVER RD 600/800
76257 4 RONDELLE ROUE RD 800 WHEEL WASHER RD 800
76259 2 PROFILE PORTE LATERALE EXT RD 800 EXTERIOR SIDE DOOR PROFILE RD 800
76263 5 SUPPORT ETAGERE DROIT RD 800 RIGHT SHELF HOLDER RD 800
76264 5 SUPPORT ETAGERE GAUCHE RD 800 LEFT SHELF HOLDER RD 800
76266 2 PROFILE PORTE LATERALE INT RD 800 INTERIOR SIDE DOOR PROFILE RD 800
76269 1 PLATINE CHARNIERE SUP RD 800 UPPER HINGE RD 800
76270SE 1 S/E PLATINE CHARNIERE INF RD 800/600 BOTTOM HINGE FRAME RD 800/600
76276 1 PLAQUE ISOLATION RD 600 INSULATION PLATE RD 600
76282 2 PROFILE PORTE TRANSVERSALE EXT RD 600 EXTERIOR TRANSVERSAL DOOR PROFILE RD 600
76283 2 PROFILE PORTE TRANSVERSALE INT RD 600 INTERIOR TRANSVERSAL DOOR PROFILE RD 600
76285 1 TOIT RD 600 ROOF RD 600
76287 1 REFLECTEUR RD 600/RD 60B REFLECTOR RD 600/RD 60 B
76288 1 PROTECTION VENTILATEUR RD 600/RD 60 B VENTILATOR PROTECTION RD 600/RD 60 B
A07025 2 INTERRUPTEUR NOIR ETANCHE BIP 20A/250V BLACK SWITCH BIP 20A/250V
A10018 1 SERRE CABLE DM6 RF1 CORD CLOSER DM6 RF1
B08004 1 RIVET TERRE EARTH RIVET
CADRAN 1 CADRAN FRONT PANEL
CORDON 1 CORDON CORD
SA03018 1 VENTILATEUR VENTILATOR
SA03019 1 GRILLE VENTILATEUR VENTILATOR GRID
SA03080 1 BOITIER RACCORDEMENT ELECTRIQUE ELECTRICAL CONNECTION BOX
SA03093COM 1 ALIMENTATION LED ASSEMBLEE ASSEMBLY LED ALIMENTATION
SA03110 1 GROUPE FROID RD 60 ASSEMBLY COOLING UNIT RD 60
SA03113 1 EVAPORATEUR RD 60 EVAPORATOR RD 60
SA03114 1 BAC PLASTIQUE EVAPORATION RD 80 PLASTIC CONTAINER RD 80
SA06057 1 THERMOSTAT ELECTRONIQUE ELECTRONIC THERMOSTAT
SA07026 1 MICROSWITCH MICROSWITCH
SA13017 2 PIED PLASTIQUE RD/RDN 600-800 PLASTIC FOOT RD/RDN 600-800
SA18037 4 LED Lg= 1100 mm LED Lg= 1100 mm
SB04066 1 DESHYDRATEUR DEHYDRATOR
SB04070 1 VALVE DE CHARGE 888 1/4 CHARGING VALVE 888 1/4
SB06051 1 BAGUE POUR PORTE RDN 60 RING DOOR RDN 60
SF08015 4 ROUE WHEEL
SH01033 4 VITRE COTE RD 60 F/RD 60 T SIDE GLASS RD 60 F/RD 60 T
SH01137 5 VERRE ETAGERE VBP 60 P/N SHELF GLASS VBP 60 P/N
SH03015_2500 1 TUYAU SILICONE 8 x 12 SILICONE PIPE 8 x 12
SH03030 1 JOINT MAGNETIQUE RD 60 NM MAGNETIC SEAL RD 60 NM
SI07001 2 VIS TH 10 x 140 SCREW TH 10 x 140
INOX / NOIR / BLANC STAINLESS-STEEL / BLACK / WHITE
BANDEAU 2
BANDEAU AV 1
BANDEAU D 1
CADRE 3
CADRE AV 1
CONTRE PORTE
1
GRILLE 3
GRILLE AV 1
MONTANT 2
MONTANT AVD 1
MONTANT AVG 1
PORTE 1
PROFIL 1
TRAVERSE 3
76103 / 76103TRAN / 76103B
76237 / 76237GRIN / 76237B
76239SE / 76239SEMONN / 76239SEB
76280 / 76280N / 76280B
76281SE / 76281SEN / 76281SEB
76284SEV / 76284SENV / 76284SEBV
76239SE2 / 7239SE2N / 7239SE2B
H03004_350 / H03004_350 / SH03002_350
76286SE / 76286SEN / 76286SEB
COULEUR / COLOR
76244 / 76244N / 76244B
76244SE / 76244N / 76244B
76239SE1 / 7239SE1N / 7239SE1B
76102 / 76102CADN / 76102B
76353 / 76353N / 76353B
15/12/2016 Indice
C
Dessiné par :
R.LApprouvé par :
RD 600 F
DT142 Date :
04/12/2017

RD 600 F
SCHEMA ELECTRIQUE / ELECTRICAL DRAWING
Schéma électrique
Damien L.
15/12/2016 Indice
C
Dessiné par :
R.LApprouvé par :
RD 600 F
DT142 Date :
04/12/2017

RD 600 F
SCHEMA FRIGORIFIQUE / COOLING DRAWING
Damien L.
Schéma frigorifique
15/12/2016 Indice
C
Dessiné par :
R.LApprouvé par :
RD 600 F
DT142 Date :
04/12/2017

RD 800 F
VUE ECLATEE / EXPLODED VIEW
Vue éclatée
76288
A07025 (x2)
SA03113
76320
76242SE
SA03018 (x2)
MONTANT (x2)
SA06057
76267 (x2)
JOINT
BANDEAU AV
76256 (x2)
76106SE (x2)
MONTANT AVG
SH01033 (x2)
BANDEAU G SA18037 (x4)
76105SE (x2)
76272
SA03019 (x2)
TRAVERSE (x2)
CADRE (x2)
SA13017 (x2)
SB04070
SH01138 (x5)
76269
76263 (x5)
TRAVERSE AR
GRILLE AR
SH03015_2500
MONTANT AVD
CONTRE PORTE GRILLE (x2)
76266 (x2)
76260 (x2)
76259 (x2)
PORTE
GRILLE AV
76270SE
SB06051
B08004
SA03093COM
SA03080
SA03110
76273
SA03114
76271
A10018
CORDON
SB04066
76257 (x4)
BANDEAU AR
76246
76258
76323 (x48)
76264 (x5)
PROFIL
SF08015 (x4)
BANDEAU D
CADRAN
SH01036
CADRE AV AR (x2)
SI07001 (x2)
SA07026
Date :
15/12/2016 Indice
B
Dessiné par :
R.L
Approuvé par :
RD 800 F
DT140 Date :
04/12/2017

RD 800 F
NOMENCLATURE / BILL OF MATERIALS
Nomenclature
J.Godéré
CODE QTE PIECE SPARE PART
76105SE 2 S/E MONTANT INT DROIT RD 60 B RIGHT INTERIOR UPRIGHT RD 60 B
76106SE 2 S/E MONTANT INT GAUCHE RD 60 B LEFT INTERIOR UPRIGHT RD 60 B
76242SE 1 S/E BAC EVAPORATEUR RD 60 B EVAPORATOR TRAY RD 60 B
76246 1 PLATEAU RD 800 TRAY RD 800
76256 1 CACHE MONTANT RD 600/800 UPRIGHT COVER RD 600/800
76257 4 RONDELLE ROUE RD 800 WHEEL WASHER RD 800
76258 1 PLAQUE ISOLATION RD 800 INSULATION PLATE RD 800
76259 2 PROFILE PORTE LATERALE EXT RD 800 EXTERIOR SIDE DOOR PROFILE RD 800
76260 2 PROFILE PORTE SUPERIEURE EXT RD 800 EXTERIOR TOP DOOR PROFILE RD 800
76263 5 SUPPORT ETAGERE DROIT RD 800 RIGHT SHELF HOLDER RD 800
76264 5 SUPPORT ETAGERE GAUCHE RD 800 LEFT SHELF HOLDER RD 800
76266 2 PROFILE PORTE LATERALE INT RD 800 INTERIOR SIDE DOOR PROFILE RD 800
76267 2 PROFILE PORTE TRANSVERSALE INT RD 800 INTERIOR TRANSVERSAL DOOR PROFILE RD 800
76269 1 PLATINE CHARNIERE SUP RD 800 UPPER HINGE RD 800
76270SE 1 S/E PLATINE CHARNIERE INF RD 800/600 BOTTOM HINGE FRAME RD 800/600
76271 1 SUP BAC PLASTIQUE RD 800 PLASTIC CONTAINER HOLDER RD 800
76272 1 TOIT RD 800 ROOF RD 800
76273 1 SOCLE RD 800 BASE RD 800
76288 1 PROTECTION VENTILATEUR RD 600/RD 60 B VENTILATOR PROTECTION RD 600/RD 60 B
76320 1 REFLECTEUR RD 800 REFLECTOR RD 800
76323 48 CONTRE POIDS RD 800 AGAIN ST WEIGHT RD 800
A07025 2 INTERRUPTEUR NOIR ETANCHE BIP 20A/250V BLACK SWITCH BIP 20A/250V
A10018 1 SERRE C ABLE DM6 RF1 CORD CLOSER DM6 RF1
B08004 1 RIVET TERRE EARTH RIVET
CADRAN 1 CADRAN FRONT PANEL
CORDON 1 CORDON CORD
SA03018 2 VENTILATEUR VENTILATOR
SA03019 2 GRILLE VENTILATEUR VENTILATOR GRID
SA03080 1 BOITIER RACCORDEMENT ELECTRIQUE ELECTRICAL CONNECTION BOX
SA03093COM 1 ALIMENTATION LED ASSEMBLEE ASSEMBLY LED ALIMENTATION
SA03110 1 GROUPE FROID RD 60 ASSEMBLY COOLING UNIT RD 60
SA03113 1 EVAPORATEUR RD 60 EVAPORATOR RD 60
SA03114 1 BAC PLASTIQUE EVAPORATION RD 80 PLASTIC CONTAINER RD 80
SA06057 1 THERMOSTAT ELECTRONIQUE ELECTRONIC THERMOSTAT
SA07026 1 MICROSWITCH MICROSWITCH
SA13017 2 PIED PLASTIQUE RD/RDN 600-800 PLASTIC FOOT RD/RDN 600-800
SA18037 4 LED Lg= 1100 mm LED Lg= 1100 mm
SB04066 1 DESHYDRATEUR DEHYDRATOR
SB04070 1 VALVE DE CHARGE 888 1/4 CHARGING VALVE 888 1/4
SB06051 1 BAGUE POUR PORTE RDN 60 RING DOOR RDN 60
SF08015 4 ROUE WHEEL
SH01033 2 VITRE COTE RD 60 F/RD 60 T SIDE GLASS RD 60 F/RD 60 T
SH01036 1 VITRE AVANT/ARRIERE RD 80 FRONT/BACK GLASS RD 80
SH01138 5 VERRE ETAGERE VBP 80 P/N SHELF GLASS VBP 80 P/N
SH03015_2500 1 TUYAU SILICONE 8 x 12 SILICONE PIPE 8 x 12
SI07001 2 VIS TH 10 x 140 SCREW TH 10 x 140
PIECE QTE COULEUR : INOX / NOIR / BLANC COLOR : STAINLESS-STEEL / BLACK / WHITE
BANDEAU AR 1
BANDEAU AV 1
BANDEAU D 1
BANDEAU G 1
CADRE 2
CADRE AV AR 2
CONTRE PORTE
1
GRILLE 2
GRILLE AV 1
GRILLE AR 1
JOINT 1
MONTANT 2
MONTANT AVD 1
MONTANT AVG 1
PORTE 1
PROFIL 1
TRAVERSE 2
TRAVERSE AR 1
76243SE / 76243SEN / 76243SEB
76244 / 76244N / 76244B
76245 / 76245N / 76245B
76247 / 76247N / 76247B
76248 / 76248N / 76248B
76244SE / 76244SEN / 76244SEB
76261 / 76261N / 76261B
76275 / 76275N / 76275B
SH03029 / SH03029 / SH03031
H03004_350 / H03004_350 / SH03002_350
76250 / 76250N / 76250B
76102 / 76102CADN / 76102B
76103 / 76103TRAN / 76103B
76237 / 76237GRIN / 76237B
76239SE / 76239MONN / 76239B
76239SE1 / 76239DN / 76239DB
76239SE2 / 76239GN / 76239GB
76262SEV / 76262SENV / 76262SEBV
Date :
15/12/2016 Indice
B
Dessiné par :
R.LApprouvé par :
RD 800 F
DT140 Date :
04/12/2017

RD 800 F
SCHEMA ELECTRIQUE / ELECTRICAL DRAWING
Schéma électrique
Date :
15/12/2016 Indice
B
Dessiné par :
R.LApprouvé par :
RD 800 F
DT140 Date :
04/12/2017

RD 800 F
SCHEMA FRIGORIFIQUE / COOLING DRAWING
Schéma frigorifique
Date :
15/12/2016 Indice
B
Dessiné par :
R.LApprouvé par :
RD 800 F
DT140 Date :
04/12/2017