dj power DJV STAGEEFFECTS F-650 User manual

Fog machine
Fog machine
F-650
Users Manual

Fog machine F-650
Art.No.: 114083
Table of contents
1. Sa ety instructions
................................
1.1.
For sa e and e icient operation
2.
Intended use o the device
2.1.
Overhead installation
2.1.1.
Electrical connections
3. Introduction
................................
3.1. Item delivered
................................
3.2.
Product description
4. Start-up
................................
4.1. Operation
................................
5. Technical data
................................
Art.No.: 114083
2 / 12
................................
................................
...............................
For sa e and e icient operation
................................
................................
Intended use o the device
................................
................................
Overhead installation
................................
................................
Electrical connections
................................
................................
................................
................................
................................
................................
................................
................................
Product description
................................
................................
................................
................................
................................
................................
................................
................................
................................
................................
................................
...............................
3
................................
... 3
................................
.............. 4
................................
..................... 5
................................
............. 6
................................
......... 7
................................
. 7
................................
........................ 7
................................
................ 8
................................
......... 8
................................
... 9

Fog machine F-650
Art.No.: 114083
1.
Safety instructions
•
This device is suitable or indoor use (not outdoors) only.
•
Unauthorized modi ications will invalidate the warranty.
•
Repairs are to carry out by skilled workers only.
•
Use only uses o the same type and original parts as spare parts.
•
To avoid ire and electric shocks protect the unit rom rain and humidity.
1.1.
For safe and efficient operation
Be careful with heat and ex
Do not place the device in a location where it is exposed to extreme
temperatures.
Operate the device only in an ambient temperature between 0°C (32°F)
40°C (104°F). Do not expose the device to direct sunlight or heat sources.
Keep
away from humidity water and dust!
Avoid placing the device in a location with high humidity or excessive
dust.
Place no liquids on or near the system.
Place the device on a firm ground!
To avoid vibrations always place the device on a irm ground.
Do no
t use chemicals for cleaning!
Use a clean and dry cleaning rag to remove dust. Metal parts can be
cleaned with a damped cleaning rag. Be ore cleaning always unplug the
device rom the power supply.
If the device is not working properly!
I problems occur
unplug the device rom the power supply. The user should
not try to service the device independently. All repairs and service must be
per ormed by a quali ied technician.
Take proper care with the power cord!
Never pull the power cord to disconnect the de
supply, but remove the plug with plug housing in the hand. I you do not
use the device or an extended period, unplug the device rom the power
supply.
ATTENTION!
Damages caused by the disregard o this user manual are not subject to
w
arranty. The dealer will not accept liability or any consequent secondary
ailures. Only skilled workers are allowed to carry out the electrical
connections. All electrical and mechanical connections have to be carried
out according to the European sa et
Art.No.: 114083
3 / 12
Safety instructions
This device is suitable or indoor use (not outdoors) only.
Unauthorized modi ications will invalidate the warranty.
Repairs are to carry out by skilled workers only.
Use only uses o the same type and original parts as spare parts.
To avoid ire and electric shocks protect the unit rom rain and humidity.
For safe and efficient operation
Be careful with heat and ex
treme temperatures!
Do not place the device in a location where it is exposed to extreme
Operate the device only in an ambient temperature between 0°C (32°F)
40°C (104°F). Do not expose the device to direct sunlight or heat sources.
away from humidity water and dust!
Avoid placing the device in a location with high humidity or excessive
Place no liquids on or near the system.
Place the device on a firm ground!
To avoid vibrations always place the device on a irm ground.
t use chemicals for cleaning!
Use a clean and dry cleaning rag to remove dust. Metal parts can be
cleaned with a damped cleaning rag. Be ore cleaning always unplug the
device rom the power supply.
If the device is not working properly!
unplug the device rom the power supply. The user should
not try to service the device independently. All repairs and service must be
per ormed by a quali ied technician.
Take proper care with the power cord!
Never pull the power cord to disconnect the de
vice rom the power
supply, but remove the plug with plug housing in the hand. I you do not
use the device or an extended period, unplug the device rom the power
Damages caused by the disregard o this user manual are not subject to
arranty. The dealer will not accept liability or any consequent secondary
ailures. Only skilled workers are allowed to carry out the electrical
connections. All electrical and mechanical connections have to be carried
out according to the European sa et
y standards.
This device is suitable or indoor use (not outdoors) only.
Unauthorized modi ications will invalidate the warranty.
Use only uses o the same type and original parts as spare parts.
To avoid ire and electric shocks protect the unit rom rain and humidity.
Do not place the device in a location where it is exposed to extreme
Operate the device only in an ambient temperature between 0°C (32°F)
-
40°C (104°F). Do not expose the device to direct sunlight or heat sources.
Avoid placing the device in a location with high humidity or excessive
To avoid vibrations always place the device on a irm ground.
Use a clean and dry cleaning rag to remove dust. Metal parts can be
cleaned with a damped cleaning rag. Be ore cleaning always unplug the
unplug the device rom the power supply. The user should
not try to service the device independently. All repairs and service must be
vice rom the power
supply, but remove the plug with plug housing in the hand. I you do not
use the device or an extended period, unplug the device rom the power
Damages caused by the disregard o this user manual are not subject to
arranty. The dealer will not accept liability or any consequent secondary
ailures. Only skilled workers are allowed to carry out the electrical
connections. All electrical and mechanical connections have to be carried

Fog machine F-650
Art.No.: 114083
2.
Intended use of the device
This device was developed or pro essional use on stages, in discos, theatres
etc. The device is only approved or a connection up to 230 V 50/60 Hz
alternating current and only or indoor use.
Regular breaks during operation increase the li etime o your device.
Avoid convulsions or any orm o orce ul impact during the installation or the
start up o the device.
Take care that no cables are lying around. You would endanger your own
sa ety an
d also the sa ety o a third party.
It is not allowed to operate or store the device in an environment in which
spray water or rain is expected. Humidity or very high atmospheric humidity
could reduce the isolation o the device and could cause deathly e
shocks.
I using og machine you have to ensure that the og saturation o the room
must allow a good visibility o at least 10m.
Operate the device not during thunderstorms. Surge voltages could destroy
the device. Unplug the power supply during
Surrounding objects or sur aces should not be in contact with the device.
Make sure that during the installation and removal o the device the area
below the place o installation is basically cordoned o . This also applies to
implementa
tion o service.
Make amiliar yoursel with the unctions o the device be ore start
without the experience should not handle with the device. The most cause o
unctional disorder is inappropriate handling.
Keep the device away rom children
Never aim the nozzle on people a keep a distance rom 50 cm to the nozzle.
ATTENTION. The ejected og is very hot!
Keep a minimum distance o 50 cm to other objects.
Use only the recommended, high quality water
Other luids may cause damages. Do not use lammable additives, such as
oil, gas, per umes, etc. in your luid.
Never aim the nozzle on open ire or lammable objects.
Make sure
to top o the luid in time. I the machine operated without luid it
can cause damages to the pump or the heating block. Be ore top o the
luid please unplug the device rom the power supply.
Never drink the luid. I it does happen, please contact a
had contact with the eyes or mucous membranes, rinse immediately with
water bodies.
Operate the unit only in a horizontal position.
Art.No.: 114083
4 / 12
Intended use of the device
This device was developed or pro essional use on stages, in discos, theatres
etc. The device is only approved or a connection up to 230 V 50/60 Hz
alternating current and only or indoor use.
Regular breaks during operation increase the li etime o your device.
Avoid convulsions or any orm o orce ul impact during the installation or the
Take care that no cables are lying around. You would endanger your own
d also the sa ety o a third party.
It is not allowed to operate or store the device in an environment in which
spray water or rain is expected. Humidity or very high atmospheric humidity
could reduce the isolation o the device and could cause deathly e
I using og machine you have to ensure that the og saturation o the room
must allow a good visibility o at least 10m.
Operate the device not during thunderstorms. Surge voltages could destroy
the device. Unplug the power supply during
thunderstorms.
Surrounding objects or sur aces should not be in contact with the device.
Make sure that during the installation and removal o the device the area
below the place o installation is basically cordoned o . This also applies to
tion o service.
Make amiliar yoursel with the unctions o the device be ore start
without the experience should not handle with the device. The most cause o
unctional disorder is inappropriate handling.
Keep the device away rom children
and never operate it unattended.
Never aim the nozzle on people a keep a distance rom 50 cm to the nozzle.
ATTENTION. The ejected og is very hot!
Keep a minimum distance o 50 cm to other objects.
Use only the recommended, high quality water
-
based luid rom your dealer.
Other luids may cause damages. Do not use lammable additives, such as
oil, gas, per umes, etc. in your luid.
Never aim the nozzle on open ire or lammable objects.
to top o the luid in time. I the machine operated without luid it
can cause damages to the pump or the heating block. Be ore top o the
luid please unplug the device rom the power supply.
Never drink the luid. I it does happen, please contact a
doctor. I the luid
had contact with the eyes or mucous membranes, rinse immediately with
Operate the unit only in a horizontal position.
This device was developed or pro essional use on stages, in discos, theatres
etc. The device is only approved or a connection up to 230 V 50/60 Hz
Regular breaks during operation increase the li etime o your device.
Avoid convulsions or any orm o orce ul impact during the installation or the
Take care that no cables are lying around. You would endanger your own
It is not allowed to operate or store the device in an environment in which
spray water or rain is expected. Humidity or very high atmospheric humidity
could reduce the isolation o the device and could cause deathly e
lectric
I using og machine you have to ensure that the og saturation o the room
Operate the device not during thunderstorms. Surge voltages could destroy
Surrounding objects or sur aces should not be in contact with the device.
Make sure that during the installation and removal o the device the area
below the place o installation is basically cordoned o . This also applies to
Make amiliar yoursel with the unctions o the device be ore start
-up. People
without the experience should not handle with the device. The most cause o
and never operate it unattended.
Never aim the nozzle on people a keep a distance rom 50 cm to the nozzle.
based luid rom your dealer.
Other luids may cause damages. Do not use lammable additives, such as
to top o the luid in time. I the machine operated without luid it
can cause damages to the pump or the heating block. Be ore top o the
doctor. I the luid
had contact with the eyes or mucous membranes, rinse immediately with

Fog machine F-650
Art.No.: 114083
Never use solvents or aggressive detergents or cleaning. Use instead o this a
damped cleaning rag.
To prevent damages during transport use or transport the original packing or
provided accessories.
For reasons of safety unauthorized changes are forbidden!
A usage o the device which di ers rom usages which are described in this
manual can cause dam
ages o the device. In this case the warranty expires.
Additional you should notice that every di erent usage is related with
dangers and can cause e.g. an electrical short, ire, electric shock or crash.
2.1.
Overhead installation
Danger of life!
You have to observe the regulations of BGV C1 (formerly VBG
70) and EN60598
personnel only.
The suspension devices have to be build and measured so they can
withstand or an hour the ten old o the payload wi
permanent detrimental de ormation.
Basically installation has to be made by using a second separate suspension.
This can be e.g. a suitable net. The second suspension must be designed and
attached so no part o the installation can all d
During construction, reconstruction and deconstruction unnecessary stay in
the range o moving areas, on lightning bridges, under elevated work stations
or any other danger zones is orbidden.
The operator is obliged to ollowing sa ety
•
Be ore the irst start
to be checked by an expert.
•
Review in the rame o the inspection test at least all our years by a
expert. .
•
Review by a quali ied person at least once a year.
How to carry out the overhead installation:
Ideally the device should be installed outside lounge areas o people.
IMPORTANT!
Overhead installation requires a high level o experience. This
i
ncludes knowledge o calculating the payload, used installation material
and sa ety inspections o the used material and the projector whereas the
required experience is not limited to this. Do not try to carry out installation
yoursel under any circumsta
pro essional installer. An inappropriate installation can lead to injuries and/or
damaged properties.
Art.No.: 114083
5 / 12
Never use solvents or aggressive detergents or cleaning. Use instead o this a
To prevent damages during transport use or transport the original packing or
For reasons of safety unauthorized changes are forbidden!
A usage o the device which di ers rom usages which are described in this
ages o the device. In this case the warranty expires.
Additional you should notice that every di erent usage is related with
dangers and can cause e.g. an electrical short, ire, electric shock or crash.
Overhead installation
Danger of life!
You have to observe the regulations of BGV C1 (formerly VBG
70) and EN60598
-2-17
Installations are to carry out by skilled
personnel only.
The suspension devices have to be build and measured so they can
withstand or an hour the ten old o the payload wi
thout su ering a
permanent detrimental de ormation.
Basically installation has to be made by using a second separate suspension.
This can be e.g. a suitable net. The second suspension must be designed and
attached so no part o the installation can all d
own in case o ailure.
During construction, reconstruction and deconstruction unnecessary stay in
the range o moving areas, on lightning bridges, under elevated work stations
or any other danger zones is orbidden.
The operator is obliged to ollowing sa ety
-
related and mechanical acilities:
Be ore the irst start
-
up or a ter critical changes be ore restarting it has
to be checked by an expert.
Review in the rame o the inspection test at least all our years by a
Review by a quali ied person at least once a year.
How to carry out the overhead installation:
Ideally the device should be installed outside lounge areas o people.
Overhead installation requires a high level o experience. This
ncludes knowledge o calculating the payload, used installation material
and sa ety inspections o the used material and the projector whereas the
required experience is not limited to this. Do not try to carry out installation
yoursel under any circumsta
nces i you are not quali ied. Contact a
pro essional installer. An inappropriate installation can lead to injuries and/or
Never use solvents or aggressive detergents or cleaning. Use instead o this a
To prevent damages during transport use or transport the original packing or
A usage o the device which di ers rom usages which are described in this
ages o the device. In this case the warranty expires.
Additional you should notice that every di erent usage is related with
dangers and can cause e.g. an electrical short, ire, electric shock or crash.
You have to observe the regulations of BGV C1 (formerly VBG
Installations are to carry out by skilled
The suspension devices have to be build and measured so they can
thout su ering a
Basically installation has to be made by using a second separate suspension.
This can be e.g. a suitable net. The second suspension must be designed and
own in case o ailure.
During construction, reconstruction and deconstruction unnecessary stay in
the range o moving areas, on lightning bridges, under elevated work stations
related and mechanical acilities:
up or a ter critical changes be ore restarting it has
Review in the rame o the inspection test at least all our years by a
n
Ideally the device should be installed outside lounge areas o people.
Overhead installation requires a high level o experience. This
ncludes knowledge o calculating the payload, used installation material
and sa ety inspections o the used material and the projector whereas the
required experience is not limited to this. Do not try to carry out installation
nces i you are not quali ied. Contact a
pro essional installer. An inappropriate installation can lead to injuries and/or

Fog machine F-650
Art.No.: 114083
It is not allowed to install the device in the grip area o people.
I the device may hang rom the ceiling or r
systems is mandatory. The device may not be installed so it can swing reely in
the room.
Please note: Crashing down items can cause serious injuries! Do not install the
projector, i you doubt the sa ety o a possible insta
Be ore installation make sure that the mounting sur ace has the ability to carry
the ten old point load o the own weight o the device.
Mount the device with the mounting
appropriate clamp.
During
overhead installation the device must be always secured by a sa ety
rope which is designed to hold the twelve old weight o device. Only sa ety
ropes with quick-
release sa ety astener elements may be used. Hang up the
sa ety rope in the hole o the mounti
or an appropriate astening point. Hang up the end in the astening element
and tie up the locking nut. A sa ety rope once exposed to ailing load or
damaged may not be used urthermore.
The maximum drop exceed mu
A sa ety rope once exposed to ailing load or damaged may not be used
urthermore.
Adjust the desired inclination angle via the mounting bracket
and tighten the screw.
2.2.
Electrical connections
Connect the ixture to the mains with the en
The earth has to be connected.
Cable (EU)
Cable (US)
Brown
Black
Light blue
White
Yellow/Green
Green
Art.No.: 114083
6 / 12
It is not allowed to install the device in the grip area o people.
I the device may hang rom the ceiling or r
om high beams, the use o truss
systems is mandatory. The device may not be installed so it can swing reely in
Please note: Crashing down items can cause serious injuries! Do not install the
projector, i you doubt the sa ety o a possible insta
llation orm!
Be ore installation make sure that the mounting sur ace has the ability to carry
the ten old point load o the own weight o the device.
Mount the device with the mounting
-
bracket to your trussing system using an
overhead installation the device must be always secured by a sa ety
rope which is designed to hold the twelve old weight o device. Only sa ety
release sa ety astener elements may be used. Hang up the
sa ety rope in the hole o the mounti
ng bracket. Direct the rope over the truss
or an appropriate astening point. Hang up the end in the astening element
and tie up the locking nut. A sa ety rope once exposed to ailing load or
damaged may not be used urthermore.
The maximum drop exceed mu
st not exceed 20cm.
A sa ety rope once exposed to ailing load or damaged may not be used
Adjust the desired inclination angle via the mounting bracket
Electrical connections
Connect the ixture to the mains with the en
closed power cable and plug.
The earth has to be connected.
Cable (US)
Pin
International
Black
Live L
White
Neutral N
Green
Earth
It is not allowed to install the device in the grip area o people.
om high beams, the use o truss
systems is mandatory. The device may not be installed so it can swing reely in
Please note: Crashing down items can cause serious injuries! Do not install the
llation orm!
Be ore installation make sure that the mounting sur ace has the ability to carry
bracket to your trussing system using an
overhead installation the device must be always secured by a sa ety
rope which is designed to hold the twelve old weight o device. Only sa ety
release sa ety astener elements may be used. Hang up the
ng bracket. Direct the rope over the truss
or an appropriate astening point. Hang up the end in the astening element
and tie up the locking nut. A sa ety rope once exposed to ailing load or
A sa ety rope once exposed to ailing load or damaged may not be used
Adjust the desired inclination angle via the mounting bracket
closed power cable and plug.
International

Fog machine F-650
Art.No.: 114083
3. Introduction
Thank you or choosing a device rom DJPower. Be ore usage please read this
manual care ully.
3.1.Item delivered
-1x Fog machine F-
650
-1x Power cord (
ixed
-1x Remote M1
wired
-Manual
(German / English)
3.2.
Product description
Art.No.: 114083
7 / 12
Thank you or choosing a device rom DJPower. Be ore usage please read this
650
ixed
)
wired
(3,5 m)
(German / English)
Product description
1. Bracket
2. Nozzle
3. Tank
4.
Connector or remote
5.
Oil level indicate
6. Fuse
7. Power INPUT
Thank you or choosing a device rom DJPower. Be ore usage please read this
Connector or remote
Oil level indicate

Fog machine F-650
Art.No.: 114083
4. Start-up
Attention!
Remove be ore start-
up every packing material.
1.
Fill the tank with luid. Make sure that there is always enough luid in the
tank.
2.
Connect the device to the power
3.
The device starts to heat up. This process needs
4.
The heating process is inished.
4.1.Operation
The operation can be made by the wired remote.
Connect the wired remote with the device.
1. LED
2. Fog button
Art.No.: 114083
8 / 12
up every packing material.
Fill the tank with luid. Make sure that there is always enough luid in the
Connect the device to the power
supply.
The device starts to heat up. This process needs
3 min.
The heating process is inished.
The LED on the remote lights green.
The operation can be made by the wired remote.
Connect the wired remote with the device.
This LED lig
hts green i the device is heated up
and ready to use.
This button activates the og output.
Fill the tank with luid. Make sure that there is always enough luid in the
The LED on the remote lights green.
hts green i the device is heated up
This button activates the og output.

Fog machine F-650
Art.No.: 114083
5. Technical data
Voltage
Power consumption max.
Fuse
Heating power
Heating time
Tank volume
Output volume
Fluid consumption
@100%
Remote
Power in
Dimensions
Weight
Art.No.: 114083
9 / 12
AC 220 V –
240 V; 50/60 Hz
Power consumption max.
400 W
3 A/250 V
400 W
3 min
0,5 Liter
59 m³/min
@100%
11 ml/min
Yes (wired)
Schutzko
215 x 140 x 130 mm
1,4 kg
240 V; 50/60 Hz

Fog machine F-650
Art.No.: 114083
For your notes:
Art.No.: 114083
10 / 12

Fog machine F-650
Art.No.: 114083
For your notes:
Art.No.: 114083
11 / 12

Fog machine F-650
Art.No.: 114083
Art.No.: 114083
12 / 12
Importer:
B&K Braun GmbH
Industriestraße 2
D-76307 Karlsbad
www.bkbraun.com
in [e-mail]